Stupid Schematic

HKr1 · June 18th, 2013, 01:24 PM

So Iam made this little harness to use the 250r type CDI in another application. Going by both bikes schematics, it was a snap.

BUT,
In the Full usa/canada/aussie schematic, it doesnt show which coil is which(1 or 2). In the break down of the ignition system, it shows #1 green, #2 black.
Well, I made the harness using that info...Just happen to be going thru the service manual and see the Full Indonesia schematic #1 is Black & #2 Green!
I go look at the 250r, it is in fact #1 Black, #2 Green...... DAM, had to pull the pins and swap them on the connector.
Good thing I didnt try and fire it up... would have been lost, thinking this swap just doesnt work.

Good job kawasaki

Alex · June 18th, 2013, 01:30 PM

Motofool · June 18th, 2013, 01:56 PM

Quote:

Originally Posted by HKr1

..........Going by both bikes schematics, it was a snap.

http://www.ninjette.org/forums/showthread.php?t=136226

alex.s · June 18th, 2013, 03:22 PM

i'm curious what engine you were using the ninja cdi with

HKr1 · June 18th, 2013, 04:19 PM

Quote:

Originally Posted by Alex

green_is_the_new_black_design.gif

Ha Ha Ha...

Quote:

Originally Posted by Motofool

http://www.ninjette.org/forums/showthread.php?t=136226

But, we go by schematics

Quote:

Originally Posted by alex.s

i'm curious what engine you were using the ninja cdi with

If this passes the test with the stock 250r cdi. I want to run the BRT, or if I can find a couple - JettingPro cdi's for the zrx

June 18th, 2013, 01:24 PM	#1
HKr1 IC2(SW) Name: Kerry Location: Pensacola Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.	Stupid Schematic So Iam made this little harness to use the 250r type CDI in another application. Going by both bikes schematics, it was a snap. BUT, In the Full usa/canada/aussie schematic, it doesnt show which coil is which(1 or 2). In the break down of the ignition system, it shows #1 green, #2 black. Well, I made the harness using that info...Just happen to be going thru the service manual and see the Full Indonesia schematic #1 is Black & #2 Green! I go look at the 250r, it is in fact #1 Black, #2 Green...... DAM, had to pull the pins and swap them on the connector. Good thing I didnt try and fire it up... would have been lost, thinking this swap just doesnt work. Good job kawasaki
	1 out of 1 members found this post helpful.

June 18th, 2013, 03:22 PM	#4
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	i'm curious what engine you were using the ninja cdi with __________________________________________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CDI Pinout/Schematic/Wiring	indr	2008 - 2012 Ninja 250R Tech Talk	2	January 28th, 2013 09:56 AM
stupid stupid video	toua70	General Motorcycling Discussion	24	September 28th, 2012 04:32 PM
Stupid electronics!	MasterCylinder	1986 - 2007 Ninja 250R Tech Talk	38	May 15th, 2012 03:54 PM
I did something really stupid today...	road_rascal	Riding Skills	15	June 21st, 2011 01:00 PM

June 18th, 2013, 01:30 PM	#2
Alex ninjette.org dude Name: 1 guess :-) Location: SF Bay Area Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much. Blog Entries: 7	__________________________________________________ Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)