ninjette.org

Go Back   ninjette.org > 2008 - 2012 Ninja 250R > 2008 - 2012 Ninja 250R Tech Talk

Notices

Reply
 
Thread Tools
Old August 17th, 2019, 07:33 PM   #1
Dan the man
ninjette.org newbie
 
Name: Dan
Location: Seattle
Join Date: Aug 2019

Motorcycle(s): 2012 Kawasaki ninja 250R

Posts: 2
Hazard style flashing....still flashing.

I bought a 2012 Ninja from a guy and the stock turn signals in the rear didn't work but the front had been updated to LEDs but flashed at the same time. I bought two new LEDs and installed them in the rear and got a four-way flash syndrome. I looked under the seat and he had already replace the LED resistor. so I purchased a diode online and installed it today. But I'm still getting the four way flashers, any idea where I went wrong?
Dan the man is offline   Reply With Quote




Old August 17th, 2019, 07:40 PM   #2
csmith12
The Corner Whisperer
 
csmith12's Avatar
 
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011

Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track)

Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
Welcome Dan,

I am sure someone will know the answer to this and post up soon.

Good luck!
csmith12 is offline   Reply With Quote


Old August 17th, 2019, 09:12 PM   #3
CaliGrrl
ninjette.org certified postwhore
 
CaliGrrl's Avatar
 
Name: Kerry
Location: Ventura, CA
Join Date: Jan 2016

Motorcycle(s): Ninja650

Posts: A lot.
MOTM - Apr '18, Apr '17, Apr '16
Welcome!
CaliGrrl is offline   Reply With Quote


Old August 17th, 2019, 11:57 PM   #4
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Hi and welcome to Ninjette.

The issue is that a little power goes through indicator-bulb in dash and lights up other side. Diodes are supposed to block flashing power from crossing across dash bulb (two required). However, there's multiple ways to connect this and you'll also have to run new ground wire for bulb.

Show us the diode kit you got (link to product?).
Also show us how you wired it up. Such as photos of actual wires you connected diodes to.

Last futzed with by DannoXYZ; August 18th, 2019 at 09:55 AM.
DannoXYZ is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
Flashing ECU Abu_Mishary General Motorcycling Discussion 1 June 17th, 2016 09:38 AM
ECU Flashing garth285 2013 - 2017 Ninja 300 Tech Talk 30 July 13th, 2015 11:47 AM
Dashboard flashing? arnoldc6 2008 - 2012 Ninja 250R Tech Talk 4 March 27th, 2013 05:55 AM
HELP PLEASE!!! Proton's now flashing on both sides b4idie 2008 - 2012 Ninja 250R Tech Talk 2 April 11th, 2012 02:30 AM
Faster flashing signal randomwalk101 2008 - 2012 Ninja 250R Tech Talk 9 January 23rd, 2010 11:56 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 05:34 AM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.