April 29th, 2017, 02:28 PM | #1 |
ninjette.org newbie
Name: SJ
Location: Texas
Join Date: Apr 2017 Motorcycle(s): Ninja 300 Posts: 2
|
Using r6 throttle housing
Just bought a r6 Throttle assembly. Tube, housing, and cables. I would like to use the tube and r6 throttle housing, but the cables are too short.
Question is, what other cables can I get that will drop into r6 housing and tube, but are longer than r6 08+ cables? Thanks in advance. |
|
April 29th, 2017, 09:12 PM | #2 | |
ninjette.org member
Name: Nick
Location: USA
Join Date: Apr 2016 Motorcycle(s): 2009 Ninja 250r Posts: 109
|
Quote:
I have the motion pro R6 throttle tube on my 08 ninja, and the stock cables worked perfect for me. |
|
|
April 29th, 2017, 10:54 PM | #3 |
ninjette.org member
Name: Mark
Location: Australia
Join Date: Feb 2017 Motorcycle(s): 2011 Ninja 250R Posts: 219
|
Just use the throttle tube, everything fits when adjusted.
|
|
April 29th, 2017, 11:07 PM | #4 |
ninjette.org member
Name: Mark
Location: Australia
Join Date: Feb 2017 Motorcycle(s): 2011 Ninja 250R Posts: 219
|
Sorry, I just remembered that I needed to trim this part, it's not my pick but one I found on the googles.
Only trimmed about 5mm IIRC. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
R6 Throttle housing usable? | sjl007 | 2013 - 2017 Ninja 300 Tech Talk | 2 | July 19th, 2017 10:23 PM |
Throttle butterfly? Throttle doesn't snap back | CosmosUnchained | 2008 - 2012 Ninja 250R Tech Talk | 9 | September 17th, 2015 04:56 PM |
Full throttle kills bike, throttle lag response. | Diegone | 2008 - 2012 Ninja 250R Tech Talk | 10 | April 30th, 2014 03:25 AM |
Throttle Cable Housing | indr | 2008 - 2012 Ninja 250R Tech Talk | 2 | December 20th, 2012 07:44 PM |
|
|