ninjette.org

Go Back   ninjette.org > 2008 - 2012 Ninja 250R > 2008 - 2012 Ninja 250R Farkles

Notices

Reply
 
Thread Tools
Old July 4th, 2017, 01:02 PM   #1
GixSixR1S3Ninj
ninjette.org member
 
Name: Bill
Location: New England
Join Date: Jun 2017

Motorcycle(s): 2007 Kawasaki Ninja 250R

Posts: 27
Replacement fairings

Two questions:

One, does anyone know for sure a good place to order full replacement kits for fairings? I did a quick search and saw a couple zzr250 fairing sets, wicked cheap, high $200a to low $300s, but they say they are only good to 04, mine is an 06.

Two, any sites I can buy individual fairings, or does anyone have spares that they would sell me just the left side fairing, between the tail and the tank?

Thanks
GixSixR1S3Ninj is offline   Reply With Quote




Old July 4th, 2017, 01:10 PM   #2
GixSixR1S3Ninj
ninjette.org member
 
Name: Bill
Location: New England
Join Date: Jun 2017

Motorcycle(s): 2007 Kawasaki Ninja 250R

Posts: 27
Wow, am I wrong or are the pregens kinda forgotten? Seems most stuff available are 08+
GixSixR1S3Ninj is offline   Reply With Quote


Old July 4th, 2017, 01:33 PM   #3
GixSixR1S3Ninj
ninjette.org member
 
Name: Bill
Location: New England
Join Date: Jun 2017

Motorcycle(s): 2007 Kawasaki Ninja 250R

Posts: 27
Whoops! Wrong generation! On my phone... Sorry. Can mods switch it? Thanks
GixSixR1S3Ninj is offline   Reply With Quote


Old July 4th, 2017, 03:29 PM   #4
GixSixR1S3Ninj
ninjette.org member
 
Name: Bill
Location: New England
Join Date: Jun 2017

Motorcycle(s): 2007 Kawasaki Ninja 250R

Posts: 27
Boom, got one. Now, I have to get the old bolt out that holds it in on the bottom. Any chance it's typical 1/4 or 3/8 these? I noticed its a Phillips tip, I expected an allen
Attached Images
File Type: jpg Screenshot_2017-07-04-18-23-10.jpg (47.5 KB, 0 views)
GixSixR1S3Ninj is offline   Reply With Quote


Old July 4th, 2017, 03:29 PM   #5
GixSixR1S3Ninj
ninjette.org member
 
Name: Bill
Location: New England
Join Date: Jun 2017

Motorcycle(s): 2007 Kawasaki Ninja 250R

Posts: 27
Thread*
GixSixR1S3Ninj is offline   Reply With Quote


Old January 12th, 2018, 12:12 PM   #6
fred smoot
ninjette.org member
 
fred smoot's Avatar
 
Name: Fred
Location: St. Louis
Join Date: Jan 2014

Motorcycle(s): my own.

Posts: 85
fairings...

will be metric, 6mm is close to 1/4" diameter, 8mm is close to 5/16" diameter.

Fred
__________________________________________________
'09 Ninja 250R
"If everything seems under control, you're not going fast enough." -Mario Andretti
fred smoot is offline   Reply With Quote


Old January 12th, 2018, 02:35 PM   #7
Ram Jet
ninjette.org certified postwhore
 
Ram Jet's Avatar
 
Name: Bill
Location: Port Huron, Michigan
Join Date: Mar 2017

Motorcycle(s): 2007 Kawasaki 250 Ninja, 1982 Honda Ascot FT500

Posts: A lot.
Quote:
Originally Posted by GixSixR1S3Ninj View Post
Boom, got one. Now, I have to get the old bolt out that holds it in on the bottom. Any chance it's typical 1/4 or 3/8 these? I noticed its a Phillips tip, I expected an allen
6mm X 28mm.

Bill
__________________________________________________
Insanity: doing the same thing over and over again expecting different results each time.
Ram Jet is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Question for Replacement Jetfoi 1986 - 2007 Ninja 250R Tech Talk 4 March 10th, 2015 06:40 AM
replacement parts reabo 2008 - 2012 Ninja 250R Tech Talk 4 October 4th, 2013 08:22 AM
Speedometer replacement siebadn 1986 - 2007 Ninja 250R Tech Talk 2 September 18th, 2012 08:44 PM
Replacement Fairings and Painting kevlarorc 2008 - 2012 Ninja 250R Tech Talk 17 January 21st, 2010 11:44 PM
tach replacement Broom 2008 - 2012 Ninja 250R Tech Talk 9 June 4th, 2009 05:34 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 11:55 PM.


remote server monitor
Powered by vBulletin®
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are Copyright 2016 ninjette.org, All rights reserved.