OEM signals on the back. LED on the front??

law129 · February 26th, 2014, 12:51 PM

I have OEM blinkers in the back. When i switch them on, they just come on not flash. If i switch the right on, it comes on but doesn't blink. Vice versa witht the left. I bought the integrated LED turn siganl mirrors for the front. I knew they wouldnt work properly but thought they would at lest come on. They wont even light up. the wires to the front are hot. I tested them and they are okay. When I purchase the relay, will that fix the problem? Any help wuold be great.

greenswoave · February 26th, 2014, 02:26 PM

I have LED front flush mount turn signals and stock rear. Replace the relay and you'll be good. The LEDs don't draw enough current to trip the stock relay.

law129 · February 26th, 2014, 02:59 PM

Thanks. What model # is that? at autozone?

greenswoave · February 26th, 2014, 03:02 PM

Sorry, not sure. I bought mine with my turn signals from http://www.modmy250.com/. The site owner is a forum member here.

NevadaWolf · February 26th, 2014, 03:15 PM

Tri (@CThunder-blue) is the guy at modmy250.com who is helping on the other thread.

The relay you want is the Tridon/Novita EP34. Make sure you get that brand as off brand relays, even with the same number, do cause issues with the flasher.

law129 · February 26th, 2014, 03:39 PM

Thanks a lot for the info. Will try this tonight and post tomorrow

February 26th, 2014, 12:51 PM	#1
law129 ninjette.org newbie Name: Lee Location: Tupelo Join Date: Feb 2014 Motorcycle(s): 2008 ninja 250r Posts: 5	OEM signals on the back. LED on the front?? I have OEM blinkers in the back. When i switch them on, they just come on not flash. If i switch the right on, it comes on but doesn't blink. Vice versa witht the left. I bought the integrated LED turn siganl mirrors for the front. I knew they wouldnt work properly but thought they would at lest come on. They wont even light up. the wires to the front are hot. I tested them and they are okay. When I purchase the relay, will that fix the problem? Any help wuold be great.

February 26th, 2014, 02:26 PM	#2
greenswoave ninjette.org member Name: USA Location: USA Join Date: Dec 2013 Motorcycle(s): USA Posts: 21	I have LED front flush mount turn signals and stock rear. Replace the relay and you'll be good. The LEDs don't draw enough current to trip the stock relay.

February 26th, 2014, 02:59 PM	#3
law129 ninjette.org newbie Name: Lee Location: Tupelo Join Date: Feb 2014 Motorcycle(s): 2008 ninja 250r Posts: 5	Thanks. What model # is that? at autozone?

February 26th, 2014, 03:02 PM	#4
greenswoave ninjette.org member Name: USA Location: USA Join Date: Dec 2013 Motorcycle(s): USA Posts: 21	Sorry, not sure. I bought mine with my turn signals from http://www.modmy250.com/. The site owner is a forum member here.

February 26th, 2014, 03:15 PM	#5
NevadaWolf Certified looney toon Name: Teri Location: 39°52'40.7"N 118°23'53.8"W (Northern NV) Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot. Blog Entries: 16 MOTM Jul '13, Jul '14	Tri (@CThunder-blue) is the guy at modmy250.com who is helping on the other thread. The relay you want is the Tridon/Novita EP34. Make sure you get that brand as off brand relays, even with the same number, do cause issues with the flasher.

February 26th, 2014, 03:39 PM	#6
law129 ninjette.org newbie Name: Lee Location: Tupelo Join Date: Feb 2014 Motorcycle(s): 2008 ninja 250r Posts: 5	Thanks a lot for the info. Will try this tonight and post tomorrow