September 28th, 2011, 07:04 AM | #1 |
ninjette.org member
Name: Patrick
Location: Alabama
Join Date: Aug 2011 Motorcycle(s): 09 black 250 Posts: 41
|
need some quick help - decal removal
I found a good deal on a bike close by however the bike has a decal kit on it with some lettering and numbers(he's a michael jordan fan apparently) Is it a problem getting decals off of a bike. The guy said they should come up fine but I thought I would throw it out there to see if any of you have had any experience in removing decals and how it went for you. The bike is black by the way if that matters
|
|
September 28th, 2011, 07:33 AM | #2 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
First make sure he is not covering body damage with those decals. Other than that there is a few different ways to get them off easily. Most say a heat gun or blow dryer will ease the removal. There is also some adhesive removers too that are easy on the finish if needed after removing the decals. GL!
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Quick Airbox removal question | forevertwowheels | 2008 - 2012 Ninja 250R Tech Talk | 11 | June 14th, 2011 04:31 PM |
decal removal | egb1108 | 2008 - 2012 Ninja 250R Farkles | 7 | June 12th, 2011 06:47 AM |
Quick question, spark plug removal | Ragnar1x | 1986 - 2007 Ninja 250R Tech Talk | 4 | April 21st, 2011 08:11 PM |
Quick Question About Snorkel Removal | LegB4Wicket | 2008 - 2012 Ninja 250R Tech Talk | 8 | December 11th, 2010 10:49 AM |
05 Ninja decal removal | ulfjr | 1986 - 2007 Ninja 250R Farkles | 10 | June 18th, 2009 06:09 PM |
|
|