ninjette.org

Go Back   ninjette.org > Marketplace > Motorcycle-related

Reply
 
Thread Tools
Old May 18th, 2011, 09:17 PM   #1
CThunder-blue
ModMy250.com
 
CThunder-blue's Avatar
 
Name: Tri
Location: St, Louis
Join Date: Sep 2010

Motorcycle(s): 2009 Ninja 250R, 2005 R6

Posts: A lot.
Hazard lights kit- Gauging interest

Hey guys, I wanted to see if there's interest for me to put together a kit that would allow you to have hazard lights on your new gen. It would likely work with the 07 and down, but I'd have to see a schematic to be sure. Anyways, I've already tested out my idea and it works. I just used existing parts I had and rigged something up to test it real quick. I don't have any of the actual parts, except for the relay so I can't post any pictures of a finished design.

Here's what the kit would include:

Handle bar mounted switch (I've attached a stock photo)
Tridon EP35 electronic relay
Fuse holder w/10 amp fuse
2x wire taps

The cost would be $50 shipped/ International would be extra. The kit would come prewired and I would suspect it would take maybe 20-30 minutes to install, not including the time it takes to remove the left side and rear fairings, and both seats. I'm using wire taps in this and not wire harnesses to keep the costs down. A new set of harnesses would add $10 to the kit.
Attached Images
File Type: jpg 12-0201-500.jpg (162.8 KB, 6 views)
__________________________________________________
The www.ModMy250.com guy

Last futzed with by CThunder-blue; May 18th, 2011 at 09:29 PM. Reason: Lowered the cost to $50
CThunder-blue is offline   Reply With Quote




Old June 24th, 2011, 04:33 PM   #2
matha028
ninjette.org guru
 
Name: Adam
Location: Orlando FL
Join Date: Jun 2011

Motorcycle(s): 2010 Kawasaki Ninja 250R red/black SE <-- totalled now '11 650r BLACK

Posts: 334
That would be a nice feature to have. Would it work with LED signals? Like Protons and signal integrated brake lights?
__________________________________________________
Proud to stand by the fact that I saved my life by laying my bike down and sliding away from it, to avoid a T-Bone collision with a red light runner.
matha028 is offline   Reply With Quote


Old June 24th, 2011, 08:43 PM   #3
CThunder-blue
ModMy250.com
 
CThunder-blue's Avatar
 
Name: Tri
Location: St, Louis
Join Date: Sep 2010

Motorcycle(s): 2009 Ninja 250R, 2005 R6

Posts: A lot.
Yeah, they would work with any of the signals.
__________________________________________________
The www.ModMy250.com guy
CThunder-blue is offline   Reply With Quote


Old June 24th, 2011, 08:49 PM   #4
Vampyre
ninjette.org sage
 
Vampyre's Avatar
 
Name: Joseph
Location: Winter Park, FL
Join Date: May 2011

Motorcycle(s): 2011 250R Black, 2005 ZX-6R Blue

Posts: 623
I think I might be interested. Do you have any of those 250r stickers in Grey and Red?
Vampyre is offline   Reply With Quote


Old June 24th, 2011, 10:38 PM   #5
CThunder-blue
ModMy250.com
 
CThunder-blue's Avatar
 
Name: Tri
Location: St, Louis
Join Date: Sep 2010

Motorcycle(s): 2009 Ninja 250R, 2005 R6

Posts: A lot.
I have them in Silver and Red
__________________________________________________
The www.ModMy250.com guy
CThunder-blue is offline   Reply With Quote


Old June 27th, 2011, 07:47 AM   #6
CThunder-blue
ModMy250.com
 
CThunder-blue's Avatar
 
Name: Tri
Location: St, Louis
Join Date: Sep 2010

Motorcycle(s): 2009 Ninja 250R, 2005 R6

Posts: A lot.
I think I just figured out a way to get hazard lights to work without the need for the relay. I'm going to order parts today and see if my idea works out. If it does, I'll post a DIY and not sell a kit since my idea is really simple.
__________________________________________________
The www.ModMy250.com guy
CThunder-blue is offline   Reply With Quote


Old June 27th, 2011, 08:14 AM   #7
Vampyre
ninjette.org sage
 
Vampyre's Avatar
 
Name: Joseph
Location: Winter Park, FL
Join Date: May 2011

Motorcycle(s): 2011 250R Black, 2005 ZX-6R Blue

Posts: 623
Quote:
Originally Posted by CThunder-blue View Post
I have them in Silver and Red

How much of the green stuff would I have to send you to procure said silver and red decal?
Vampyre is offline   Reply With Quote


Old June 27th, 2011, 04:29 PM   #8
LazinCajun
ninjette.org guru
 
LazinCajun's Avatar
 
Name: Anon
Location: Atlanta, GA
Join Date: Aug 2009

Motorcycle(s): 2008 Ninja 250 (Blue!)

Posts: 488
What would installation entail? (interested!)
LazinCajun is offline   Reply With Quote


Old July 2nd, 2011, 08:34 PM   #9
CThunder-blue
ModMy250.com
 
CThunder-blue's Avatar
 
Name: Tri
Location: St, Louis
Join Date: Sep 2010

Motorcycle(s): 2009 Ninja 250R, 2005 R6

Posts: A lot.
Here's the DIY I promised

http://www.ninjette.org/forums/showthread.php?t=78201

DIY and it should only cost you around $23
__________________________________________________
The www.ModMy250.com guy
CThunder-blue is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Gauging interest for a MD to PA weekend ride, next summer. subxero Group Rides and Local Events 128 June 8th, 2013 03:29 PM
gauging interest in the tristate or who ever fizzer914 Group Rides and Local Events 2 June 24th, 2012 12:35 PM
Gauging Interest: Gear Indicators (one with shift light, one without shiftlight) SlowBoyRacing Motorcycle-related 13 March 2nd, 2012 11:27 PM
Gauging interest in another Exhaust GB ztrack157 Motorcycle-related 39 February 27th, 2012 12:15 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 07:24 AM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.