ninjette.org

Go Back   ninjette.org > 2008 - 2012 Ninja 250R > 2008 - 2012 Ninja 250R Tech Talk

Notices

Reply
 
Thread Tools
Old March 6th, 2010, 01:03 AM   #1
headshrink
ninjette.org certified postwhore
 
headshrink's Avatar
 
Name: Bob
Location: CA
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250r, '14 CBR500r

Posts: A lot.
cylinder head cover - gasket

As I study the SM, preparing for my valve adjustment, I noticed the instruction to replace the cover gasket.... I haven't seen that mentioned in any DIY (although I would expect it). I also went over my paperwork from when I had the dealer check the valves at 7.5K miles. Of course they charge for every little part, claimed the valves were in spec..... but no charge for a new gasket. Does that mean it doesn't need replacement, or they charged me for work they never did?
headshrink is offline   Reply With Quote




Old March 6th, 2010, 08:20 AM   #2
2WheelGuy
ninjette.org certified postwhore
 
2WheelGuy's Avatar
 
Name: Craig
Location: Silicon Valley, CA USA
Join Date: May 2009

Motorcycle(s): '98 EX250, '02 EX250, '08 250r, '03 SV650, '98 GSXR750 '03 Hayabusa, '87 YSR50, '84 ZX900, +MORE

Posts: A lot.
The valve cover gasket is made of rubber and reusable. Just be careful not to damage it because they are expensive. With care the gaskets can easily last over 20 years.
__________________________________________________
CraigHarris.org Pacific Track Time CraigsWeb
See you at 2014 MotoGP Laguna Seca! We'll be camping on Fox Hill.
AFM #278
2WheelGuy is offline   Reply With Quote


Old March 6th, 2010, 09:24 AM   #3
headshrink
ninjette.org certified postwhore
 
headshrink's Avatar
 
Name: Bob
Location: CA
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250r, '14 CBR500r

Posts: A lot.
Good to know... the SM lies I guess.
headshrink is offline   Reply With Quote


Old March 6th, 2010, 09:46 AM   #4
Racer x
ninjette.org certified postwhore
 
Racer x's Avatar
 
Name: Eric
Location: Iowa City
Join Date: May 2009

Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X

Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
Clean everything and use a dab of sealant near the corners of the half moon piece.You will be good to go,
Racer x is offline   Reply With Quote


Old March 6th, 2010, 09:49 AM   #5
headshrink
ninjette.org certified postwhore
 
headshrink's Avatar
 
Name: Bob
Location: CA
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250r, '14 CBR500r

Posts: A lot.
Quote:
Originally Posted by Racer x View Post
Clean everything and use a dab of sealant near the corners of the half moon piece.You will be good to go,
What type of sealant? I know the SM mentions silicone sealant.... but what are the names of a couple. I don't remember actually seeing that stuff.
headshrink is offline   Reply With Quote


Old March 7th, 2010, 11:53 AM   #6
headshrink
ninjette.org certified postwhore
 
headshrink's Avatar
 
Name: Bob
Location: CA
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250r, '14 CBR500r

Posts: A lot.
What type of sealant do I need to buy?
Edit: and can I get it at the auto part or hardware store?

Last futzed with by headshrink; March 7th, 2010 at 12:55 PM.
headshrink is offline   Reply With Quote


Old March 7th, 2010, 03:02 PM   #7
headshrink
ninjette.org certified postwhore
 
headshrink's Avatar
 
Name: Bob
Location: CA
Join Date: Dec 2008

Motorcycle(s): '08 Ninja 250r, '14 CBR500r

Posts: A lot.
Will this work? http://www.acehardware.com/product/i...568455.2629690
headshrink is offline   Reply With Quote


Old March 7th, 2010, 04:22 PM   #8
Momaru
ninjette.org certified postwhore
 
Momaru's Avatar
 
Name: Paul
Location: Roanoke, VA
Join Date: Jun 2009

Motorcycle(s): 2008 Candy Plasma Blue 250R

Posts: A lot.
That's exactly what I used on my last valve check and no leaks thusfar.
__________________________________________________
Proud member of the Blue Army
Momaru is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
head gasket? NorthKoast 2008 - 2012 Ninja 250R Tech Talk 14 March 10th, 2012 04:01 PM
Cylinder base gasket replacement kevlar250 1986 - 2007 Ninja 250R Tech Talk 1 October 22nd, 2011 07:19 AM
Re-use old head gasket ? Tony B 1986 - 2007 Ninja 250R Tech Talk 10 June 1st, 2011 06:27 AM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 03:58 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.