April 6th, 2014, 02:24 PM | #1 |
ninjette.org member
Name: Baz
Location: Takoma Park, MD
Join Date: Jan 2014 Motorcycle(s): 2000 EX250 Ninja Posts: 59
|
Need ex250 carb diaphram
I was wondering why my 2000 ex250 would not idle without choke. Opened carbs to clean and found one diaphram rubber is torn & chewed on one side where it fits into carb body. Thanks, previous owner!
Im in DC area. Anybody have a spare? Thnks, Baz Yes, this was put back in the carb in this condition by a previous owner. https://www.flickr.com/photos/69874352@N00/13692906455/ Last futzed with by baz666; April 7th, 2014 at 07:22 AM. |
|
April 6th, 2014, 03:23 PM | #2 |
ninjette.org member
Name: Juan
Location: Rancho Cucamonga
Join Date: Jan 2013 Motorcycle(s): 1995 Kawasaki Ninja EX250 with 8500 miles!! Posts: 41
|
you might wanna go post in the marketplace to get a better chance of a reply, although you will get one on here too
__________________________________________________
are you aware? |
|
April 6th, 2014, 03:29 PM | #3 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
/moved to items wanted
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
April 6th, 2014, 05:26 PM | #4 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
I bought one off eBay and it worked fine. They sell replacements but it requires some hacking to reuse original parts
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
April 7th, 2014, 07:23 AM | #5 | |
ninjette.org member
Name: Baz
Location: Takoma Park, MD
Join Date: Jan 2014 Motorcycle(s): 2000 EX250 Ninja Posts: 59
|
Quote:
Are you talking about the diaphragm? It doesn't fit properly and needs to be modified? thanks, Baz |
|
|
April 7th, 2014, 07:50 AM | #6 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
https://www.ninjette.org/forums/showthread.php?t=123535
I had a tear so I bought a replacement rubber diaphragm off of ebay and had to cut the the old and put in the new.
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
April 8th, 2014, 04:52 PM | #7 |
ninjette.org member
Name: Baz
Location: Takoma Park, MD
Join Date: Jan 2014 Motorcycle(s): 2000 EX250 Ninja Posts: 59
|
I got the diaphragm off the slider without chopping up the plastic slider. I used a lot of WD40 and a tiny drill bit with a dremel to get the remains of the rubber out of the thin slot where the diaphragm rubber is seated. I still have to get some bits of rubber out of that slot. It's very slow going but does clean out eventually.
Do you think I still near to chop the top of the slider to get the diaphragm rubber onto the slider or will the diaphragm stretch enough to be seated in the slot? thanks, Baz https://www.flickr.com/photos/69874352@N00/13726965765/ |
|
April 8th, 2014, 05:52 PM | #8 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
https://www.ninjette.org/forums/showthread.php?t=136261
I want to say this member was able to. Might want to shoot him a message and ask. I don't think he has been active lately though but may be worth trying.
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
April 9th, 2014, 03:27 PM | #9 |
ninjette.org member
Name: Ish
Location: San Clemente, California
Join Date: Nov 2013 Motorcycle(s): Ninja 250 2001 KX125 2001 Posts: 85
|
I have a spare working carburetor that i can sell for cheap.
Needs a good cleaning though. Let me know |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FS: Motion Pro Syncpro Carb Tuner (Carb Sync) $60 Shipped | menikmati | Motorcycle-related | 4 | April 8th, 2020 12:39 AM |
Carb rebuild kits for EX250 | Linkin | 2008 - 2012 Ninja 250R Tech Talk | 1 | March 18th, 2015 04:05 PM |
09 Diaphram issue, pics inside. HELP | Justanothermp5 | 2008 - 2012 Ninja 250R Tech Talk | 6 | October 22nd, 2014 05:11 PM |
Valve adjustment, carb clean, carb sync? | amad1972 | 1986 - 2007 Ninja 250R Tech Talk | 2 | July 29th, 2014 09:42 PM |
|
|