December 24th, 2017, 06:14 PM | #1 |
ninjette.org member
Name: Ethan
Location: Maine
Join Date: Dec 2017 Motorcycle(s): 2010 Ninja 250r SE Posts: 38
|
What is supposed to go on the gauge cluster bolt
The bolt holds on the gauges but it looks like it’s missing some kind of grommet. I used a couple crush washers (because that’s all I had on hand) but I would like to know what actually goes on the bolt. Not sure if it’s supposed to be something rubber to absorb shock. (The bolt it question is the one with the goldish washers)
Last futzed with by EffaMoulton; December 24th, 2017 at 08:25 PM. |
|
December 25th, 2017, 08:59 AM | #3 |
ninjette.org member
Name: Ethan
Location: Maine
Join Date: Dec 2017 Motorcycle(s): 2010 Ninja 250r SE Posts: 38
|
With just the one washer the gauges flop all around, is that normal?
|
|
December 26th, 2017, 04:19 PM | #5 |
ninjette.org member
Name: Ethan
Location: Maine
Join Date: Dec 2017 Motorcycle(s): 2010 Ninja 250r SE Posts: 38
|
Didn’t think so, it’s possivle that the previous owner put way too long of bolts in, I’ll figure something out. Thanks.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Is the fan supposed to stay in all the time? | Omarel | 1986 - 2007 Ninja 250R Tech Talk | 20 | September 20th, 2016 07:14 AM |
Speedo Drd, Speedometer and Odometer Accuracy-Speedo Healer/drd | Klondike1020 | General Motorcycling Discussion | 8 | August 17th, 2014 12:23 AM |
What are you supposed to do... | corksil | Off-Topic | 13 | December 17th, 2013 01:13 AM |
When is your fan supposed to come on? | 20ninja03 | 1986 - 2007 Ninja 250R Tech Talk | 3 | February 26th, 2011 01:37 PM |
valve clearance??? what are they supposed... | ecannon1 | 1986 - 2007 Ninja 250R Tech Talk | 3 | May 20th, 2010 10:41 AM |
|
|