September 13th, 2012, 05:44 PM | #1 |
ninjette.org member
Name: Salim
Location: Philadelphia
Join Date: May 2012 Motorcycle(s): 2005 SV650S Posts: 195
|
Turn signal screws
So as I have been riding my ninja this summer, finally got into traffic! So much fun..but it seems I lost the left side rear turn signal screw. Does anyone know the dimensions of this screw I could pick up tomorrow at a hardware store?
I want to ride after work tomorrow but I am afraid I may get pulled over as the left rear signal hangs kind of down. I also plan on taking the bike to get inspected soon too. Just don't know if I will be pulled over for this? I didn't drop the bike I'm not sure how the screw got loose other than I was going over bumps in the road. Or my cover must have snagged and it got loose. |
|
September 13th, 2012, 06:34 PM | #2 |
ninjette.org member
Name: Jason
Location: Doylestown, PA
Join Date: Feb 2010 Motorcycle(s): 2009 Ninja 250 2016 Ninja 300 1994 KTM 300 EXC Posts: 123
|
I lost my right rear screw the other day and would need the dimensions of the also
|
|
September 13th, 2012, 07:00 PM | #3 |
ninjette.org member
Name: Salim
Location: Philadelphia
Join Date: May 2012 Motorcycle(s): 2005 SV650S Posts: 195
|
I found some normal fat looking screws around the house. I'm going to try it tomorrow to see if it holds it well. I can easily order it from powersportsplus but it would take so long to get to me I wouldn't be able to ride when I want.
|
|
September 14th, 2012, 10:45 AM | #4 |
ninjette.org member
Name: Jason
Location: Doylestown, PA
Join Date: Feb 2010 Motorcycle(s): 2009 Ninja 250 2016 Ninja 300 1994 KTM 300 EXC Posts: 123
|
I'll probably just take the other screw out go to a hardware store and have them match it up for me.
|
|
September 14th, 2012, 11:09 PM | #5 |
ninjette.org member
Name: Salim
Location: Philadelphia
Join Date: May 2012 Motorcycle(s): 2005 SV650S Posts: 195
|
You can use any medium thickness screw just not so long. I found an extra one that came with the battery I bought a while back and that went on fine. Just careful not to hit big bumps going so fast. The tail light section is sticking out a bit too but I checked it and it seems to be secured fine under the seat.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Looking for 09 oem rear turn signal and front turn signals and tail fairings | mbbernas | Items Wanted | 1 | September 11th, 2013 10:48 AM |
turn signal help | akcalhoun | 2008 - 2012 Ninja 250R Tech Talk | 24 | February 25th, 2013 06:09 PM |
'08 Turn Signal Relay | Countersteer | Motorcycle-related | 0 | June 10th, 2012 01:54 PM |
Turn signal went out, looking for a new turn signal | austinm911 | 2008 - 2012 Ninja 250R Farkles | 3 | January 23rd, 2011 08:58 PM |
WTB: Windscreen screws and stock turn signal lights | 00v_Lucky | Items Wanted | 1 | August 16th, 2009 10:52 PM |
|
|