What Did You Do to Your Ninjette Today ?? - Page 176

DanteCoal · February 2nd, 2016, 07:33 PM

My Oggy Nobs finally came, so I stripped it down and installed them. Took me about 3 hours (First time removing the fairings, and I chose not to remove the gas tank), but they were overall super easy to install, instructions were clear, and I like how sturdy they look / feel.

Not to mention, my baby is a bit safer now. ^_^

Abu_Mishary · February 3rd, 2016, 10:01 AM

Went to my parents. Got back home. Back aching...................

cuong-nutz · February 3rd, 2016, 08:59 PM

Starter on the truck crapped out yesterday will be back on the moto again.
New battery hasn't came in yet and the coldish weather is making it hard to push start it. Feels weird with my self-made shorty clutch lever and no mirror from the accidents.
I need to order new turn signals and a mirror.
I also need to install this...

It doesn't do any good collecting dust.

Mechanikrazy · February 6th, 2016, 10:07 PM

Today's move:

Installed a power commander.

Total give a mouse a cookie syndrome. I wanted to run full track fairings, but was slightly concerned about heat from the stock cat. Then, I saw a great deal on a full exhaust. so I bought it. Then because I had the full exhaust, I started looking at power commanders on ebay and got a used one at a good price.

I swear this is the last piece of kit for a long, long time.

crazymadbastard · February 6th, 2016, 10:23 PM

Finished up the control mounts on the clip ons, figured the cafe headlight mount, started it after a year of slumber.

sharky nrk · February 8th, 2016, 08:34 AM

Rode for 3 hours this weekend and it was fantastic lol

CaliGrrl · February 8th, 2016, 11:10 AM

Put a few miles on her, and lubed the chain. Back to the canyon we did last week, though a shorter trip. It was windy so I stuck to a place I knew rather than add too many variables all at once. So now I've been introduced to riding in wind - gusty, probably 20-30mph. It's Santa Ana season again, which can be challenging. It's actually still blowing this morning, and did it all night.

walty87 · February 8th, 2016, 12:13 PM

Quote:

Originally Posted by CaliGrrl

Put a few miles on her, and lubed the chain. Back to the canyon we did last week, though a shorter trip. It was windy so I stuck to a place I knew rather than add too many variables all at once. So now I've been introduced to riding in wind - gusty, probably 20-30mph. It's Santa Ana season again, which can be challenging. It's actually still blowing this morning, and did it all night.

I hate riding when it's super windy!

Unless the wind is behind pushing me! Always try and get a new top speed record!

BDfromBC · February 8th, 2016, 01:04 PM

Today I got some back to black, and hit the side plastic/main seat/passenger seat with it. Little chilly today, debating rather to go outside and hit around the cluster with it aswell. Shiny Shiny

CaliGrrl · February 8th, 2016, 02:50 PM

You know, it wasn't actually that bad. A little gusty now and then, and some variability depending on whether something blocked the wind or not, but it's good for me to get some experience gauging things.

crazymadbastard · February 8th, 2016, 07:07 PM

set it to the side once more...

psych0hans · February 8th, 2016, 09:37 PM

Quote:

Originally Posted by inapexveritas

I swear this is the last piece of kit for a long, long time.

that's the same thing I say, right before I go ahead and buy something else for the bike... It's an addiction I tell you!!!

RacinNinja · February 8th, 2016, 10:13 PM

New rear sprocket, new chain, new front sprocket, new grips and a wheel spacer! Thanks @DCMoney!

Old sprocket..

Shiny new!

Clean hub

jonuhhthinn · February 8th, 2016, 10:52 PM

got the bike stripped down for a thorough cleaning

jonuhhthinn · February 8th, 2016, 10:53 PM

ill be getting new sharkskinz in this week so I'm looking forward to breaking out my old paint guns

mgentz · February 9th, 2016, 04:57 AM

Quote:

Originally Posted by inapexveritas

I swear this is the last piece of kit for a long, long time.

Yep. I've said that before.

BDfromBC · February 12th, 2016, 07:44 PM

Black double bubble came in the mail today, picked it up, and installed

UFOmoplata · February 13th, 2016, 05:53 PM

Not much. Mounted tires and fit the 17.

https://instagram.com/p/BBvwZRhl1FA/

cbinker · February 14th, 2016, 01:42 PM

removed the key tumbler from the triple and connected the wiring to the on off switch. ordered keyless gas cap

cadymae · February 16th, 2016, 11:19 AM

I put in a new battery and added a Battery Tender. I now have a pigtail
sticking out from under my seat.

cbinker · February 16th, 2016, 11:40 AM

Quote:

Originally Posted by cuong-nutz

It doesn't do any good collecting dust.

i am interested in one of those contraptions, where did you get and how much.

DanteCoal · February 16th, 2016, 07:33 PM

Stripped it down to the frame after work. Getting ready to install SS brake lines, flush the coolant (switching to Engine Ice), and swap some of the bolts to decorative bolts.

cuong-nutz · February 18th, 2016, 07:14 PM

Quote:

Originally Posted by cbinker

i am interested in one of those contraptions, where did you get and how much.

It's on the pricey side. You're looking at $350 + shipping. I got mine largely discounted during the holiday. www.impaktechusa.com

Xtreembikeeworks.com builds one slightly cheaper.

cbinker · February 19th, 2016, 08:05 AM

bummer, looking for something cheap to do some extreme leaning parking lot practice.

cbinker · February 19th, 2016, 11:50 AM

Ive gone Keyless!

allanoue · February 19th, 2016, 12:23 PM

Quote:

Originally Posted by cbinker

Ive gone Keyless!

]

I wish I could trust myself enough to turn off the motor when filling

Link to original page on YouTube.

cbinker · February 19th, 2016, 12:33 PM

Quote:

Originally Posted by allanoue

I wish I could trust myself enough to turn off the motor when filling

Link to original page on YouTube.

the motor is off when parked in the pit area, until its time to hit the track.

allanoue · February 20th, 2016, 03:20 PM

I took it for a ride, as did all bikers on the east coast that has not winterized there bike.

VaFish · February 20th, 2016, 07:31 PM

It was 65 and sunny so we went for a ride, then I shortened the kickstand on my daughter's ninjette.

RacinNinja · February 20th, 2016, 07:40 PM

I started it, warmed it up and listened to the sweet sound of that full Tyga exhaust and wondered if racing season was here yet!

toEleven · February 20th, 2016, 08:15 PM

Took a trip around the block to find out if the winter installations were functional, and remembered why my street bike does not have a loud after-market exhaust. Also ordered new tires Friday, which will apparently arrive on Monday (shipped free!). Revzilla ftw I guess.

Quote:

Originally Posted by allanoue

I took it for a ride, as did all bikers on the east coast that has not winterized there bike.

lol, it definitely seemed like all of us were out there.

VaFish · February 21st, 2016, 09:54 AM

There were a lot out yesterday, don't think I will see too many today on my ride.

Mohawk · February 22nd, 2016, 10:02 AM

Fired up yesterday my ZZR250 after winter upgrades.

1. Fitted CoP's
2. Fitted KR1-S swingarm, with home made dogbones & the 250R Ohlins shock I already had

3. Fitted VTR250 rear wheel (5 spoke 17" to match KR1-S front wheel)
4. Rebuilt the already fitted KR1-S forks with combination of VTR1000 cartridges & VFR800 internal valves, with VTR1000 upper fork legs & VFR800 springs. Gives me cartridge forks with preload & rebound adjustment

5. Fitted oil cooler, still some work here, has a small leak

6. Fitted tri-colour LED battery/charge condition monitor.
7. Relocated coolant expansion bottle
8. Fitted LiFe lightweight battery

I'll move the battery to left side of engine later so I can rip out & replace the airbox with a much bigger replacement one ! Will do when I do the 282cc BIG bore.

DEFY · February 22nd, 2016, 10:28 AM

Quote:

Originally Posted by allanoue

I took it for a ride, as did all bikers on the east coast that has not winterized there bike.

I winterized mine, wished I had it. Grabbing it up this weekend, at least I got to wash the truck.

Morten273 · February 22nd, 2016, 12:00 PM

What did i do for my Ninja today?
I Joined Ninjette

Mounted my new custommade shorty exhaust (made from an original)
Mounted Philips Extreme vision 130+ light bulbs (extremely bright for an halogen bulb)
adjusted the clutch cable, so now pulling in the clutch lever, fits my hand perfectly.
put on a CTEK charger, so the battery has full power when the season starts in marts

Whats up next?
Hmm looking at getting GP style shift

csmith12 · February 28th, 2016, 06:22 PM

Removed plastics
Started cleaning every inch of the bike
Started checking every bolt for torque spec/tightness
Lubed cables
Finally cleaned the white wheels that were starting to turn gray from grime

Today was a fun day!

VaFish · February 28th, 2016, 07:54 PM

It was 65 and sunny. After changing oil on my truck and wifes car the daughter and I dragged the bikes out and went for a ride.

DEFY · February 29th, 2016, 05:31 AM

seen a lot out yesterday, packed the bike up and brought it back to NY. Unfortunately, most of the street bikes I saw were driven by idiots, one passed me using the center turn lane, no pass zone. Already starting the season off wrong.

sharky nrk · February 29th, 2016, 07:47 AM

Went for a nice little ride yesterday on the Ninjette, worked a bit on the XR in the evening. Life has been really busy so turning wrenches for an hour or so was nice break.

tgold · February 29th, 2016, 08:42 AM

Finished the reassembly of my forks with cartridge emulators installed. Custom mixed 15w oil using Redline Medium and heavy fork oils.

Ordered a good 520 non-o ring chain after going through way too much hassle trying to put together a 428 chain setup.

February 3rd, 2016, 08:59 PM	#7003
cuong-nutz RIP Alex Name: Cuong Location: Houston, TX Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot. Blog Entries: 2	Starter on the truck crapped out yesterday will be back on the moto again. New battery hasn't came in yet and the coldish weather is making it hard to push start it. Feels weird with my self-made shorty clutch lever and no mirror from the accidents. I need to order new turn signals and a mirror. I also need to install this... It doesn't do any good collecting dust. __________________________________________________ HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days

February 6th, 2016, 10:23 PM	#7005
crazymadbastard I'm crazy,your excuse is? Name: Winston Location: Connecticut Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.	Finished up the control mounts on the clip ons, figured the cafe headlight mount, started it after a year of slumber. __________________________________________________ My Cafe Racer Build My intro post

February 8th, 2016, 08:34 AM	#7006
sharky nrk Fighting Texas Aggie '05 Name: Neil Location: Hutto, TX Join Date: Feb 2009 Motorcycle(s): '07 ZX6R, '08 Versys, '09 250R Track, '93 F2/F3 Track Posts: A lot.	Rode for 3 hours this weekend and it was fantastic lol __________________________________________________ Keep it rubber side down and enjoy the ride Get healthy - Get Fit - Change Your Life Click Here Or PM Me To Find More - Advocare

February 8th, 2016, 07:07 PM	#7011
crazymadbastard I'm crazy,your excuse is? Name: Winston Location: Connecticut Join Date: May 2013 Motorcycle(s): 250 2007 ninja Posts: A lot.	set it to the side once more... __________________________________________________ My Cafe Racer Build My intro post

February 8th, 2016, 10:13 PM	#7013
RacinNinja Vintage Screwball Name: B Location: Washington Join Date: Feb 2016 Motorcycle(s): 2011 Ninja 250, 2008 Ninja 250, 2019 KTM 1290SDR, 2017 FZ10 Posts: A lot. MOTM - Mar '16	New rear sprocket, new chain, new front sprocket, new grips and a wheel spacer! Thanks @DCMoney! Old sprocket.. Shiny new! Clean hub __________________________________________________ Goin' fast on slow bikes!

February 2nd, 2016, 07:33 PM	#7001
DanteCoal ninjette.org member Name: Dante Location: Salem, OR Join Date: Aug 2014 Motorcycle(s): 2016 Ninja 300 ABS, R.I.P 1986 Ninja EX250 Posts: 93	My Oggy Nobs finally came, so I stripped it down and installed them. Took me about 3 hours (First time removing the fairings, and I chose not to remove the gas tank), but they were overall super easy to install, instructions were clear, and I like how sturdy they look / feel. Not to mention, my baby is a bit safer now. ^_^

February 3rd, 2016, 10:01 AM	#7002
Abu_Mishary The Asian Caucasian Name: Abu Mishary Mohd Fairus Location: Malaysia Join Date: Jan 2016 Motorcycle(s): Kawasaki Ninja 250 SE 2015 (sold); Honda ADV160 (current) Posts: 796 MOTM - Jan '17	Went to my parents. Got back home. Back aching...................

February 6th, 2016, 10:07 PM	#7004
Mechanikrazy ninjette.org guru Name: Al Location: Orange County, CA Join Date: Dec 2015 Motorcycle(s): Thruxton R, R6 450 triple, EX300 (sold) Posts: 263	Today's move: Installed a power commander. Total give a mouse a cookie syndrome. I wanted to run full track fairings, but was slightly concerned about heat from the stock cat. Then, I saw a great deal on a full exhaust. so I bought it. Then because I had the full exhaust, I started looking at power commanders on ebay and got a used one at a good price. I swear this is the last piece of kit for a long, long time.

February 8th, 2016, 11:10 AM	#7007
CaliGrrl ninjette.org certified postwhore Name: Kerry Location: Ventura, CA Join Date: Jan 2016 Motorcycle(s): Ninja650 Posts: A lot. MOTM - Apr '18, Apr '17, Apr '16	Put a few miles on her, and lubed the chain. Back to the canyon we did last week, though a shorter trip. It was windy so I stuck to a place I knew rather than add too many variables all at once. So now I've been introduced to riding in wind - gusty, probably 20-30mph. It's Santa Ana season again, which can be challenging. It's actually still blowing this morning, and did it all night.

February 8th, 2016, 01:04 PM	#7009
BDfromBC ninjette.org member Name: Brandon Location: Okanagan Join Date: Jul 2015 Motorcycle(s): EX250-J Posts: 70	Today I got some back to black, and hit the side plastic/main seat/passenger seat with it. Little chilly today, debating rather to go outside and hit around the cluster with it aswell. Shiny Shiny

February 8th, 2016, 02:50 PM	#7010
CaliGrrl ninjette.org certified postwhore Name: Kerry Location: Ventura, CA Join Date: Jan 2016 Motorcycle(s): Ninja650 Posts: A lot. MOTM - Apr '18, Apr '17, Apr '16	You know, it wasn't actually that bad. A little gusty now and then, and some variability depending on whether something blocked the wind or not, but it's good for me to get some experience gauging things.

February 8th, 2016, 10:52 PM	#7014
jonuhhthinn ninjette.org member Name: Jon Location: Southern California Join Date: Dec 2014 Motorcycle(s): 77' yamaha xs650 / 01' R6 / 08' ninja 250 Posts: 31	got the bike stripped down for a thorough cleaning

February 8th, 2016, 10:53 PM	#7015
jonuhhthinn ninjette.org member Name: Jon Location: Southern California Join Date: Dec 2014 Motorcycle(s): 77' yamaha xs650 / 01' R6 / 08' ninja 250 Posts: 31	ill be getting new sharkskinz in this week so I'm looking forward to breaking out my old paint guns

February 12th, 2016, 07:44 PM	#7017
BDfromBC ninjette.org member Name: Brandon Location: Okanagan Join Date: Jul 2015 Motorcycle(s): EX250-J Posts: 70	Black double bubble came in the mail today, picked it up, and installed

February 13th, 2016, 05:53 PM	#7018
UFOmoplata ninjette.org member Name: Shoulder Blade Location: WV Join Date: Dec 2015 Motorcycle(s): 2007 Hoodrat 250 Posts: 242	Not much. Mounted tires and fit the 17. https://instagram.com/p/BBvwZRhl1FA/ __________________________________________________ "Brah, you can't be looking like that on a 250, brah. You gotta mod a 250, brah. It's like the hachi-roku of bikes."

February 14th, 2016, 01:42 PM	#7019
cbinker Track Clown Name: Chris Location: Kingman, AZ Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot. MOTM - Sep '15	removed the key tumbler from the triple and connected the wiring to the on off switch. ordered keyless gas cap __________________________________________________ TEAM ALFALFA www.apexassassins.com

February 16th, 2016, 11:19 AM	#7020
cadymae Cadymae Name: Caryn Location: Gulfport, FL Join Date: Jul 2015 Motorcycle(s): 2011 Ninja 250R Posts: 31	I put in a new battery and added a Battery Tender. I now have a pigtail sticking out from under my seat.

February 16th, 2016, 07:33 PM	#7022
DanteCoal ninjette.org member Name: Dante Location: Salem, OR Join Date: Aug 2014 Motorcycle(s): 2016 Ninja 300 ABS, R.I.P 1986 Ninja EX250 Posts: 93	Stripped it down to the frame after work. Getting ready to install SS brake lines, flush the coolant (switching to Engine Ice), and swap some of the bolts to decorative bolts.

February 19th, 2016, 08:05 AM	#7024
cbinker Track Clown Name: Chris Location: Kingman, AZ Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot. MOTM - Sep '15	bummer, looking for something cheap to do some extreme leaning parking lot practice. __________________________________________________ TEAM ALFALFA www.apexassassins.com

February 19th, 2016, 11:50 AM	#7025
cbinker Track Clown Name: Chris Location: Kingman, AZ Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot. MOTM - Sep '15	Ive gone Keyless! __________________________________________________ TEAM ALFALFA www.apexassassins.com

February 20th, 2016, 03:20 PM	#7028
allanoue ninjette.org certified postwhore Name: Al Location: York, Pa Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much. MOTM - Sep '14	I took it for a ride, as did all bikers on the east coast that has not winterized there bike. __________________________________________________ Keep calm and ride on -Motofool Never quit on a rainy day -ally99

February 20th, 2016, 07:31 PM	#7029
VaFish ninjette.org certified postwhore Name: Tom Location: Northern Virginia Join Date: Jul 2015 Motorcycle(s): 2001 Ninja 250, 2019 Harley Ultra Classic, 2001 Suzuki SV650 Posts: A lot. MOTM - Jan '16	It was 65 and sunny so we went for a ride, then I shortened the kickstand on my daughter's ninjette.

February 20th, 2016, 07:40 PM	#7030
RacinNinja Vintage Screwball Name: B Location: Washington Join Date: Feb 2016 Motorcycle(s): 2011 Ninja 250, 2008 Ninja 250, 2019 KTM 1290SDR, 2017 FZ10 Posts: A lot. MOTM - Mar '16	I started it, warmed it up and listened to the sweet sound of that full Tyga exhaust and wondered if racing season was here yet! __________________________________________________ Goin' fast on slow bikes!

February 21st, 2016, 09:54 AM	#7032
VaFish ninjette.org certified postwhore Name: Tom Location: Northern Virginia Join Date: Jul 2015 Motorcycle(s): 2001 Ninja 250, 2019 Harley Ultra Classic, 2001 Suzuki SV650 Posts: A lot. MOTM - Jan '16	There were a lot out yesterday, don't think I will see too many today on my ride.

February 22nd, 2016, 10:02 AM	#7033
Mohawk ninjette.org guru Name: Chris Location: Bristol, UK Join Date: Feb 2016 Motorcycle(s): ZZR250, VFR800 Posts: 478	Fired up yesterday my ZZR250 after winter upgrades. 1. Fitted CoP's 2. Fitted KR1-S swingarm, with home made dogbones & the 250R Ohlins shock I already had 3. Fitted VTR250 rear wheel (5 spoke 17" to match KR1-S front wheel) 4. Rebuilt the already fitted KR1-S forks with combination of VTR1000 cartridges & VFR800 internal valves, with VTR1000 upper fork legs & VFR800 springs. Gives me cartridge forks with preload & rebound adjustment 5. Fitted oil cooler, still some work here, has a small leak 6. Fitted tri-colour LED battery/charge condition monitor. 7. Relocated coolant expansion bottle 8. Fitted LiFe lightweight battery I'll move the battery to left side of engine later so I can rip out & replace the airbox with a much bigger replacement one ! Will do when I do the 282cc BIG bore.

February 22nd, 2016, 12:00 PM	#7035
Morten273 ninjette.org newbie Name: Morten Location: Denmark Join Date: Feb 2016 Motorcycle(s): Kawasaki Ninja 250R Posts: 2	What did i do for my Ninja today? I Joined Ninjette Mounted my new custommade shorty exhaust (made from an original) Mounted Philips Extreme vision 130+ light bulbs (extremely bright for an halogen bulb) adjusted the clutch cable, so now pulling in the clutch lever, fits my hand perfectly. put on a CTEK charger, so the battery has full power when the season starts in marts Whats up next? Hmm looking at getting GP style shift

February 28th, 2016, 06:22 PM	#7036
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Removed plastics Started cleaning every inch of the bike Started checking every bolt for torque spec/tightness Lubed cables Finally cleaned the white wheels that were starting to turn gray from grime Today was a fun day! __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

February 28th, 2016, 07:54 PM	#7037
VaFish ninjette.org certified postwhore Name: Tom Location: Northern Virginia Join Date: Jul 2015 Motorcycle(s): 2001 Ninja 250, 2019 Harley Ultra Classic, 2001 Suzuki SV650 Posts: A lot. MOTM - Jan '16	It was 65 and sunny. After changing oil on my truck and wifes car the daughter and I dragged the bikes out and went for a ride.

February 29th, 2016, 05:31 AM	#7038
DEFY ᗧ•••ᗣ•ᗣᗣ•••ᗣ Name: Nick Location: NY Join Date: Nov 2013 Motorcycle(s): 2009 Ninja 250R and 2014 Triumph 675R Posts: A lot.	seen a lot out yesterday, packed the bike up and brought it back to NY. Unfortunately, most of the street bikes I saw were driven by idiots, one passed me using the center turn lane, no pass zone. Already starting the season off wrong. __________________________________________________ Spoiler for topic: It might just be the [you] tag

February 29th, 2016, 07:47 AM	#7039
sharky nrk Fighting Texas Aggie '05 Name: Neil Location: Hutto, TX Join Date: Feb 2009 Motorcycle(s): '07 ZX6R, '08 Versys, '09 250R Track, '93 F2/F3 Track Posts: A lot.	Went for a nice little ride yesterday on the Ninjette, worked a bit on the XR in the evening. Life has been really busy so turning wrenches for an hour or so was nice break. __________________________________________________ Keep it rubber side down and enjoy the ride Get healthy - Get Fit - Change Your Life Click Here Or PM Me To Find More - Advocare

February 29th, 2016, 08:42 AM	#7040
tgold ninjette.org sage Name: Timm Location: West Seneca, NY Join Date: Oct 2015 Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike Posts: 556 MOTM - Nov '15	Finished the reassembly of my forks with cartridge emulators installed. Custom mixed 15w oil using Redline Medium and heavy fork oils. Ordered a good 520 non-o ring chain after going through way too much hassle trying to put together a 428 chain setup.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Discovered something scary about my Ninjette today...	kjohng	General Motorcycling Discussion	28	October 15th, 2021 01:40 PM
Sold the 2006 Ninjette today :(	Renner	General Motorcycling Discussion	31	October 16th, 2014 11:46 PM
Today I Gave My Ninjette Wings!	BlueHairSar	Pictures	5	June 20th, 2013 07:38 AM
my bro went down today on his ninjette	richierich781	!%@*#$%!)@#&!%@ I crashed!	46	January 18th, 2013 11:59 AM
Ninjette. org hacked today	CC Cowboy	Off-Topic	9	April 3rd, 2011 08:55 AM