Stock parts off a 2012

saxnbass · March 31st, 2012, 10:54 AM

So I have a fair bit of stock parts off my 2012 Ninjette. I can get up close pics or different angles of anything upon request. For sale I have:

Windscreen (painted black on the inside)
Rearsets
Levers
Handlebars
Turn Signals (Rear)
Bar Ends
Grips
Snorkel
Horn

PM offers; all are located in the Orlando area in FL and are available for shipping or local pickup.

And for pics:

The sticker residue is from my school parking sticker, I will get that cleaned off as much as possible before sending it out.

The toe peg on the clutch side is bent in towards the bike a tad from a 0mph drop (thought I had the kickstand down when I didn't). And the brake side has these silver circles on it:

Some minor damage on each lever;
Clutch:

Brake:

One still has the turn signal connector, the other I had to cut in order to get it undone. I cut it right at the connector and still have a connector that I will include, you'll just have to strip and solder it up for the one signal.

I also have the stock black exhaust, but I'd prefer that to be a local sale; not really wanting to ship it due to the weight making it pricey to ship.

Shikari99 · March 31st, 2012, 11:45 AM

Interested in a bar end and screw. Are they in clean condition?

CZroe · March 31st, 2012, 01:02 PM

Rear turn signals are identical to front signals except for lead length, which can usually be salvaged from the old signal. Just flip them so the drainage hole faces down.

saxnbass · March 31st, 2012, 05:00 PM

Quote:

Originally Posted by Shikari99

Interested in a bar end and screw. Are they in clean condition?

Yes, they are decently clean. If you want, I can PM you some close up pics of the ends of them. The left one has a bit of damage from when I dropped it at 0mph cause I thought I had the kickstand down when I didn't, and honestly, I don't remember ever noticing it when I still had the bar ends on the bike.

Shikari99 · March 31st, 2012, 05:44 PM

If its no trouble and you dont mind I'm definitely interested in them. Thanks!

choneofakind · March 31st, 2012, 05:52 PM

Eric, I'm assuming you're trying to make up as much money as possible on the wreck?

Put the rear shock up for sale. You'll get some interest from pregen riders.

Pull the carbs and sell those as well. People are always looking for slides/carbs that are good.

saxnbass · March 31st, 2012, 06:24 PM

Quote:

Originally Posted by choneofakind

Eric, I'm assuming you're trying to make up as much money as possible on the wreck?

Put the rear shock up for sale. You'll get some interest from pregen riders.

Pull the carbs and sell those as well. People are always looking for slides/carbs that are good.

I didn't buy the bike back from insurance, so this is stuff that I had. This is all stuff that came off and was replaced with aftermarket.

choneofakind · March 31st, 2012, 06:30 PM

Oh nevermind then. Hahaha I would have just taken that off before the insurance guys picked it up

abhijitz · April 1st, 2012, 09:54 PM

How much for levers shipped to 94065 work zipcode ? scratches are Ok. but are they bent?

rz3r0 · April 8th, 2012, 01:38 PM

Hey how much for this?

leed · April 10th, 2012, 08:37 PM

If abhijitz doesn't end up buying, let me know how much you'd want for the Levers to 27606. Debating on this or two-wheels (but shipping time..).

abhijitz · April 10th, 2012, 08:42 PM

Never got an answer to my pm or message

Quote:

Originally Posted by leed

If abhijitz doesn't end up buying, let me know how much you'd want for the Levers to 27606. Debating on this or two-wheels (but shipping time..).

drac · April 11th, 2012, 02:46 AM

PM sent regarding right side rearset.

saxnbass · April 11th, 2012, 08:58 AM

Currently pending sale on pretty much everything locally. If it falls through, I will PM you guys.

killamuf · April 13th, 2012, 02:38 PM

Hey man, how you been.?
damn bro i need the right handlebar (because mine is bent)

let me know if they don't sell. I am a definite buyer, ill take both of them off you. area code 19020 (just for shipping info, lol) and i see you have a CBR600rr now? nice.

whylton · April 27th, 2012, 08:39 PM

Just checking but if the left handle bar or turn signal is available I'd definitely be a buyer. Let me know.

March 31st, 2012, 10:54 AM	#1
saxnbass ninjette.org certified postwhore Name: Eric Location: Nashville, TN Join Date: Oct 2011 Motorcycle(s): 2009 CBR600rr Posts: A lot. Blog Entries: 1	Stock parts off a 2012 So I have a fair bit of stock parts off my 2012 Ninjette. I can get up close pics or different angles of anything upon request. For sale I have: Windscreen (painted black on the inside) Rearsets Levers Handlebars Turn Signals (Rear) Bar Ends Grips Snorkel Horn PM offers; all are located in the Orlando area in FL and are available for shipping or local pickup. And for pics: The sticker residue is from my school parking sticker, I will get that cleaned off as much as possible before sending it out. The toe peg on the clutch side is bent in towards the bike a tad from a 0mph drop (thought I had the kickstand down when I didn't). And the brake side has these silver circles on it: Some minor damage on each lever; Clutch: Brake: One still has the turn signal connector, the other I had to cut in order to get it undone. I cut it right at the connector and still have a connector that I will include, you'll just have to strip and solder it up for the one signal. I also have the stock black exhaust, but I'd prefer that to be a local sale; not really wanting to ship it due to the weight making it pricey to ship. __________________________________________________ My Mods \| My Bike's Ninjette Thread

April 1st, 2012, 09:54 PM	#9
abhijitz ninjette.org sage Name: Abhijit Location: San Francisco Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611	How much for levers shipped to 94065 work zipcode ? scratches are Ok. but are they bent? __________________________________________________ [ex-AFM #828 \| SMUSA #828 \| Sponsors : MotionPro \| LeoVince \| Insurrection Racing Gloves \| QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com

April 11th, 2012, 02:46 AM	#13
drac ninjette.org member Name: drac Location: VA Join Date: Mar 2012 Motorcycle(s): '88 Hurricane 600, '09 Ninja 250 Posts: 237	PM sent regarding right side rearset. __________________________________________________ While no trees were harmed in making this post, a large number of electrons were severely inconvenienced.

April 11th, 2012, 08:58 AM	#14
saxnbass ninjette.org certified postwhore Name: Eric Location: Nashville, TN Join Date: Oct 2011 Motorcycle(s): 2009 CBR600rr Posts: A lot. Blog Entries: 1	Currently pending sale on pretty much everything locally. If it falls through, I will PM you guys. __________________________________________________ My Mods \| My Bike's Ninjette Thread

April 13th, 2012, 02:38 PM	#15
killamuf ninjette.org member Name: Avais Location: Philadelphia, PA. USA Join Date: Dec 2011 Motorcycle(s): 2010 Ninja 250R Special Edition Posts: 180	Hey man, how you been.? damn bro i need the right handlebar (because mine is bent) let me know if they don't sell. I am a definite buyer, ill take both of them off you. area code 19020 (just for shipping info, lol) and i see you have a CBR600rr now? nice. __________________________________________________ 249cc FTW..!

March 31st, 2012, 11:45 AM	#2
Shikari99 ninjette.org member Name: Shikari Location: NJ Join Date: Jun 2011 Motorcycle(s): 11' 250R Posts: 27	Interested in a bar end and screw. Are they in clean condition?

March 31st, 2012, 01:02 PM	#3
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	Rear turn signals are identical to front signals except for lead length, which can usually be salvaged from the old signal. Just flip them so the drainage hole faces down.

March 31st, 2012, 05:44 PM	#5
Shikari99 ninjette.org member Name: Shikari Location: NJ Join Date: Jun 2011 Motorcycle(s): 11' 250R Posts: 27	If its no trouble and you dont mind I'm definitely interested in them. Thanks!

March 31st, 2012, 05:52 PM	#6
choneofakind ninjette.org certified postwhore Name: . Location: . Join Date: Feb 2011 Motorcycle(s): . Posts: Too much. MOTM - Feb '13, Feb '14	Eric, I'm assuming you're trying to make up as much money as possible on the wreck? Put the rear shock up for sale. You'll get some interest from pregen riders. Pull the carbs and sell those as well. People are always looking for slides/carbs that are good.

March 31st, 2012, 06:30 PM	#8
choneofakind ninjette.org certified postwhore Name: . Location: . Join Date: Feb 2011 Motorcycle(s): . Posts: Too much. MOTM - Feb '13, Feb '14	Oh nevermind then. Hahaha I would have just taken that off before the insurance guys picked it up

April 8th, 2012, 01:38 PM	#10
rz3r0 ninjette.org member Name: Rick Location: Hawaii Join Date: Aug 2011 Motorcycle(s): 09 Kawasaki Ninja 250R(Sold), 11 Honda Ruckus, 12 Ducati Monster 696 ABS Posts: 145	Hey how much for this?

April 10th, 2012, 08:37 PM	#11
leed ninjette.org sage Name: David Location: Loves Park, IL Join Date: Feb 2011 Motorcycle(s): Time will tell Posts: 969	If abhijitz doesn't end up buying, let me know how much you'd want for the Levers to 27606. Debating on this or two-wheels (but shipping time..).

April 27th, 2012, 08:39 PM	#16
whylton ninjette.org member Name: Warren Location: San Antonio, TX Join Date: Apr 2012 Motorcycle(s): 2008 Ninja 250R Posts: 13	Just checking but if the left handle bar or turn signal is available I'd definitely be a buyer. Let me know.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP! 2009 Stock Parts Value?	ladyrocket	Motorcycle-related	3	April 14th, 2013 05:59 PM
A Few 2010 stock parts	NathanUc	Motorcycle-related	2	May 30th, 2012 01:27 AM
FS: OEM stock parts for 08 and up	Shaol1n Monk	Motorcycle-related	0	July 5th, 2011 09:26 AM
Looking for stock parts (08+)	KTRacing38	Items Wanted	6	September 6th, 2010 12:05 AM
Looking for a few stock parts used	jeffwessel	Items Wanted	9	April 13th, 2009 11:42 AM