January 25th, 2014, 04:58 PM | #1 |
ninjette.org member
Name: DJ
Location: Lake Worth
Join Date: Mar 2013 Motorcycle(s): Ninja 300 Posts: 47
|
DIY chain and sprockets
Hey guys I am trying to decide if I can change the chain and sprockets myself or if I'm going to have to cough up the money to have a shop do it. I was wondering if anyone knows the difficulty of this job? It seems like it should be ok but I dont know if ill need any special tools or anything. The thing I know the least about is the chain. Does the master link require any special tools?
Thanks for any info! |
|
January 25th, 2014, 05:14 PM | #2 |
Ms. Personality
Name: CB
Location: Murvill, TN
Join Date: Jan 2009 Motorcycle(s): Depends on the week you ask Posts: A lot.
|
Pretty easy job. You are going to need some kind of cutting tool and an impact gun along with the required sockets (not sure of sizes) and a ratchet. A torque wrench wouldn't be a bad idea if you have access to one or can get one for cheap.
Depends on what kind of master link you have as to how you will put it on. |
|
January 25th, 2014, 05:20 PM | #3 | |
ninjette.org member
Name: DJ
Location: Lake Worth
Join Date: Mar 2013 Motorcycle(s): Ninja 300 Posts: 47
|
Quote:
|
|
|
January 25th, 2014, 05:24 PM | #4 |
Ms. Personality
Name: CB
Location: Murvill, TN
Join Date: Jan 2009 Motorcycle(s): Depends on the week you ask Posts: A lot.
|
You need an impact to remove the nut holding the front sprocket on. It's usually on there pretty tight (idk the torque spec). I suppose you could get it off with a breaker bar but the bike needs to be IN gear with the chain ON and the rear wheel touching the ground with quite a bit of weight on it. Usually easier to just use an impact.
I've used both kinds of master links and haven't had problems with either. There is a clip on type that some people say you shouldn't use and the other type is just like the factory one. It requires a clamp, vise or a chain tool to install properly. |
|
January 25th, 2014, 05:26 PM | #5 |
Ms. Personality
Name: CB
Location: Murvill, TN
Join Date: Jan 2009 Motorcycle(s): Depends on the week you ask Posts: A lot.
|
|
|
January 25th, 2014, 05:35 PM | #6 | |
ninjette.org member
Name: DJ
Location: Lake Worth
Join Date: Mar 2013 Motorcycle(s): Ninja 300 Posts: 47
|
Quote:
|
|
|
January 25th, 2014, 05:37 PM | #7 |
ninjette.org sage
Name: Jim
Location: NJ
Join Date: Nov 2012 Motorcycle(s): Ninja 300, KTM EXC610SMR Posts: 913
|
On the 1-10 scale the whole job is about a 3 in difficulty.
Invest in this tool IMO, http://www.revzilla.com/product/rk-c...d=scsho1531254 if you plan on riding bikes into the future. I didn't shop prices so look around. You will be able to use that for the rest of your life if you take care of it. I use it as a press too crush the master together to get a clip on it if it isn't the rivet style. |
|
January 26th, 2014, 09:25 AM | #8 |
ninjette.org member
Name: DJ
Location: Lake Worth
Join Date: Mar 2013 Motorcycle(s): Ninja 300 Posts: 47
|
That tool definitely seems like its worth it. As far as sprockets go are they pretty universal in size? I know the amount of teeth can vary but when I'm shopping online I dont really see any options for different sizes on different bikes.
|
|
January 26th, 2014, 09:36 AM | #9 | |
Participant
Name: Dave
Location: South of Seattle
Join Date: Oct 2012 Motorcycle(s): '94 K75 std Posts: Too much.
MOTM - Aug '15
|
Quote:
High-end tools are nice, especially when you're at a point in life where you can afford it. |
|
|
January 26th, 2014, 09:46 AM | #10 |
ninjette.org sage
Name: Jim
Location: NJ
Join Date: Nov 2012 Motorcycle(s): Ninja 300, KTM EXC610SMR Posts: 913
|
I've used and owned cheaper stuff too. That one was worth the investment. It stays in the box on the shelf and is a pleasure to operate. I expect it to last thru my kids lifetime too.
The key to building a nice tool collection is knowing where to save and where to spend. Pliers and screwdrivers, hammers and such, save as much as you can, (Harbor Freight!). Even mid quality wrenches are OK these days, Craftsman or Home Depot stuff. That chain tool is worth the investment. Buy it with the $ you saved in labor doing it yourself. Ratchet handles are a good place to spend a bit more too, as the mid grade stuff is so failure prone these days. Junk! Craftsman stuff used to have a lifetime warranty that you never used, now I return the damn 3/8" drive things every few months. |
|
January 26th, 2014, 07:21 PM | #11 |
Track Clown
Name: Chris
Location: Kingman, AZ
Join Date: May 2012 Motorcycle(s): '08 250R, 21 MV F3 800, Kawasaki 400 build Posts: A lot.
MOTM - Sep '15
|
if you dont have an impact gun, you can use a 2x4 between the wheel and swing arm to loosen the front sprocket. impact guns make it really easy.
|
|
January 28th, 2014, 08:32 AM | #12 |
ninjette.org guru
Name: Christina
Location: Toronto
Join Date: Jul 2012 Motorcycle(s): 2013 Ninja 300, 2007 Gsxr 600, R6-sold :( Posts: 270
|
Impact gun with the bike in gear seems like a bad idea. I wouldn't put strain on the gearbox like that. A regular breaker bar with a piece of wood between the swingarm and wheel are a safer choice.
|
|
January 28th, 2014, 10:08 AM | #13 |
Moo
Name: David
Location: Toronto'ish, Canada
Join Date: Feb 2012 Motorcycle(s): 2013 Ninja 300 Posts: 103
|
I took the best of both worlds... I wrapped my breaker bar in a towel, jammed it in the rear wheel, put the bike in neutral and used an impact gun to remove the front sprocket :P
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
new chain and sprockets | yogurtpooh | 2008 - 2012 Ninja 250R Tech Talk | 11 | January 31st, 2015 02:11 PM |
Chain and Sprockets | ChaoSS | 2008 - 2012 Ninja 250R Tech Talk | 21 | March 18th, 2013 03:49 PM |
New chain and sprockets. | erbarry88 | 2008 - 2012 Ninja 250R Tech Talk | 3 | October 15th, 2012 09:59 AM |
Chain/Sprockets | Lil_Green_Demon | 2008 - 2012 Ninja 250R Tech Talk | 1 | September 9th, 2012 04:40 PM |
Sprockets and Chain | indr | 2008 - 2012 Ninja 250R Tech Talk | 8 | February 6th, 2011 04:51 PM |
|
|