January 27th, 2016, 08:30 PM | #1 |
ninjette.org member
Name: Sharkey
Location: Sf bay area
Join Date: Sep 2015 Motorcycle(s): 2010 ninja 250 Posts: 127
|
Pre gen rear sets install?
Ok so I got some pre gen rear sets. And the clutch side installed with not issues. But I'm having problems with the brake side. It seems the master cylinder will not line up as if I should be using the pre gen one. I hope that not the case but then if it is I do have one laying around...any help would be great
__________________________________________________
Never rode a motorcycle but own 2 |
|
January 27th, 2016, 09:14 PM | #2 |
ninjette.org member
Name: Sharkey
Location: Sf bay area
Join Date: Sep 2015 Motorcycle(s): 2010 ninja 250 Posts: 127
|
Pic
__________________________________________________
Never rode a motorcycle but own 2 |
|
January 29th, 2016, 12:25 PM | #3 |
ninjette.org newbie
Name: Tony
Location: Berkshire. UK.
Join Date: Oct 2015 Motorcycle(s): EX250KAF 2010 Posts: 3
|
Re.pre gen rear sets
If it's any help,when I fitted some chinese rear sets I had same problem but found by reversing the master cylinder from its original position everything lined up great.Also fitted hydraulic stop light sw.which simplified the instalation. I'm still looking for a suitable pedal return spring though! Good luck
|
|
January 29th, 2016, 12:32 PM | #4 |
ninjette.org member
Name: Ricky
Location: Modesto,CA
Join Date: Aug 2015 Motorcycle(s): 2000 EX250 Posts: 31
|
you might be able to make it fit by adjust the threaded pushrod between the pedal and the master
|
|
February 1st, 2016, 06:52 PM | #5 |
ninjette.org member
Name: Sharkey
Location: Sf bay area
Join Date: Sep 2015 Motorcycle(s): 2010 ninja 250 Posts: 127
|
Yeah I tried that. No luck. I really just want the right sets now
__________________________________________________
Never rode a motorcycle but own 2 |
|
February 9th, 2016, 05:46 AM | #6 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
/moved to pre-gen tech
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
February 9th, 2016, 08:39 AM | #7 |
????????????????
Name: T
Location: no where
Join Date: Feb 2016 Motorcycle(s): 2007 ninja 250, 14 ninja 300, 09 1125CR Posts: A lot.
MOTM - May '17
|
from the pic you put up of the brake master if you would rotate it so the bolt hole threads are on the other side it might work better. here is a pic for reference. https://www.ninjette.org/forums/atta...1&d=1455032298
|
|
February 9th, 2016, 09:12 PM | #8 | |
ninjette.org member
Name: Sharkey
Location: Sf bay area
Join Date: Sep 2015 Motorcycle(s): 2010 ninja 250 Posts: 127
|
Quote:
__________________________________________________
Never rode a motorcycle but own 2 |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wanted: Clip Ons and Rear Sets for pre-gen | Mike K | Items Wanted | 4 | May 18th, 2015 07:35 PM |
Rear shock option for pre-gen. | Jammerkiller | 1986 - 2007 Ninja 250R Tech Talk | 11 | April 24th, 2014 08:51 PM |
Pre Gen Rear Fairing | 20ninja03 | Motorcycle-related | 1 | April 24th, 2011 08:42 PM |
Interest in a Pre-Gen Rear rack? | mikesova | General Motorcycling Discussion | 2 | September 14th, 2010 04:58 AM |
Help a newb install rear sets (with photos) | jamesbernatchez | 2008 - 2012 Ninja 250R Tech Talk | 5 | November 16th, 2009 11:17 PM |
|
|