July 29th, 2019, 01:45 PM | #1 |
Slow boi
Name: Dane
Location: 119 Creekwood Drive
Join Date: Jul 2019 Motorcycle(s): 2004 Ninja Ex250 Posts: 3
|
Installing the Belly fairing
Hey there fellow Ninjettes.
First time poster and I was looking for some advice on how I would go about installing the lower belly fairing. Now I know I need the belly bracket but my main question is where exactly does it go? I've been looking around where I think it would go and I can't find anywhere that looks like it would fasten and I can't find any info on it anywhere. I'm sure this may have been posted before and if it has I'm sorry but I could really use the help. Thanks -the brinkle |
|
July 29th, 2019, 02:20 PM | #2 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Hi and welcome to Ninjette.
Please post photo of bracket you have. Might not be correct one. |
|
July 30th, 2019, 08:47 PM | #3 |
Slow boi
Name: Dane
Location: 119 Creekwood Drive
Join Date: Jul 2019 Motorcycle(s): 2004 Ninja Ex250 Posts: 3
|
I believe this is it correct?
|
|
July 31st, 2019, 07:03 PM | #4 |
ninjette.org guru
Name: C
Location: Hawaii
Join Date: May 2011 Motorcycle(s): 250 Posts: 472
|
Looks to be one of the brackets required, take a look at the part diagram attached.
__________________________________________________
"It ended up being the loose nut behind the wheel" |
|
July 31st, 2019, 08:09 PM | #5 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
There’s actually THREE brackets required to mount lower fairing.
Left-rear one bolts onto frame just in front of kickstand. Right-rear bracket Front centre bracket bolts to bottom of radiator Your front bracket is broken with centre tab and nut missing. Simple enough to send to me and I’ll weld on tab and nut for cost of shipping. |
|
July 31st, 2019, 08:49 PM | #6 |
Slow boi
Name: Dane
Location: 119 Creekwood Drive
Join Date: Jul 2019 Motorcycle(s): 2004 Ninja Ex250 Posts: 3
|
Hey Danno thanks for the pictures that really clears some stuff up. I haven't actually bought the bracket yet but unless I can find one with the bolt on it I'll take you up on the offer. Thanks again everyone for the help!
|
|
July 31st, 2019, 08:56 PM | #7 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Do you have rear brackets? I may have complete set I’ll sell you.
Last futzed with by DannoXYZ; August 1st, 2019 at 01:21 AM. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
DIY for installing race fairing? | psych0hans | Ninjettes At Speed | 5 | April 16th, 2013 07:40 AM |
|
|