ninjette.org

Go Back   ninjette.org > 2008 - 2012 Ninja 250R > 2008 - 2012 Ninja 250R Tech Talk

Notices

Reply
 
Thread Tools
Old April 23rd, 2022, 11:08 AM   #1721
NPHendo42
ninjette.org newbie
 
Name: Neal
Location: Santa Cruz
Join Date: Apr 2022

Motorcycle(s): 2012 ninja 250r

Posts: 4
I'm sorry if this is a little off topic or if there is another thread for this info. I'm looking for the A2L and CAL file to run the ecotrons software for the Gen 2 efi kit. 2012 ninja 250. Tried contacting them directly and I'm not too happy with their support, or lack thereof.
NPHendo42 is offline   Reply With Quote




Old May 6th, 2022, 05:22 PM   #1722
jcgss77
Its not a 250,its a Ninja
 
jcgss77's Avatar
 
Name: Shaun
Location: Little Rock, AR
Join Date: Jun 2012

Motorcycle(s): '12 Ninja Kaw, '22 CFMOTO 300NK

Posts: 275
Quote:
Originally Posted by NPHendo42 View Post
I'm sorry if this is a little off topic or if there is another thread for this info. I'm looking for the A2L and CAL file to run the ecotrons software for the Gen 2 efi kit. 2012 ninja 250. Tried contacting them directly and I'm not too happy with their support, or lack thereof.
Does this get you what you need?

forgive me please if you already saw this page.
jcgss77 is offline   Reply With Quote


Old May 7th, 2022, 12:48 PM   #1723
NPHendo42
ninjette.org newbie
 
Name: Neal
Location: Santa Cruz
Join Date: Apr 2022

Motorcycle(s): 2012 ninja 250r

Posts: 4
No, but thanks for replying! I have since got the files I needed to connect the laptop to the ecu thankfully.
NPHendo42 is offline   Reply With Quote


Old May 7th, 2022, 07:05 PM   #1724
jcgss77
Its not a 250,its a Ninja
 
jcgss77's Avatar
 
Name: Shaun
Location: Little Rock, AR
Join Date: Jun 2012

Motorcycle(s): '12 Ninja Kaw, '22 CFMOTO 300NK

Posts: 275
Quote:
Originally Posted by NPHendo42 View Post
No, but thanks for replying! I have since got the files I needed to connect the laptop to the ecu thankfully.
Did Ecotrons contact you with the info?
jcgss77 is offline   Reply With Quote


Old May 8th, 2022, 12:09 AM   #1725
NPHendo42
ninjette.org newbie
 
Name: Neal
Location: Santa Cruz
Join Date: Apr 2022

Motorcycle(s): 2012 ninja 250r

Posts: 4
Quote:
Originally Posted by jcgss77 View Post
Did Ecotrons contact you with the info?
Pretty much. I got the files I needed to connect to the ecu to the laptop. It was weird. I had it running pretty good. Idle was hunting, but I was able to ride it fine. Then one day I just lost crank signal all of a sudden. Wouldnt start. Replaced the crank sensor and stator. Still wouldn't fire. Then I finally got the files. Got it to connect, and cranked it just to see if I could see signal on the laptop and it miraculously fired. Not sure why I lost signal.
NPHendo42 is offline   Reply With Quote


Old May 8th, 2022, 09:34 PM   #1726
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
The Ecotrons ECU randomly loses its memory and settings. Have to reload the files to restore functionality. Search for other's reports, you're not 1st or only one with this issue.
DannoXYZ is offline   Reply With Quote


Old May 18th, 2022, 05:12 PM   #1727
Ceeloo Yello
ninjette.org guru
 
Name: C
Location: Hawaii
Join Date: May 2011

Motorcycle(s): 250

Posts: 472
Can anyone tell me if there is an easy way to tell which connector is for injector 1 & injector 2 as they are no longer marked and have the same color coded wires?
__________________________________________________
"It ended up being the loose nut behind the wheel"
Ceeloo Yello is offline   Reply With Quote


Old May 18th, 2022, 10:56 PM   #1728
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Shouldn't matter as they're not sequentially fired anyway. Unless you added cam-sensor?
DannoXYZ is offline   Reply With Quote


Old May 19th, 2022, 10:52 AM   #1729
Ceeloo Yello
ninjette.org guru
 
Name: C
Location: Hawaii
Join Date: May 2011

Motorcycle(s): 250

Posts: 472
According to this thread it tunes each cylinder individually so I think it does matter.
I guess worse come to worse I have a 50/50 chance.
__________________________________________________
"It ended up being the loose nut behind the wheel"
Ceeloo Yello is offline   Reply With Quote


Old May 19th, 2022, 12:51 PM   #1730
Ceeloo Yello
ninjette.org guru
 
Name: C
Location: Hawaii
Join Date: May 2011

Motorcycle(s): 250

Posts: 472
Found the answer in a newer version of the manual than I had:
Pin 15 = Inj2 and Pin 16 = Inj1.
__________________________________________________
"It ended up being the loose nut behind the wheel"
Ceeloo Yello is offline   Reply With Quote


Old May 23rd, 2022, 11:51 AM   #1731
Ceeloo Yello
ninjette.org guru
 
Name: C
Location: Hawaii
Join Date: May 2011

Motorcycle(s): 250

Posts: 472
Do they even make 3/16" Fuel injection hose for the return line?
__________________________________________________
"It ended up being the loose nut behind the wheel"
Ceeloo Yello is offline   Reply With Quote


Old May 29th, 2022, 05:40 PM   #1732
jcgss77
Its not a 250,its a Ninja
 
jcgss77's Avatar
 
Name: Shaun
Location: Little Rock, AR
Join Date: Jun 2012

Motorcycle(s): '12 Ninja Kaw, '22 CFMOTO 300NK

Posts: 275
Quote:
Originally Posted by Ceeloo Yello View Post
Do they even make 3/16" Fuel injection hose for the return line?
I have had no issues getting any of the lines needed for any of my projects at my Advance Auto. They cut hose to length, just be sure to specify for a fuel injection job up front. Customer service is a thing of the past...
jcgss77 is offline   Reply With Quote


Old May 31st, 2022, 02:17 PM   #1733
Ceeloo Yello
ninjette.org guru
 
Name: C
Location: Hawaii
Join Date: May 2011

Motorcycle(s): 250

Posts: 472
Thanks for the reply, I'll see if there are any in Honolulu.
__________________________________________________
"It ended up being the loose nut behind the wheel"
Ceeloo Yello is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
ecotrons tech questions. bigbadbob 1986 - 2007 Ninja 250R Tech Talk 1 April 17th, 2015 10:50 AM
Ecotrons map swarfman64 2008 - 2012 Ninja 250R Tech Talk 2 January 15th, 2015 06:09 AM
WTB:Ecotrons petcock crimsondragon Items Wanted 2 September 21st, 2014 06:54 AM
Ecotrons kit garth285 Items Wanted 0 June 17th, 2014 05:09 PM
Ecotrons Gen2 FI Kit Install Terminal 1986 - 2007 Ninja 250R Tech Talk 85 October 15th, 2012 02:02 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 05:29 AM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.