Ordered fullsystem, recieved a slip-on - Page 2

Trixxr · December 5th, 2009, 08:36 AM

I showed my mom some of the US prices (She is into Audi), and she was completly shocked. I could've bought an Audi TT from 02 instead of buying a danish Ninja! :P FML

Trixxr · December 7th, 2009, 04:25 PM

Here is a shot of the painted heatshield. It's the exact same color as the other flat black metal parts.

noche_caliente · December 7th, 2009, 04:59 PM

Anders - looks good that way

Trixxr · December 7th, 2009, 05:03 PM

Quote:

Originally Posted by noche_caliente

Anders - looks good that way

Thanks alot mate! (: Can't wait for the rest of the pipes to arrive! Getting the power commander installed would just make my life complete...
ohh..
and Summer, get here soon :P

ztrack157 · December 7th, 2009, 05:37 PM

I would buy the pc3 out of country save a few bucks.

randomwalk101 · December 7th, 2009, 08:20 PM

no kidding...one of us can order the pc3 and ship it to you..I think it runs like $350 or something over here...

ztrack157 · December 7th, 2009, 08:24 PM

I can have Bran at sportisi send him one since he is a DJ dealer probbly get it a little cheaper than that Jean.

ztrack157 · December 7th, 2009, 08:34 PM

Bram says $300 plus shipping

Trixxr · December 8th, 2009, 03:05 AM

Quote:

Originally Posted by ztrack157

Bram says $300 plus shipping

Well, do you think he would be able to send it as a "Worthless" item? Due to toll and you know

And i'll just make a quick call, to check the danish price once more! Getting it custom mapped is expensive as hell!

Brb, checking up on it.

And plus shipping... you are aware of it has to be shipped to Denmark right?

Back : The danish price is 437$, so if he could ship it a way, that would eliminate the tolling, then i'd like to accept the deal! (:
(As long as the guy is sure that it'll fit my bike, EU 08, 250-K).

ztrack157 · December 9th, 2009, 08:26 PM

I will ask for verification with him and DJ. Shipping to you from there would be $70 or less. I can have him ship as a gift if needed.

ztrack157 · December 9th, 2009, 08:34 PM

I'll find out about the PCV too

ztrack157 · December 9th, 2009, 09:35 PM

PC3 $300 and the PC5 is $325 bram said he has both. I would need your shipping address for accurate shipping price because if you are in a remote location in Denmark, DHL chages a $22 extra fee. Shipping is $55 it just depends on whether or not the $22 fee will be assessed. So worst case scenario is $414 shipped for PC5 and $389 for a PC3 including ppal fees. Both put you cheaper than then it would cost you there. Is the PC5 available there?

Trixxr · December 10th, 2009, 06:31 AM

Yeh, the PC5 is available...
But with the shipping and all, the price is almost the same though...
I think i have to pass it mate, as i trust the danish warranty system, a bit more than the american!

sorry dude! (:

ztrack157 · December 10th, 2009, 01:53 PM

No probs. Just trying to save you money in the end.

December 7th, 2009, 04:59 PM	#43
noche_caliente ninjette.org certified postwhore Name: Kim Location: mundo de ensueño Join Date: Nov 2008 Motorcycle(s): '08 250 Posts: A lot.	Anders - looks good that way __________________________________________________ Progrip tank pad, blue rim stripes, blue Pazzos, Roaring Toyz lowering kit, Puig DB in dark smoke, Cortech sport tail, super mini tank, and saddlebags, OES swingarm spools and Intuitive frame sliders

December 7th, 2009, 05:37 PM	#45
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	I would buy the pc3 out of country save a few bucks. __________________________________________________ Sportisimoto USA is born.

December 7th, 2009, 08:24 PM	#47
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	I can have Bran at sportisi send him one since he is a DJ dealer probbly get it a little cheaper than that Jean. __________________________________________________ Sportisimoto USA is born.

December 7th, 2009, 08:34 PM	#48
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Bram says $300 plus shipping __________________________________________________ Sportisimoto USA is born.

December 9th, 2009, 08:26 PM	#50
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	I will ask for verification with him and DJ. Shipping to you from there would be $70 or less. I can have him ship as a gift if needed. __________________________________________________ Sportisimoto USA is born.

December 5th, 2009, 08:36 AM	#41
Trixxr ninjette.org member Name: Anders Location: Denmark Join Date: Nov 2009 Motorcycle(s): Ninja 250r Posts: 42	I showed my mom some of the US prices (She is into Audi), and she was completly shocked. I could've bought an Audi TT from 02 instead of buying a danish Ninja! :P FML

December 7th, 2009, 04:25 PM	#42
Trixxr ninjette.org member Name: Anders Location: Denmark Join Date: Nov 2009 Motorcycle(s): Ninja 250r Posts: 42	Here is a shot of the painted heatshield. It's the exact same color as the other flat black metal parts.

December 7th, 2009, 08:20 PM	#46
randomwalk101 self wrencher Name: john Location: houston Join Date: Dec 2008 Motorcycle(s): 08 250r and 07 600r Posts: A lot.	no kidding...one of us can order the pc3 and ship it to you..I think it runs like $350 or something over here...

December 9th, 2009, 08:34 PM	#51
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	I'll find out about the PCV too __________________________________________________ Sportisimoto USA is born.

December 9th, 2009, 09:35 PM	#52
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	PC3 $300 and the PC5 is $325 bram said he has both. I would need your shipping address for accurate shipping price because if you are in a remote location in Denmark, DHL chages a $22 extra fee. Shipping is $55 it just depends on whether or not the $22 fee will be assessed. So worst case scenario is $414 shipped for PC5 and $389 for a PC3 including ppal fees. Both put you cheaper than then it would cost you there. Is the PC5 available there? __________________________________________________ Sportisimoto USA is born.

December 10th, 2009, 06:31 AM	#53
Trixxr ninjette.org member Name: Anders Location: Denmark Join Date: Nov 2009 Motorcycle(s): Ninja 250r Posts: 42	Yeh, the PC5 is available... But with the shipping and all, the price is almost the same though... I think i have to pass it mate, as i trust the danish warranty system, a bit more than the american! sorry dude! (:

December 10th, 2009, 01:53 PM	#54
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	No probs. Just trying to save you money in the end. __________________________________________________ Sportisimoto USA is born.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ordered some new pants!	massacremasses	Motorcycle Gear	4	July 3rd, 2013 12:24 PM
Corbin Seat ordered	wardie	1986 - 2007 Ninja 250R Farkles	28	January 26th, 2013 12:14 PM
Anyone ever ordered from Sportisi?	MyronGanes	Motorcycle-related	3	October 2nd, 2012 05:01 AM
Just ordered some gear	caps	Motorcycle Gear	18	August 20th, 2011 04:47 PM
Ordered 16/41 sprockets :O	JMcDonald	2008 - 2012 Ninja 250R Tech Talk	10	October 11th, 2010 09:47 AM