Anyone have mods planned in the near future?

[wild-bill]

I received my 15 tooth sprocket and digital water temp gauge in the mail this week. And the Fiamm freeway blaster horn should be here in the next few days. I'll prolly wait for the horn before I install the gauge so the fairing will only have to removed once. But the sprocket is going on this weekend! What are you planning on doing to your Ninjette soon?

[Alex]

Related thread here that should probably be bumped at some point; it was a good list of mods people had going on with their ninjettes.

[scotty]

Originally Posted by Alex

Related thread here that should probably be bumped at some point; it was a good list of mods people had going on with their ninjettes.

That was a good thread, but I will add to this one too.

Next week, I plan on relocating my rear brake reservoir, change out my foot pegs for my passanger ones, start preping my wheels so I can start polishing them, and last, just clean the bike. It has a lot of dust on her

[kkim]

not a mod, but I need to clear out the pilot jets. Bike has been sitting for so long, the carbs need to be cleaned.

[scotty]

Originally Posted by kkim

not a mod, but I need to clear out the pilot jets. Bike has been sitting for so long, the carbs need to be cleaned.

That wouldn't happend if you rode more!!

[CThunder-blue]

I'm in the middle of doing an HID retrofit with mini D2S projectors

[wvninja]

thinking about upgrading to hids once the weather warms up and i can work on the bike

[V2Neal]

I'm planning on replacng my current AreaP exhaust with the new racing system.
Maybe some new paint.
New set of tires.
New Chain and sprockets.

Mostly just maintenance items. LOL

[PsychoNinja]

I will be installing my No Cut Brake Light Modulator soon.
I also want to get:
-Rear Fender Eliminator
-Double Bubble Windscreen
-Rear Tire Hugger
-Rear Seat Cowl

BTW, does anyone have any experience dealing with Projekt D here in the States or at least heard anything about them?

I am thinking about ordering some of the above listed stuff through them.

[PsychoNinja]

Originally Posted by CThunder-blue

I'm in the middle of doing an HID retrofit with mini D2S projectors

Nice!

[Yasko]

I just got a 15t put on my bike. Wowow

Thanks Monkey Wrench Cycles.

[wild-bill]

Originally Posted by Yasko

I just got a 15t put on my bike. Wowow

Thanks Monkey Wrench Cycles.

I just put my 15t sprocket on. Now I need to dress up and go for a ride!

[sherjay]

Originally Posted by CThunder-blue

I'm in the middle of doing an HID retrofit with mini D2S projectors

Please post a DIY with pics. I've been wanting to do that. But seems like a lot is work with the fitting. Might even need a spare headlight to mess around with. This conversion is sweet.

Once spring arrives and I rescue her from the neighbours garage;

straps and bag http://www.ninjette.org/forums/showt...496#post245496
Mirror extenders http://www.ninjette.org/forums/showthread.php?t=18122
Double bubble windscreen
Possibly adjustable levers

Also want to add some strategically placed reflecticeve tape and maybe a strip to my helmet - any suggestions on good and plain reflective tape?

[Daeldren]

I have some plans to setup my Ninja for E Supertock racing. With the wedding coming up though that will probably be a slow process. Main reason why I went ahead and picked the savage up for street riding.

So I guess down the road Im looking at
-Race glass
-woodcraft rearset
-BRT-TIS
-Full Exhaust (looking at either Area P or the new Sportisi exhaust)
-I do need better Race gloves, boots and probably a scorpion exo 700 helmet.
-braided brake lines for front at least.
-steering damper (required by WERA last time I checked)
-Tires of course

Luckily since I'm so light the stock suspension is pretty stiff for me already so I will probably just keep it as is until I can pinpoint where I need some more dampening etc....

[kamikaze]

Originally Posted by CThunder-blue

I'm in the middle of doing an HID retrofit with mini D2S projectors

I"m looking to do the same, but haven't managed to find a cheap spare headlight housing that I can tear into.

you using the Morimoto projectors?

[CThunder-blue]

I believe they are Morimoto, but I purchased them off Ebay for $30 less than the ones on TRFS. No brand name given, but I doubt there are many being produced of the same exact design. Just to give some info that I've found: The stock headlight is sealed with silicone, not the usual Butyl rubber common in other headlights. I'm going to be using 3M windo-weld to reseal mine. It's a urethane sealant used in most window replacements.

[JMcDonald]

Tomorrow Im going to try out the advanced map on the BRT TIS. This weekend Im going to sand and repaint my left fairing because it came out awful and I didn't have time to redo it before school started (right side looks quite good, but the left side literally looks like textured drywall, lol). I might then touch up a few spots that got nicked before the paint cured, and then I might also swap out the main jets for 112, just to see.

[Francis]

Just Pazzo Levers I think.

I have a Lime Green 2010. My helmet's red/black and I got a Icon Contra Slate so the ICON is red.

I was thinking of getting the Red Lever with Green Tab. Still not too sure if i wanna go long or short though. I'm trying to get used to four finger break/clutch because it's 'safer' but I'm really more comfortable with 2 fingers o.O

oh, and RAM mount for a GPS/iPhone lol. No fender eliminators for me!

[bowersox3589]

I've got too much stuff I want to do to my bike.
First thing is getting it painted.
Bikemonkey integrated taillight + proton flushmounts
Jet kit
Hugger
Pazzo levers
Club 517 rearsets
New bar ends and grips
And last but not least, my wheel trim kit.
Most of the stuff hasn't arrived yet, but it's really cold in Pa right now anyway.

[zdoc]

Already did my k&n r0990 and Factory pro jet kit this winter. Took it for a ride yesterday, it was 32 degrees lol. Gonna end up doing an exhaust too before spring.