ninjette.org

Go Back   ninjette.org > 2008 - 2012 Ninja 250R > 2008 - 2012 Ninja 250R Tech Talk

Reply
 
Thread Tools
Old Today, 11:41 AM   #41
Turboninjaproject
ninjette.org member
 
Name: Matt
Location: Ontario Canada
Join Date: Feb 2020

Motorcycle(s): Ninja250r frankinbuild

Posts: 25
That did it I have a startup recording. Seems almost perfect. Now my temp was slow before so I moved it to the top of the head. Now itís worse gonna wait for it to cool and change it back to where I had it before and move my warm up temp down a bit to compensate. Almost back together. Thanks Dannoxyz might need more help dialing it in after a bit more once Iím together and can get on the road.
Turboninjaproject is offline   Reply With Quote




Old Today, 05:08 PM   #42
Turboninjaproject
ninjette.org member
 
Name: Matt
Location: Ontario Canada
Join Date: Feb 2020

Motorcycle(s): Ninja250r frankinbuild

Posts: 25
Hey Dannoxyz. This is the other half of the cal seems confusing but it worked for me. the way I needed to open was open the a2l file then in the window in procal that shows it their right click that a2l file and add cal use the first .cal file I sent then it should work and open. Alternatively theirs a calibration file itíself but Iíve never been able to get that to work once you have the a2l file loaded you can open other .cal files I assumed you had it. Had to post here canít send a file in private I donít think? I Put it back together and now it wouldnít start I think Iím doing to many things at once had turned the screws in another 3/14 after I ran it thinking it would help cold start. So I might just be able to raise the idle Iíll try again tomorrow seemed close before it just wouldnít come off warm up and I had no charge pipe for testing the idle it got annoying. so I moved the sensor back and lowered my temps in warm up same fueling just stoped it at 52 on the computer instead of 70 degrees. Gonna wait until tomorrow night and try again with a bit more idle
Attached Files
File Type: zip S28_H14_L46_Cr15_E5[2305843009214944585].zip (11.4 KB, 0 views)
Turboninjaproject is offline   Reply With Quote


Reply




Similar Threads
Thread Thread Starter Forum Replies Last Post
[RideApart] - KTM Unveils Fuel-Injected Two-Stroke Ninjette Newsbot Motorcycling News 0 May 18th, 2017 05:40 PM
Fuel Injected Ninja 250... FastrnU General Motorcycling Discussion 7 March 14th, 2013 04:37 PM
What performance mods can I do on a Fuel Injected 2010? Shaol1n Monk 2008 - 2012 Ninja 250R Tech Talk 26 September 10th, 2012 08:57 AM
Slip on exhaust on Fuel injected model loz944 2008 - 2012 Ninja 250R Tech Talk 6 January 24th, 2012 03:36 PM
4 minutes of sound, my Fuel Injected 2005 greg737 1986 - 2007 Ninja 250R Tech Talk 5 July 23rd, 2011 07:44 PM


Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Motorcycle Safety Foundation

All times are GMT -7. The time now is 10:23 PM.


remote server monitor
Powered by vBulletin®
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Except where otherwise noted, all site contents are © Copyright 2021 ninjette.org, All rights reserved.