Hey

[636]

Here is the ninja 250 I built for my girlfriend

Yoshimura Fender Elim
Sho-gun frame sliders
Yoshimura Full Exhaust
Dynojet Stage 2 jet kit,
Weisco 13:1 pistons
CRG roller clutch and break levels short
Streched 5"
130t gold chain

Theres a bunch more stuff but I really don't remember, hope you guys like how it looks

[636]

also re geared, I think stock was 14-45 if I remember right now its a 15-42 (don't quote me, as I said I don't really remember off the top of my head)

[Jiggles]

Dang you built that!?

[636]

less glare

[636]

Yeah, me and her sat down and did all the wrench time, we got bored, and she loves the look of some of streched bikes and really wanted it. Surprisingly it actually handles a LOT better then it did stock. Its much more stable in wind and doesn't get pushed around the road so much with passing traffic. It turns almost identical to when it was stock too, I'm pretty impressed with it. She did the break cable modification for it to work, and bled the brakes, basically just turned the fitting 180* and get an extra few inches from the stock line. Saved us a few dollars over newer brake lines. But the strech mod was only like 350 bucks total, the extensions were like 230.00 and the new chain was like 140

[JohnnyBravo]

Who stretched it??? I like it!!! Def lookin good!!! Hi

[ForceofWill]

Originally Posted by 636

Yeah, me and her sat down and did all the wrench time, we got bored, and she loves the look of some of streched bikes and really wanted it. Surprisingly it actually handles a LOT better then it did stock. Its much more stable in wind and doesn't get pushed around the road so much with passing traffic. It turns almost identical to when it was stock too, I'm pretty impressed with it. She did the break cable modification for it to work, and bled the brakes, basically just turned the fitting 180* and get an extra few inches from the stock line. Saved us a few dollars over newer brake lines. But the strech mod was only like 350 bucks total, the extensions were like 230.00 and the new chain was like 140

Stretched 5"

[636]

I did the strech/exhaust/regear/pistons

she did the fender elim/levers/frame sliders/rear brake mod and the chain

and we had it Jetted on a dyno from our local bike shop

[JohnnyBravo]

Bolt on extension???

[636]

yes, I ordered it offline. Fantastic part, made very well. I'd give you guys the website I got it from if I could remember it.

[Aggrotech]

Originally Posted by 636

yes, I ordered it offline. Fantastic part, made very well. I'd give you guys the website I got it from if I could remember it.

people round dez' parts dont take kindly to extended swingarms!

[636]

Yeah if anyone has any questions about it, I don't mind answering. I just have a terrible memory where I sourced most of these parts since it was usually like 1 time orders online.

[636]

Originally Posted by Aggrotech

people round dez' parts dont take kindly to extended swingarms!

I'm glad you like it Aggrotech.

[alex.s]

hey bro i don't think thats a 636... i'm pretty sure thats just a ninja with a stretched swinger. i think you got ripped off! :P

[636]

hahaha, I own a 2013 636, this 250, and a Yamaha 950.

photo shoot with my 636




But this site not about those bikes! hahaha So I digress

[JohnnyBravo]

I love stretched bikes... But folks around here do like their stock suspensions an swing arms :/

Still it's a sweet bike

[636]

Thanks man,

I've never been a fan of stock anything and its something my girl was looking at when we talked about modifying her bike, she started looking at pictures of bikes online, and just kept the conversation going back to the longer looking back end and extended swing arms and lowering it for her. Originally I was going to fabricate something for it because I couldn't find anyone who made anything, then I found these online.

As I said though, it handles better than it did stock. No knock in the wind and getting blown around on the highway, and it turns on a dime just like it did before.

Anyone that naysays it well...Cool for you. Don't knock it because you can't afford/don't want to try it. And lets be honest, my girl is a new rider and chances are she's not going to be dragging knee, racing track anytime soon on it, so I doubt she'll need that .01 on her time to win. So overall, if you hate it...to you I say... and go work on your own bike cool cat. Other than that, thanks for the peeks and the thumbs up.

[JohnnyBravo]

By the time my 300 is fully modded it very well may be stretched first is the fender delete though

[636]

yeah they are pretty nice, almost wish her and I waited a year to buy it, but we bought the 2012 right when it came out so we had no idea a 300 was in talks. Probably would of done all this to the 300 if it was the model available when we purchased it for her

Best of luck in your modding ventures man.

[JohnnyBravo]

Originally Posted by 636

Best of luck in your modding ventures man.

Thanks! Have fun out there, an welcome to the site

[636]

Appreciate it, but I've been here for a while poking around never really messaging until now, felt like I wanted the bike finished first before I spoke haha

[csmith12]

So you taking something for your memory thing? bwahahhahahaha Also, you waited to long to speak up, you cheated us out of a build thread.

jk yo! Cool stuff Daveo. As long as your girl rides/likes it, that is all that matters.

[636]

Originally Posted by csmith12

So you taking something for your memory thing? bwahahhahahaha Also, you waited to long to speak up, you cheated us out of a build thread.

jk yo! Cool stuff Daveo. As long as your girl rides/likes it, that is all that matters.

haha, I need to start taking stuff for my memory, I feel like an old man and I'm only 26, never did drugs in my life, but the army messed me up pretty good haha, too many explosions in Afghanistan, I even have a hard time with balance...but I think that has more to do with my drinking

Yup, and as all of us with girls know...its now about what we like. I'm trading in my 950 for a Harley switchback and to do so I had to find a bike she liked to sit on first hahahaha

P.S. -

I still have all the photos for a build thread.

Ridings my life, I'm part of the Green Knights MMC here in Alaska. All my spare time goes into my bikes

[csmith12]

Well thanks for your service man. I have a similar thing going with my old lady. She wants me to get another HD but I want her to get a bike of her own. Step one of my plan is complete, she has her learners permit.

[636]

haha thanks man, yeah I'm pretty pumped to get my Harley, ever since I got a cruiser, I'm completely sold, I barely get on my sport bike now ha

[csmith12]

Originally Posted by 636

I'm completely sold, I barely get on my sport bike now ha

Let's not go too far now...

[Sirref]

I think that is the first stretched 250 I've ever seen/heard of. I'm shocked that you feel that it improves the handling as I would imagine it having the opposite effect.

nice pic csmith, switch sport bikes with motorcycles and you've got it dead on though I don't see myself ever riding a cruiser.

[636]

Originally Posted by csmith12

Let's not go too far now...

bahaha this made me lol hard

[636]

Originally Posted by Sirref

I think that is the first stretched 250 I've ever seen/heard of. I'm shocked that you feel that it improves the handling as I would imagine it having the opposite effect.

nice pic csmith, switch sport bikes with motorcycles and you've got it dead on though I don't see myself ever riding a cruiser.

Honestly, I have only ever found 2 others streched in all my searching. One dude on youtube and one dude on the kawi forums.

and honest to god man, we all know the 250 can be dicey in wind on the highway, but this thing is now a rock, it doesn't get blown around and it handles the same in a turn. I wouldn't go back now that its like this

[Snake]

Hello and welcome.

[KJohnson21]

[636]

https://www.youtube.com/watch?v=7gMgx72RL8c

Little riding video I made here in Alaska

[Motofool]

Originally Posted by 636

Little riding video I made here in Alaska

Welcome to our site, Daveo !!!