March 14th, 2012, 11:44 AM | #1 |
ninjette.org member
Name: Jason
Location: Fort Drum, NY
Join Date: Aug 2011 Motorcycle(s): 2004 Ninja 250R Posts: 46
|
Carb Slide
Does anyone know what the factory hole size is for the slides. Not the needle hole but the vaccum hole.
|
|
March 14th, 2012, 04:21 PM | #2 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
No idea exactly. What are you looking to do to your slides? enlarge the hole for improved throttle response? That can be done with a #70 drill bit to make a 2nd hole, but I had issues with that last summer, so do that at your own risk. I will be going back and opening up the #70 holes again, and playing with my needle mixture to smooth out the poblems I had from drilling my slides
|
|
March 14th, 2012, 04:58 PM | #3 |
ninjette.org member
Name: Jason
Location: Fort Drum, NY
Join Date: Aug 2011 Motorcycle(s): 2004 Ninja 250R Posts: 46
|
They where already drill larger and I want to go back to or.
Posted via Mobile Device |
|
March 14th, 2012, 05:03 PM | #4 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Oh that makes more sense now.
Just curious, have you noticed any oddities when cruising at exactly 6k? does your bike completely stutter and stumble and choke? that's what mine did when I drilled my slides and what made made me decide to seal the holes up |
|
March 14th, 2012, 06:18 PM | #5 |
ninjette.org member
Name: Jason
Location: Fort Drum, NY
Join Date: Aug 2011 Motorcycle(s): 2004 Ninja 250R Posts: 46
|
Yep
Posted via Mobile Device |
|
March 14th, 2012, 06:23 PM | #6 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
can you do me a huge favor? Like HUGE favor.
Want to add another washer to your needles and see if it helps at all? |
|
March 14th, 2012, 06:38 PM | #7 |
ninjette.org member
Name: Jason
Location: Fort Drum, NY
Join Date: Aug 2011 Motorcycle(s): 2004 Ninja 250R Posts: 46
|
Mine was on the 4th clip I moved it up to 3rd, but I'll be messing with it this weekend.
Posted via Mobile Device |
|
March 14th, 2012, 06:57 PM | #8 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
Cool tell me how that goes. I suspect raising the needles a little might help with that 6k issue because I've read of people who haven't had any issues with that, so I know it has to be possible to do somehow. I want throttle response it got better when I installed slipons. Then it got better again when I did my intake and jetted. I want more
|
|
March 14th, 2012, 06:59 PM | #9 |
ninjette.org member
Name: Jason
Location: Fort Drum, NY
Join Date: Aug 2011 Motorcycle(s): 2004 Ninja 250R Posts: 46
|
I also have a R6 throttle tube and love it
Posted via Mobile Device |
|
March 14th, 2012, 07:00 PM | #10 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
zip-tie throttle mod. same idea but cheaper.
|
|
March 17th, 2012, 05:48 PM | #11 |
ninjette.org member
Name: Jason
Location: Fort Drum, NY
Join Date: Aug 2011 Motorcycle(s): 2004 Ninja 250R Posts: 46
|
Ok so I got my new jets in on Friday and got a chance to put them in today. The 110's are I think spot on for WOT. Had to raise the needles up so 5th from the top and opened up mixture screws to 3.5 but still had some popping and surging at cruise so think I'll go to 3.75 and see how that does. Next step is a #40 pilot jet.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: Motion Pro Syncpro Carb Tuner (Carb Sync) $60 Shipped | menikmati | Motorcycle-related | 4 | April 8th, 2020 12:39 AM |
Valve adjustment, carb clean, carb sync? | amad1972 | 1986 - 2007 Ninja 250R Tech Talk | 2 | July 29th, 2014 09:42 PM |
Highway slide | Christofini | !%@*#$%!)@#&!%@ I crashed! | 8 | September 8th, 2013 04:11 PM |
Carb Slide Orientation | lotusseven | 1986 - 2007 Ninja 250R Tech Talk | 7 | November 25th, 2010 04:43 PM |
|
|