CA Emissions removal

Olie · April 29th, 2014, 08:19 AM

After working on the carbs this weekend I realized my bike has all the CA crap on it. Seems to just clutter up everything. Anyone remove it along with the clean air stuff? Searched though the DIY section and didn't see anything on it.

alex.s · April 29th, 2014, 08:25 AM

it's common. useless weight imo

dino74 · April 29th, 2014, 09:41 AM

Quote:

Originally Posted by alex.s

... useless weight imo

Really? The air quality in the L.A. basin was horrible in the 80s.

Thirty years later despite more people and cars the air quality has improved drastically.

I wouldn't say its useless weight.

KrazyWalle · April 29th, 2014, 10:19 AM

I have everything removed. You just need to plug a vacuum line off the left carb, one of the tank lines, remove the one line to the air box. Also pull the canister thing get a crank case filter and the emission block of plate for the eng valve cover.. I did it a while ago so memory is vague. Just search for the Ca. emissions diagram and remove it ALL!

alex.s · April 29th, 2014, 10:29 AM

Quote:

Originally Posted by dino74

Really? The air quality in the L.A. basin was horrible in the 80s.

Thirty years later despite more people and cars the air quality has improved drastically.

I wouldn't say its useless weight.

1) he lives in hawaii
2) it's a 250. even with no emission control and a horrible tune its not putting that much out.

Olie · April 29th, 2014, 11:07 AM

Thanks everyone for the input. I will be tackling this in the next week or so. I'll try and take lots of pics and maybe put up a DIY. I need to pull the carbs too to clean them and check jet sizes so might at well punch it all out at once. If anyone knows of a DIY, please post it up.

fishdip · April 29th, 2014, 12:10 PM

Quote:

Originally Posted by Olie

Thanks everyone for the input. I will be tackling this in the next week or so. I'll try and take lots of pics and maybe put up a DIY. I need to pull the carbs too to clean them and check jet sizes so might at well punch it all out at once. If anyone knows of a DIY, please post it up.

http://faq.ninja250.org/wiki/Main_Page

alex.s · April 29th, 2014, 12:46 PM

Quote:

Originally Posted by fishdip

http://faq.ninja250.org/wiki/Main_Page

wrong website.

fishdip · April 29th, 2014, 12:49 PM

Quote:

Originally Posted by alex.s

wrong website.

and why is that? it is the only website that covers the ninja 250 the best.

alex.s · April 29th, 2014, 12:58 PM

Quote:

Originally Posted by fishdip

and why is that? it is the only website that covers the ninja 250 the best.

its a pregen website. op has newgen.

fishdip · April 29th, 2014, 01:03 PM

Quote:

Originally Posted by alex.s

its a pregen website. op has newgen.

Umm it has it http://faq.ninja250.org/wiki/2008_(and_up)_EX250J_Info

alex.s · April 29th, 2014, 01:41 PM

Quote:

Originally Posted by fishdip

Umm it has it http://faq.ninja250.org/wiki/2008_(and_up)_EX250J_Info

looks pretty ****** to me compared to the newgen specific wiki on this page.

alex.s · April 29th, 2014, 01:42 PM

Quote:

Originally Posted by fishdip

Umm it has it http://faq.ninja250.org/wiki/2008_(and_up)_EX250J_Info

notice how it has no emission control removal instructions there?

but its better, right?

broilmebk · April 29th, 2014, 02:48 PM

We're talking about the Kleen air system right?

mrudich · April 29th, 2014, 02:54 PM

I have a pregen and I was wondering if there are any pros or cons to removing or leaving it on.

Is there a reason to take it off?
Is there a reason to leave it on?

Thanks!

broilmebk · April 29th, 2014, 02:56 PM

Quote:

Originally Posted by mrudich

I have a pregen and I was wondering if there are any pros or cons to removing or leaving it on.

Is there a reason to take it off?
Is there a reason to leave it on?

Thanks!

Quote:

Originally Posted by broilmebk

We're talking about the Kleen air system right?

mrudich · April 29th, 2014, 02:58 PM

I'm talking about the pregen equivalent of the CA Emission thingy. I just hear of people removing the CA Emission thingy and I've been wondering if there's a reason.

alex.s · April 29th, 2014, 03:01 PM

did the pregen even have emission controls?

broilmebk · April 29th, 2014, 03:04 PM

^Actually, yea I was wondering the same thing after I posted that.

Quote:

Originally Posted by mrudich

I'm talking about the pregen equivalent of the CA Emission thingy. I just hear of people removing the CA Emission thingy and I've been wondering if there's a reason.

If you click the link it says at the beginning what it is and why people remove it. If the pregen has one, it should do the same thing?

BoBO · April 30th, 2014, 10:39 PM

Quote:

Originally Posted by Olie

After working on the carbs this weekend I realized my bike has all the CA crap on it. Seems to just clutter up everything. Anyone remove it along with the clean air stuff? Searched though the DIY section and didn't see anything on it.

My 08 250 had a few missing emission parts, when I bought it. The P.O. did plug the chimney,however, it looked messy. The smog block off plate made it look cleaner. I did help reduce most of the backfire, if you upgraded to a slip-on or full exhaust. On top of the weight reduction.

April 29th, 2014, 08:19 AM	#1
Olie New Old Guy Name: Olie Location: Oahu, Hawaii Join Date: Mar 2014 Motorcycle(s): 2011 250R SE Posts: 57 Blog Entries: 1	CA Emissions removal After working on the carbs this weekend I realized my bike has all the CA crap on it. Seems to just clutter up everything. Anyone remove it along with the clean air stuff? Searched though the DIY section and didn't see anything on it.

April 29th, 2014, 08:25 AM	#2
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	it's common. useless weight imo __________________________________________________

April 29th, 2014, 10:19 AM	#4
KrazyWalle ninjette.org member Name: oswaldo Location: Clarksville,Tn Join Date: Jun 2013 Motorcycle(s): 2010 Kawasaki Ninja 250R (Passion Red, Ca Model) Posts: 107	I have everything removed. You just need to plug a vacuum line off the left carb, one of the tank lines, remove the one line to the air box. Also pull the canister thing get a crank case filter and the emission block of plate for the eng valve cover.. I did it a while ago so memory is vague. Just search for the Ca. emissions diagram and remove it ALL! __________________________________________________ I would be rich by now if I had a dollar for every person that has told me "You need to upgrade, You need a bigger bike, You need more power..."

April 29th, 2014, 03:01 PM	#18
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	did the pregen even have emission controls? __________________________________________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Airbox removal + Kleen air removal?	MikeBudd	2008 - 2012 Ninja 250R Tech Talk	6	February 16th, 2012 04:57 PM
California Emissions Removal	Bo0stZomb13	2008 - 2012 Ninja 250R Tech Talk	3	May 6th, 2011 02:39 PM
California Emissions Removal	SdSy675	2008 - 2012 Ninja 250R Tech Talk	1	April 19th, 2011 12:27 PM
CA Emissions Removal question (carb parts)	CynicalC	1986 - 2007 Ninja 250R Tech Talk	6	March 17th, 2011 09:18 AM
thoughts on emissions removal	speedgsx98	1986 - 2007 Ninja 250R Tech Talk	8	July 14th, 2009 07:33 AM

April 29th, 2014, 11:07 AM	#6
Olie New Old Guy Name: Olie Location: Oahu, Hawaii Join Date: Mar 2014 Motorcycle(s): 2011 250R SE Posts: 57 Blog Entries: 1	Thanks everyone for the input. I will be tackling this in the next week or so. I'll try and take lots of pics and maybe put up a DIY. I need to pull the carbs too to clean them and check jet sizes so might at well punch it all out at once. If anyone knows of a DIY, please post it up.

April 29th, 2014, 02:48 PM	#14
broilmebk ninjette.org sage Name: Brian Location: Orange County, CA Join Date: Apr 2012 Motorcycle(s): '12 ninja 250r Posts: 762	We're talking about the Kleen air system right?

April 29th, 2014, 02:54 PM	#15
mrudich ninjette.org member Name: Mateo Location: Mendocino County Join Date: Mar 2014 Motorcycle(s): 2005 Kawasaki Ninja 250 Posts: 82	I have a pregen and I was wondering if there are any pros or cons to removing or leaving it on. Is there a reason to take it off? Is there a reason to leave it on? Thanks!

April 29th, 2014, 02:58 PM	#17
mrudich ninjette.org member Name: Mateo Location: Mendocino County Join Date: Mar 2014 Motorcycle(s): 2005 Kawasaki Ninja 250 Posts: 82	I'm talking about the pregen equivalent of the CA Emission thingy. I just hear of people removing the CA Emission thingy and I've been wondering if there's a reason.