License plate bracket

-kj- · February 14th, 2012, 12:47 PM

Hi Everyone,
I just purchased a ninja 250 and I have some stuff to fix before I can get it registered. The previous owner cut off the fender and drilled a single hole in the plastic to mount the license plate( he also had to drill a hole in the center of the license plate frame) . Is there any solutions to mount the license plate? By the way, I also need a license plate light to pass inspection.

caps · February 14th, 2012, 01:07 PM

pics?

-kj- · February 14th, 2012, 01:39 PM

Quote:

Originally Posted by caps

pics?

here are the picture from my phone.

EsrTek · February 14th, 2012, 03:00 PM

You can leave it like that if you need to and add some LED lights Linky.
Or replace the whole lic plate holder w/ one w a LED built in Linky

1 last thing I can think of, and what I would probably do, replace it w/ a fender eliminator for our bikes. Linky

Edit: If your going to add LED anything to your bike you will need this Diode kit Linky scroll to bottom of page, the Diode kit is the last thing on that page.

February 14th, 2012, 12:47 PM	#1
-kj- ninjette.org member Name: KJ Location: bay area Join Date: Feb 2012 Motorcycle(s): 09 Ninja 250r Posts: 28	License plate bracket Hi Everyone, I just purchased a ninja 250 and I have some stuff to fix before I can get it registered. The previous owner cut off the fender and drilled a single hole in the plastic to mount the license plate( he also had to drill a hole in the center of the license plate frame) . Is there any solutions to mount the license plate? By the way, I also need a license plate light to pass inspection.

February 14th, 2012, 01:07 PM	#2
caps Sexy Beast Name: Mat Location: Tampa Join Date: Mar 2011 Motorcycle(s): 2010 Ninja 250R, 2006 ZX-14, 2012 Ducati Monster Posts: A lot.	pics? __________________________________________________ 2010 Ninja 250 2006 Ninja ZX-14 ^Both Links

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
License Plate Relocator Bracket	Cazper	2008 - 2012 Ninja 250R Farkles	49	March 18th, 2011 11:31 PM

February 14th, 2012, 03:00 PM	#4
EsrTek ninjette.org certified postwhore Name: Eric Location: Murfreesboro, TN Join Date: Jun 2011 Motorcycle(s): '13 300 Posts: A lot.	You can leave it like that if you need to and add some LED lights Linky. Or replace the whole lic plate holder w/ one w a LED built in Linky 1 last thing I can think of, and what I would probably do, replace it w/ a fender eliminator for our bikes. Linky Edit: If your going to add LED anything to your bike you will need this Diode kit Linky scroll to bottom of page, the Diode kit is the last thing on that page.