February 21st, 2013, 09:53 AM | #1 |
ninjette.org newbie
Name: Troy
Location: Kutztown
Join Date: Feb 2013 Motorcycle(s): 2009 ninja 250r 2002 sv650 Posts: 8
|
jetting & shimming
Hello all, this is my first post. My son has a 2009 250R special edition. He has purchased a growler muffler for it and I am planning on doing the 2 shims on the needles. My question is will that be enough, or should I also be rejetting and if so what jetting is recommended?
Thanks for the input. |
|
February 21st, 2013, 10:17 AM | #2 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
2 shims should be fine for a slip-on muffler.
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
February 21st, 2013, 10:48 AM | #3 |
ninjette.org guru
Name: Michael
Location: Dayton, Ohio
Join Date: Jul 2012 Motorcycle(s): 2009 Ninja 250R SE Posts: 262
|
I am running the K&N airpod and stock exhaust and the bike has a 100 main jet, stock 38 pilot, and 2 shims under the needle and runs fantastic. It has aftermarket Dynojet needles though with the e-clip on the 3rd slot down from the top, I believe this is close to the factory needle though. 2 shims should be great for the bike and you may even be able to slightly up the jetting.
|
|
February 21st, 2013, 10:54 AM | #4 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Jettting Database thread
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Brand Spankin New Yoshi & Jetting. | The Jackal | 2008 - 2012 Ninja 250R Tech Talk | 3 | March 4th, 2013 03:58 AM |
Shimming / Needle Questions &Weirdness | Jim Moore | 1986 - 2007 Ninja 250R Tech Talk | 5 | November 3rd, 2012 09:27 AM |
jetting vs shimming? | SSR | 2008 - 2012 Ninja 250R Tech Talk | 16 | July 10th, 2011 10:57 PM |
Jetting for K&N Pods | 1994Ninja250F | 1986 - 2007 Ninja 250R Tech Talk | 10 | January 25th, 2011 11:44 AM |
Is jetting THAT much better than shimming? | diablo250 | 2008 - 2012 Ninja 250R Tech Talk | 10 | June 7th, 2009 02:34 PM |
|
|