October 4th, 2010, 08:04 PM | #1 |
ninjette.org sage
Name: W
Location: Austin, TX
Join Date: Mar 2010 Motorcycle(s): 2010 Ninja 250R (sold), 2012 Tuono V4R Posts: 512
|
Front brake line routing with SS lines
My friend and I just spent about 5 hours replacing the brake pads and brake lines on my bike. (I replaced the lines with Galfer SS lines and Vesrah pads for the brake pads.)
We got the job done, but there's one thing that kind of bothers me. On the front line, there's a guide that is attached to the radiator bracket with a 10mm bolt. With the OEM line, there's a rubber grommet that is permanently on the line that goes in the guide. What I did was put the new Galfer SS line through that guide, but without any sort of extra padding. Is that okay, or should I come up with an appropriate substitute grommet?
__________________________________________________
2010 Kawasaki Ninja 250R - "Aria" (sold) 2012 Aprilia Tuono V4R - "Perrine" Proof that Harleys and Ninjettes are friendly with each other |
|
October 4th, 2010, 08:22 PM | #2 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
When I installed my galfer line back when..what I did was get a razor and carefully cut the stock grommet off the OEM line and slipped it over the bracket/galfer line...I was worrying that the metal will rub onto the new line and that has been working great.
|
|
October 4th, 2010, 08:27 PM | #3 |
250Arrrgh!
Name: Andrew
Location: San Francisco
Join Date: Jan 2009 Motorcycle(s): 2009 250R, 2001 996 Posts: 143
|
What I did was I carefully cut that grommet off of the old rubber line and stuck it back in the bracket and routed the galfer line through that. The galfer line is not nearly as fat as the stock line but this works pretty well...allows you to route the stainless line through that bracket without the metal bracket scraping up the plastic covering on the new line.
|
|
October 4th, 2010, 08:44 PM | #4 |
self wrencher
Name: john
Location: houston
Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.
|
I heard an echo
|
|
October 4th, 2010, 08:49 PM | #5 |
ninjette.org sage
Name: W
Location: Austin, TX
Join Date: Mar 2010 Motorcycle(s): 2010 Ninja 250R (sold), 2012 Tuono V4R Posts: 512
|
Yeah, I better get my X-Acto knife and get cutting!
Thanks, guys! (Edit: The grommet is now on the new line.)
__________________________________________________
2010 Kawasaki Ninja 250R - "Aria" (sold) 2012 Aprilia Tuono V4R - "Perrine" Proof that Harleys and Ninjettes are friendly with each other Last futzed with by Soujyu; October 5th, 2010 at 07:20 AM. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Picture Request: Front Brake Line Routing | Brother Michigan | 2013 - 2017 Ninja 300 General Discussion | 1 | September 8th, 2014 03:41 PM |
New Galfer Stainless Brake Lines Front 2008-2012 Kawasaki EX250F Ninja 250R | tcbmellowd | Motorcycle-related | 3 | August 2nd, 2013 06:40 PM |
Spiegler front brake lines in black NEW | RaceBikeRentals | Motorcycle-related | 13 | May 12th, 2011 07:21 PM |
|
|