May 20th, 2011, 02:16 PM | #1 |
ninjette.org newbie
Name: ryan
Location: bournemouth
Join Date: May 2011 Motorcycle(s): ninja 250 Posts: 7
|
NINJA 250R led trouble!!
i have an 09 ninja 250r and have LED indicators on the front and have installed an all in one LED break/indicator light on the rear. i have conected it all up as everyone else with the new relay BUT when i indicate left or right the orange LEDs light up and flash but at the same time the oposite red LEDs go out(so only orange LEDs are on and no red lights).
PLEASE HELP the flash rate is ok just the red lights on the oposite side of indication also turn off?? |
|
May 20th, 2011, 02:30 PM | #2 |
ninjette.org member
Name: Roni
Location: oak grove,ky
Join Date: May 2011 Motorcycle(s): 2008 ninja 250r Posts: 18
|
same
i was haveing a similar problem when i turned either the left or right say tje left the right would also blink i been surfing the web and ask the same questin here and i found out u need to do a diode mod here is the link from the web site http://www.ninjette.org/forums/showt...ighlight=diode or u can do what i did went to the local shop and order the part
|
|
May 20th, 2011, 02:34 PM | #3 |
ninjette.org member
Name: Roni
Location: oak grove,ky
Join Date: May 2011 Motorcycle(s): 2008 ninja 250r Posts: 18
|
or
if the link dosent work u can go to search type in TURN SIGNAL PROBLEMS its either the 2nd or 3re one down and the post is called "Wiring a DIODE for 4 L.E.D turn signals".
|
|
May 20th, 2011, 03:05 PM | #4 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|