ninjette.org

Go Back   ninjette.org > 2008 - 2012 Ninja 250R > 2008 - 2012 Ninja 250R Tech Talk

Notices

Reply
 
Thread Tools
Old April 12th, 2013, 12:49 PM   #1
DaBlue1
Long Time Rider
 
DaBlue1's Avatar
 
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010

Motorcycle(s): 2009 Kawasaki Ninja 250R

Posts: A lot.
Review: Hurricane Racing Performance Air Filter for the ’08-’12 Ninja 250

A few weeks ago, I received an email from Hurricane Racing Co. Ltd. about their new air filters. Here is a small excerpt from the email.

"....The difference between our filters and other brands is that we are using stainless steel as a filter medium. The steel we use is high grade SUS-304 from Japan, to produce the finest steel mesh on the market. It has the advantage over cotton as being less tedious to maintain; it can be pressure washed, blow dried and replaced without the need of any specialist products or oiling. Thus, making it truly a simple to maintain, lifetime filter.

Our Ninja filters have become very popular under our Hurricane main brand in South-East Asia, but also especially in Indonesia, under our Ferrox brand. You may find some good feedback and comments already from the Indonesian web forums.

I have attached pictures of our 250 panel, open pod and also our new 650 filter, just for your references. You may also be potentially interested in distributing our Ninja filters, as we currently have non in the US. The RRP for each filter is listed below (side note: our cotton filter price is also listed, as we can produce these, similar to K&N - the price is there for comparison).
Kind regards,


scott@hurricanerp.com
Hurricane Racing Co. Ltd.



I had been talking with Scott about theses filters. He saw a review I had done before and offered a free filter, if I wanted to do a test and review. So, I took him up on the offer.

Today on the way out the door to pick up a few other parts for the bike, I was greeted by the mailman with a package. It was a panel filter for the Ninja 250 from Hurricane Performance. The filter came in a nicely packaged box with a few little goodies and instructions from Hurricane Racing Performance.

Quality, Finish and Fit

Right away you can tell this is a quality made filter. Sturdy, clean lines and well put together. The filtering medium is a pleated, fine stainless steel mesh, bordered by rubber like the K&N 2508 panel filter, but cleaner and smoother, slightly wedge shaped with a small bump to pull on. This filter was a little heavier than the foam Pipercross Air Filter I pulled out, of course. The first thing I did was look right at and through the filter. I could see through the other side and was even able to take a picture with my camera phone. What was interesting was even though I could see through it, the holes in the mesh were amazingly tiny, even smaller than the pores on my foam Pipercross Air Filter. The more I looked at it the more I liked it. My opinion is that, this filter is definitely built for the racing circuit although street application could be possible if you don’t live in a real dirty and dusty environment. Then again some tracks are pretty dirty too.

After having a good look at it, it was time to install it. The install was perfect, quick, smooth and snug, no grease needed to coax it into the air box or seal the edges. No swapping of the filter frame or oiling is required for this filter. (According to the instructions provided by Hurricane, you simply can blow it clean, wash it and dry it.) The cover went on without any pushing.

Performance

The bike I’m testing the filter in, is a slightly modified (shimmed w/ two washers (1.53mm), stock 98 main jets, snorkel removed, Iridium Spark Plugs) 2009 Ninja 250R with 22,000 + miles. Start up was normal and warm up was the same. The temp was 70 degrees with 45% humidity. Throttle inputs while idling seemed fine, however I did notice the idle was a tad smoother (although a number of factors can contribute to that). I purposely rode up the street past the landscapers that were blowing dirt and grass to see if I could collect some of it driving by. During the 4 years I’ve had may bike, the air filter has not really gotten extremely dirty. The dirtiest filter has been the stock filter, with the Pipercross it’s been mainly a few big leaves here and there and a little dust in the corner of the filter.

Out on the main road for a quick ride, I can tell by the intake and exhaust note that a little more air is flowing. I also noticed it in the difference in smell of the exhaust while warming up. It was not as rich smelling. Throttle response was good between 3-6 k RPMS. I’ll probably take it out again tonight on the hwy to open it up a little. I will update this review over the next few weeks with more information and findings.

This filter will also fit the 300 Ninja.
Attached Images
File Type: jpg Hurricane Filter.JPG (68.7 KB, 42 views)
File Type: jpg Hurricane Filter(2).JPG (123.9 KB, 47 views)
File Type: jpg Hurricane Filter(3).JPG (142.9 KB, 36 views)
File Type: jpg Hurricane Filter(4).JPG (70.9 KB, 50 views)

Last futzed with by DaBlue1; May 18th, 2013 at 04:18 AM.
DaBlue1 is offline   Reply With Quote




Old April 12th, 2013, 12:58 PM   #2
Alex
ninjette.org dude
 
Alex's Avatar
 
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008

Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE, '15 CRF110F, '13 TT-R50E

Posts: Too much.
Blog Entries: 7
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org

ninjette.org Terms of Service

Shopping for motorcycle parts or equipment? Come here first.

The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered)
Alex is offline   Reply With Quote


Old April 13th, 2013, 03:47 PM   #3
HotRedTurbo
ninjette.org member
 
HotRedTurbo's Avatar
 
Name: Jesus
Location: Orlando, FL
Join Date: Aug 2012

Motorcycle(s): 2008 Ninja 250r, 2003 GSX R600

Posts: 64
Nice info! I think it's pretty cool and would like to see some dyno runs vs stock as a reference with A/F readings.

I'll even volunteer for that! Lol I know the Indonesians love their 250 racing and don’t doubt that this would be quality product. I will be keeping up with this thread for updates on your review. I appreciate your time for doing this.
HotRedTurbo is offline   Reply With Quote


Old April 18th, 2013, 10:18 PM   #4
DaBlue1
Long Time Rider
 
DaBlue1's Avatar
 
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010

Motorcycle(s): 2009 Kawasaki Ninja 250R

Posts: A lot.
Review Update: Hurricane Racing Performance Air Filter

UPDATE:

After having this new filter from Hurricane Performance Racing for the past week, I must say that I’m impressed, not only by its design but also by how it has changed the character of the bike’s engine.

But before I get into all the real good stuff, allow me to explain what this filter is. Like stated earlier in the review, the filtering medium is a pleated, fine stainless steel mesh, bordered by what seems to be a good silicone rubber. The mesh is fine high grade SUS-304 stainless steel. What is SUS- 304 stainless steel? Basically, (SUS) stands for System Usability Scale and 304 is the number of micro holes in a linear inch. Each hole is approx 45 microns in size (as a point of reference, a human hair follicle is approximately 50 microns in diameter, plant pollen about 40 microns). The materials and construction of this filter makes it very sturdy. The mesh is pleated and held in place in a way that makes it incompressible under suction (unlike my foam filters). As a note this came from Thailand, so the testing standards for air filtration are different than they are here in the U.S.

The maker of this filter does not make any claims of better filtration with this filter (neither do I), however they do claim higher airflow as well as several other things.

So that this review does not turn into a big debate about what type of filter is better (paper, cotton gauze or foam), I will simply say, it was hard to find a real concrete definitive answer. One very popular filter manufacturer had this to say about airflow and filtration,

“ We design our air filters to provide superior filtration of the contaminants that can harm your engine while maximizing the airflow characteristics of the filter in question. The ability of an air filter to protect your engine is generally measured in accordance with testing procedure ISO 5011. We subject a sample of our filter designs to this test procedure using Coarse Test Dust, which includes particles ranging in size from less than 5.5 microns to 176 microns. As a point of reference, a human hair is approximately 50 microns in diameter.

Doesn't higher filtration mean a better air filter?

No. The quality of an air filter can only be judged by reviewing all four important characteristics. 1) Restriction while loading with dust; 2) Filtration efficiency as a percentage; 3) Dust holding capacity before the filter needs cleaning or replacement ; and 4) filter life. Any company designing an air filter must make choices about these four characteristics and how their filter will perform in each area. Generally speaking, each characteristic of an air filter has an inverse relationship to at least one of the others, meaning, as filtration efficiency goes up, restriction increases and capacity or service life decreases. So an air filter manufacturer can design an air filter to have ultra high filtration efficiency by compromising the filters restriction, capacity, and/or service life…. So the basic answer to the original question is that higher filtration is not necessarily a good thing when it comes at the expense of restriction, reusability and/or capacity. While the benefits of a filter with 99.9% filtration are unknown, the benefits of low restriction are measurable and clear. Low restriction helps an engine perform more efficiently generating more power and torque.

That would lead a reasonable person to ask what then is a safe level of filtration. This question is literally unanswered. Minimum air filter specifications are generally not called out in vehicle owners' manuals, nor will you find much published information on air filtration requirements from vehicle manufacturers. We have never seen a scientific study concluding what levels of filtration efficiency correspond to various levels of engine wear.
The fact is that an engine is not a pristine environment. Fuel enters after passing through a fuel filter, combines with air which is ignited to explode in a pressurized chamber. The combustion is not 100% efficient and leaves residues behind that must be flushed from the engine. Engines have tolerances or measured gaps between surface areas. While there are few if any studies on engine wear, it would seem reasonable to speculate that particles less than 5.5 microns create little engine wear unless ingested at very high levels of concentration. As support for this theory, consider the filtration levels provided by fuel filters and oil filters that sometimes tout their ability to filter particles above 10 or 20 microns.

If you really want to compare two air filters, you need to know all four characteristics mentioned above. Consumers can then choose what matters most to them. But comparing two air filters with only one piece of information is like saying a bicycle is better than a car based solely on a comparison of mileage. Yes the mileage is better, but a car has a few other benefits (speed, comfort, keeps you dry in wet weather) that just may offset the mileage disadvantage.

More airflow means you are letting more dirt through, right?

No. Filtration testing measures the percentage of dust retained before the filter reaches a terminal test pressure, often 10" of restriction above initial restriction. We use airflow as a simplified term to explain a more complicated physical process. The more precise description is restriction: *** air filters create less restriction which helps an engine run better. An engine will only use the air it needs and our air filters do not result in an engine using more air than necessary. Rather, they result in the engine experiencing less restriction. The terms airflow and restriction are inversely related. Our air filters provide either less restriction at a fixed airflow rate; or more airflow as a fixed level of restriction. In neither case is more air being used than necessary.”


So what does all that mean? Here’s my take…, the engine will get some dirt in it no matter what, whether it is from the atmosphere, driving environment or the engine itself (in the form of carbon deposits), so there is a small possibility of engine wear. Choosing an air filter is a balancing act. Performance comes at the sake of a little extra filtration, a little extra filtration protection at the expense of a little more performance.

What’s the solution? Do what many lubricant manufacturers have emphasized for years, when driving conditions present a unique set of challenges for engine performance and durability; Preventative Maintenance. Frequent oil and filter changes as well as air filter cleaning or replacement is the best way to prevent engine wear.

Hurricane Performance Racing Stainless Steel Mesh Air Filter

Now the good stuff.

This is a really, nice filter. It definitely has changed the way the engine operates. The engine feels like it’s turning with less effort and has smoothed out. The exhaust note has changed a little, the intake is not as grumbly as before in the low rpm range, but when you open the throttle up it sounds great. This is probably from the airflow being more linear than turbulent. Without question, the filter allows more air to flow. A definite difference compared to the stock air filter and the Pipercross Air Filter I ran before.
Do I believe the AFR has leaned out too much? Naw. Smoothed out? Yeap.
She's still making plenty power up top.

I have 15/ 41 sprockets because I do a lot of hwy riding. Getting up to hwy speeds, the RPMs seem to run up quicker, nice acceleration for the set gear up, especially around ½ throttle. There does not seem to be a big increase in HP, but the HP feels like it is being made more efficiently. I haven’t had a chance to see if there has been a real change in mpg cause I’ve been wringing the throttle, but from what a can tell from running ethanol free gas, it’s not going to change that much.

As far as dirt goes, I’ve seen nothing yet except a little pollen around the rubber edge (the pollen is super heavy this week). I really don’t expect to see a lot anyway as my filter hardly gets that dirty. Am I concerned about any extra possible dirt? Nope. I’m going to keep my oil changed frequently like I’ve been doing and all the other maintenance required. I really want someone else to ride it, to tell me what they think. Maybe when Nemesis gets his filter, he’ll give his opinion on it as well.

Stay tuned more to come.
DaBlue1 is offline   Reply With Quote


Old May 17th, 2013, 07:00 PM   #5
HotRedTurbo
ninjette.org member
 
HotRedTurbo's Avatar
 
Name: Jesus
Location: Orlando, FL
Join Date: Aug 2012

Motorcycle(s): 2008 Ninja 250r, 2003 GSX R600

Posts: 64
Anything new on this? I sent an email to Scott but it was returned saying, "Delivery is delayed to these recipients or groups:" Not sure what all that is about but if you can help me contact him, I would appreciate it.

Thanks.
__________________________________________________
CCS AM#818 Equipment:XTracing, Tyga Performance, Bridgestone, Hotbodies Bodywork, Pitbull, Woodcraft
HotRedTurbo is offline   Reply With Quote


Old May 18th, 2013, 04:32 AM   #6
DaBlue1
Long Time Rider
 
DaBlue1's Avatar
 
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010

Motorcycle(s): 2009 Kawasaki Ninja 250R

Posts: A lot.
Quote:
Originally Posted by HotRedTurbo View Post
Anything new on this? I sent an email to Scott but it was returned saying, "Delivery is delayed to these recipients or groups:" Not sure what all that is about but if you can help me contact him, I would appreciate it.

Thanks.
I got a e-mail from him yesterday. I'm not sure if they may have some internal mail problems or not. A couple of others have contacted him recently about orders.

There are no real new developments from me right now. The filter is working great. The weather has gotten warmer, so I've been riding more often. I've been monitoring the gas mileage, which so far has changed a very little bit, but it was kind of expected. The filters are available and on sale on the Hurricane Racing Performance website. The filters take about a week or two for delivery.
DaBlue1 is offline   Reply With Quote


1 out of 1 members found this post helpful.
Old May 18th, 2013, 12:49 PM   #7
HotRedTurbo
ninjette.org member
 
HotRedTurbo's Avatar
 
Name: Jesus
Location: Orlando, FL
Join Date: Aug 2012

Motorcycle(s): 2008 Ninja 250r, 2003 GSX R600

Posts: 64
OK thanks.
__________________________________________________
CCS AM#818 Equipment:XTracing, Tyga Performance, Bridgestone, Hotbodies Bodywork, Pitbull, Woodcraft
HotRedTurbo is offline   Reply With Quote


Old December 19th, 2013, 09:52 AM   #8
DaBlue1
Long Time Rider
 
DaBlue1's Avatar
 
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010

Motorcycle(s): 2009 Kawasaki Ninja 250R

Posts: A lot.
Update:

So it's been a little while since I posted anything on this filter. The bike ran exceptional for the whole riding season. (for me that's until the temps get in the 50's and below)

I kept the filter in the bike approx 7 months & 1860 miles. The Mobil 1 oil in the bike was in it for 2630 miles (which was double the amount of miles I normally change my oil).

Looking at the oil that was drained, it was not any darker or dirtier than normal oil changes and the oil filter element looked liked every other one I've changed over the years. Because the Hurricane air filter flows so much more air, filtration may be a concern for some, so oil becomes an indicator if more than normal levels of dirt is entering the engine. I for one don't live in a overly dusty area, so I was not too concern with really high levels of dirt and dust. IMHO, For someone else in a dirty area, this may be a issue.

Having a look at the airbox and the air filter, I noticed the filter collected some rather fine dust particle in the exact same far left hand corner just like the other filters have. The tiny bit of residual filter oil from the previous filter that had gotten on some small areas also had trapped dust.

Overall, I loved the performance of the bike with Hurricane Air Filter, but I like the Pipercross Air Filter too. Chances are is I'll run the Hurricane in the summer when the bike runs a little richer and the Pipercross I'll run in the winter when the lower temps allow the bike to run a little leaner than normal.
Attached Images
File Type: jpg DSCF0106.jpg (190.9 KB, 6 views)
File Type: jpg DSCF0109.jpg (180.5 KB, 7 views)
File Type: jpg DSCF0110.jpg (176.5 KB, 9 views)
File Type: jpg DSCF0104.jpg (73.7 KB, 6 views)
DaBlue1 is offline   Reply With Quote


Old December 19th, 2013, 04:05 PM   #9
JohnnyBravo
Certifiable nontundrum
 
JohnnyBravo's Avatar
 
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013

Motorcycle(s): 2013 SE NINJA 300

Posts: Too much.
MOTM - Sep '13, Sep '16
That's a heck of a review... Thanks
__________________________________________________
JohnnyBravo is offline   Reply With Quote


Old December 20th, 2013, 11:06 AM   #10
Bones85
ninjette.org member
 
Name: Joe
Location: Florida
Join Date: Jan 2013

Motorcycle(s): 2009 Ninja 250R

Posts: 206
You change your oil every ~1300 miles?
Bones85 is offline   Reply With Quote


Old December 20th, 2013, 11:54 AM   #11
JohnnyBravo
Certifiable nontundrum
 
JohnnyBravo's Avatar
 
Name: Harper
Location: NC Milkshake stand
Join Date: Mar 2013

Motorcycle(s): 2013 SE NINJA 300

Posts: Too much.
MOTM - Sep '13, Sep '16
Quote:
Originally Posted by Bones85 View Post
You change your oil every ~1300 miles?
I normally change mine at 1500... Clean oil is happy oil
__________________________________________________
JohnnyBravo is offline   Reply With Quote


Old December 20th, 2013, 05:26 PM   #12
DaBlue1
Long Time Rider
 
DaBlue1's Avatar
 
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010

Motorcycle(s): 2009 Kawasaki Ninja 250R

Posts: A lot.
Quote:
Originally Posted by Bones85 View Post
You change your oil every ~1300 miles?
Yes, that's about my avg. since I bought the bike new in "09. A few times I went a little longer than 1300, but not by much. I currently have 24,345 miles on the bike.
DaBlue1 is offline   Reply With Quote


Old February 19th, 2014, 09:41 AM   #13
mataleo
ninjette.org member
 
mataleo's Avatar
 
Name: Krystian
Location: Pattaya
Join Date: Dec 2013

Motorcycle(s): Ninja 300 SE

Posts: 27
i changed to DNA filter today

price decided

i can recommend it too

bike feels much better

http://www.dnafilters.com/en/compone...13%27&catid=65
__________________________________________________
http://www.fuelly.com/driver/mataleo/ninja-300-1
mataleo is offline   Reply With Quote


Old March 19th, 2014, 09:35 PM   #14
LoD575
ninjette.org sage
 
LoD575's Avatar
 
Name: Steve
Location: Valdosta GA, US
Join Date: Jul 2011

Motorcycle(s): 2012 Ninja 250, 2006 Ninja ZX6R-636

Posts: 661
I use a Hurricane filter as well. It is a solid product which should last a long time. Prior to this filter I was using a Pipercross which is another solid product.
LoD575 is offline   Reply With Quote


Old March 20th, 2014, 04:57 AM   #15
DaBlue1
Long Time Rider
 
DaBlue1's Avatar
 
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010

Motorcycle(s): 2009 Kawasaki Ninja 250R

Posts: A lot.
Quote:
Originally Posted by LoD575 View Post
I use a Hurricane filter as well. It is a solid product which should last a long time. Prior to this filter I was using a Pipercross which is another solid product.
Any performance changes for you?
DaBlue1 is offline   Reply With Quote


Old March 20th, 2014, 05:15 AM   #16
LoD575
ninjette.org sage
 
LoD575's Avatar
 
Name: Steve
Location: Valdosta GA, US
Join Date: Jul 2011

Motorcycle(s): 2012 Ninja 250, 2006 Ninja ZX6R-636

Posts: 661
I havent noticed any performance changes. I also moved from New Mexico to southern Georgia so any change was not noticable during the re-jetting process.
LoD575 is offline   Reply With Quote


Old March 20th, 2014, 06:22 AM   #17
DaBlue1
Long Time Rider
 
DaBlue1's Avatar
 
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010

Motorcycle(s): 2009 Kawasaki Ninja 250R

Posts: A lot.
Quote:
Originally Posted by LoD575 View Post
I haven't noticed any performance changes. I also moved from New Mexico to southern Georgia so any change was not noticeable during the re-jetting process.
Did you go back to the airbox or do you have the Hurricane Pod Filter? What size jets are you running now? Had a chance to run ethanol free 87 octane gas?
DaBlue1 is offline   Reply With Quote


Old March 21st, 2014, 04:48 PM   #18
LoD575
ninjette.org sage
 
LoD575's Avatar
 
Name: Steve
Location: Valdosta GA, US
Join Date: Jul 2011

Motorcycle(s): 2012 Ninja 250, 2006 Ninja ZX6R-636

Posts: 661
Was running a pod filter setup prior to the move. After the move I decided to put the airbox back in and used the Hurricane filter. Factory pro kit with current jet size of 100. I have only recently found a local station that offers ethanol free fuel but have yet to run a tank of it.

I am still playing around with the jet sizes and needle position.
LoD575 is offline   Reply With Quote


Old March 21st, 2014, 05:37 PM   #19
DaBlue1
Long Time Rider
 
DaBlue1's Avatar
 
Name: Blue
Location: Charlotte, NC
Join Date: Sep 2010

Motorcycle(s): 2009 Kawasaki Ninja 250R

Posts: A lot.
Quote:
Originally Posted by LoD575 View Post
Was running a pod filter setup prior to the move. After the move I decided to put the airbox back in and used the Hurricane filter. Factory pro kit with current jet size of 100. I have only recently found a local station that offers ethanol free fuel but have yet to run a tank of it.

I am still playing around with the jet sizes and needle position.
Do post your results when you get it figured out.
DaBlue1 is offline   Reply With Quote


Old April 16th, 2014, 12:14 PM   #20
Mjj
ninjette.org member
 
Name: Michael
Location: Wisconsin
Join Date: Mar 2013

Motorcycle(s): 2009 Ninja 250

Posts: 43
Just received my Hurricane filter in the mail. They were allegedly running some kind of special price on the website, so I jumped in. It was a strange transaction but the order was received in a bit more than a week. The odd part was I never received an email confirmation of any kind. It was a Pay-Pal transaction with a currency conversion from British Pounds to Dollars. Following up on the order, the customer service takes you to Thailand. I called the phone number, but no one picked up. To be fair I was probably calling at 4:00 AM...

Despite the lack of order feedback, the filter arrived in great condition and right on time.

I'll get it installed over the weekend. Looking forward to it. To confirm the previous reports, it looks like it was built to install in a mission critical situation. Impressive.
Mjj is offline   Reply With Quote


Old April 20th, 2014, 03:01 AM   #21
LoD575
ninjette.org sage
 
LoD575's Avatar
 
Name: Steve
Location: Valdosta GA, US
Join Date: Jul 2011

Motorcycle(s): 2012 Ninja 250, 2006 Ninja ZX6R-636

Posts: 661
Quote:
Originally Posted by DaBlue1 View Post
Do post your results when you get it figured out.
Have her dialed in now after some tuning. Ended up going to factory main and pilot jets with FP needles in 4th position.
Plugs are a nice caramelized tan color.

Back to running 93 octane with Sportisi BRT-TIS.
LoD575 is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
New Air Filter from Hurricane Racing for the Ninja 300 & 250R DaBlue1 2013 - 2017 Ninja 300 Farkles 8 March 25th, 2013 04:46 AM
K&N KA-2508 Kawasaki High Performance Replacement Air Filter - Anyone use this? dkstariob 2008 - 2012 Ninja 250R Tech Talk 7 April 12th, 2012 07:09 PM
FI Bike Remove Airbox or performance air filter menno 2008 - 2012 Ninja 250R Tech Talk 3 October 5th, 2010 02:01 PM
[webbikeworld.com] - K&N Air Filter Review Ninjette Newsbot Motorcycling News 0 March 26th, 2009 04:30 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 10:06 PM.


Website uptime monitoring Host-tracker.com
Powered by vBulletin®
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2022 ninjette.org, All rights reserved.