|
August 30th, 2011, 07:43 PM
|
#1 |
|
"scandal!"
Name: Adan
Location: Somewhere
Join Date: May 2011 Motorcycle(s): 2011 250R(Crashed 2/26/2014), 09 ER6n Posts: 660
|
Parts help.
Anyone know what type of light goes for the fuel gauge?
The info on the bad bulb I have is KHA110B 12V 1.7 W I looked at 168's and 194's but they're all 3.5W > Also when getting to the fuel gauge light there's rubber padding's fell off. Anyone knows where they go? I couldn't find either on the parts diagram.  Rubber pad thing above |
|
|
|
August 30th, 2011, 07:53 PM
|
#2 |
|
ninjette.org certified postwhore
Name: Brian
Location: Detroit, MI
Join Date: Jun 2010 Motorcycle(s): 2009 Ninja 250R Green Posts: A lot.
|
|
|
|
|
|
August 30th, 2011, 07:54 PM
|
#3 |
|
ninjette.org certified postwhore
Name: Paul
Location: Roanoke, VA
Join Date: Jun 2009 Motorcycle(s): 2008 Candy Plasma Blue 250R Posts: A lot.
|
Well, the rubber boot should be physically surrounding the socket for the bulb.
Regarding the bulb itself, I've replaced mine (as well as the speedo and tach lights) with 194 socket LED bulbs. The 3.5W is the maximum rated power throughput for the bulbs you've found. Your local auto parts store should have replacement filament-type 194 or 168 bulbs on hand that'll work just fine.
__________________________________________________
Proud member of the Blue Army |
|
|
|
|
August 30th, 2011, 08:23 PM
|
#4 |
|
"scandal!"
Name: Adan
Location: Somewhere
Join Date: May 2011 Motorcycle(s): 2011 250R(Crashed 2/26/2014), 09 ER6n Posts: 660
|
Thanks guys.
As for the rubber thing, I believe it came from removing the fairings. |
|
|
|
|
August 30th, 2011, 09:18 PM
|
#5 |
|
ninjette.org certified postwhore
Name: Paul
Location: Roanoke, VA
Join Date: Jun 2009 Motorcycle(s): 2008 Candy Plasma Blue 250R Posts: A lot.
|
Ohhh! It's a sort of flat rubber "U" shape? If so, that does in fact go on the main/lower fairings, just above where the front point of the black leg panels snap into them. I think it's to protect the gas tank. You can find it on the parts fiche online.
__________________________________________________
Proud member of the Blue Army |
|
|
|
 |
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| [roadracingworld.com] - Parts Unlimited To Handle EBR OEM Parts Distribution In North | Ninjette Newsbot | Motorcycling News | 0 | July 16th, 2014 06:00 PM |
| [motorcycle.com] - Parts Unlimited To Be EBR OEM Parts Distributor | Ninjette Newsbot | Motorcycling News | 0 | July 16th, 2014 12:10 PM |
| Advance Auto Parts is Increasing their Motorcycle Parts Selection | dubojr1 | Motorcycle-related | 5 | March 8th, 2012 08:34 AM |
| [topix.net] - The Racing Recipe: Two Parts Bike & Rider, Five Parts Perseverance | Ninjette Newsbot | Motorcycling News | 0 | October 7th, 2010 06:00 PM |
|
|
