November 12th, 2019, 09:40 PM | #1 |
ninjette.org member
Name: Cal
Location: San Francisco
Join Date: Jun 2017 Motorcycle(s): '09 Ninja 250R Posts: 180
|
Do I Need New Fork Bushings?
Not sure on how to judge when new form bushings are needed. The surface doesn't have any dents, but some of the bronze (?) Is worn off
|
|
November 13th, 2019, 02:56 AM | #2 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Feeler gauges
|
|
November 17th, 2019, 11:30 AM | #3 |
ninjette.org certified postwhore
Name: Tom
Location: Northern Virginia
Join Date: Jul 2015 Motorcycle(s): 2001 Ninja 250, 2019 Harley Ultra Classic, 2001 Suzuki SV650 Posts: A lot.
MOTM - Jan '16
|
You have the fork that far apart, might as well just rebuild the whole thing and not have to worry about it for a while. A new set of bushings is about $34.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Supplier for Suspension Rocker Arm Bushings/Sleeves? | nocturncal | 2008 - 2012 Ninja 250R Tech Talk | 2 | September 22nd, 2019 01:36 AM |
FS: Pregen : Fork Springs, Fork Clamp, Factory Pro Jet kit | FvnnyL3tt3r1ng | Motorcycle-related | 20 | February 24th, 2016 08:24 AM |
Bad Fork Seals or Bad Bushings? | Jono | General Motorcycling Discussion | 5 | March 26th, 2015 08:12 PM |
Pregen Forks, Triple, .80 Springs, Seals, Bushings, Driver | bagtf3 | Motorcycle-related | 6 | April 27th, 2013 08:18 AM |
Sloppy fork bushings after disassembly? | SV_Hadder | 1986 - 2007 Ninja 250R Tech Talk | 1 | April 29th, 2012 05:40 PM |
|
|