March 16th, 2013, 04:35 PM | #81 |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
Full quiet-long-core Carbon Fiber full system, FI Micro tuner
please |
|
March 18th, 2013, 09:24 AM | #82 |
Area P
Name: Kerry
Location: SoCal & South Florida
Join Date: Dec 2008 Motorcycle(s): Too many to list Posts: 439
|
Update - We are still working on some of the tooling/fixtures. Some of them are fairly complex and also require machining and heat treating. Many other components are completed. We are now projecting April 5th for the first production article to be check fit on all the new tooling. Then approximately two - three weeks after that for production systems to start becoming available.
As indicated on the first page annoucement - GB prices will be honored to everyone on the list at the end (31st). In addition, anyone who has a FI Micro Programmer ordered at that time, can opt to have it shipped prior to the exhaust systems. You would pay for that item only. The FI Micro Programmer will have free shipping applied within the lower 48 states to GB members. We will pre-load a base map for whatever your current set-up is in position 1. We will then load the appropriate Area P full system Map in position 2. |
|
March 18th, 2013, 10:56 AM | #83 |
ninjette.org member
Name: Non-ya
Location: Socal
Join Date: Mar 2013 Motorcycle(s): Tree Hundred Posts: 72
|
Sorry but I couldn't wait. Please remove me from the list.
|
|
March 18th, 2013, 11:52 AM | #84 |
ninjette.org member
Name: Carlos
Location: Puerto Rico
Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181
|
how many maps the tuner can store on them?3? 5?
|
|
March 18th, 2013, 04:53 PM | #85 |
Area P
Name: Kerry
Location: SoCal & South Florida
Join Date: Dec 2008 Motorcycle(s): Too many to list Posts: 439
|
|
|
March 19th, 2013, 05:49 PM | #86 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
|
|
March 19th, 2013, 05:52 PM | #87 | |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
Quote:
Yes for the 300, got you down. |
|
|
March 19th, 2013, 05:54 PM | #88 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
|
|
March 19th, 2013, 06:14 PM | #89 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
|
|
March 19th, 2013, 06:23 PM | #90 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
Updated list! Hand tight everyone, whats a few more weeks for the most power.
Group Buy 300
1.S1att3r-Full carbon fiber muffler, FI micro tuner, passenger peg delete 2.Surferboy120-Full carbon Fiber muffler with quiet core, passenger peg delete, standard end cap 3.ninjamunky85-full carbon fiber muffler, billet flat end cap, FI micro tuner 4.xtrapsi- Full quiet core 18” Carbon Fiber Muffler, billet flat end cap, micro tuner 5.ionized- Full quiet core 18" Carbon Fiber, no decal, Rear Peg removing bracket 6.Hatesneezing- Full quiet core 18” carbon fiber muffler, flat billet end cap, no decal, FI Micro tuner 7.vanman69- ultra high mount stainless, billet end-cap 8.Baja- Full quiet core 18” Carbon Fiber Muffler, flat billet end cap, no decal, "Slanted A" mounting bracket. FI Micro Programmer 9.Felo- Full quiet core 18” carbon fiber muffler, FI micro tuner, "Slanted A" Solo bracket 10.Stablgr- ultra high mount carbon fiber, FI micro tuner, billet end cap, no decal 11.Yakaru- Full quiet-long-core Carbon Fiber full system, FI Micro tuner 12.diwhiteii- Full Ultra High Mount System, Standard Carbon Fiber Muffler 13.joyspring- Accessory "Solo" Mounting Bracket, "Slanted A", FI Micro Programmer, Full Standard Mount System, Standard Carbon Fiber Muffler 14.allanoue- Full quiet-long-core Carbon Fiber full system, FI Micro tuner |
|
March 19th, 2013, 08:26 PM | #91 |
ninjette.org member
Name: Steve
Location: Oswego, NY
Join Date: Aug 2012 Motorcycle(s): 2013 White 300 Posts: 221
|
Ok lets do it.
Long quiet core carbon fiber muffler with billet flat encap Area P/Fuel Moto FI Micro Programmer |
|
March 19th, 2013, 08:37 PM | #92 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
|
|
March 19th, 2013, 08:40 PM | #93 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
Updated list!
Group Buy 300
1.S1att3r-Full carbon fiber muffler, FI micro tuner, passenger peg delete 2.Surferboy120-Full carbon Fiber muffler with quiet core, passenger peg delete, standard end cap 3.ninjamunky85-full carbon fiber muffler, billet flat end cap, FI micro tuner 4.xtrapsi- Full quiet core 18” Carbon Fiber Muffler, billet flat end cap, micro tuner 5.ionized- Full quiet core 18" Carbon Fiber, no decal, Rear Peg removing bracket 6.Hatesneezing- Full quiet core 18” carbon fiber muffler, flat billet end cap, no decal, FI Micro tuner 7.vanman69- ultra high mount stainless, billet end-cap 8.Baja- Full quiet core 18” Carbon Fiber Muffler, flat billet end cap, no decal, "Slanted A" mounting bracket. FI Micro Programmer 9.Felo- Full quiet core 18” carbon fiber muffler, FI micro tuner, "Slanted A" Solo bracket 10.Stablgr- ultra high mount carbon fiber, FI micro tuner, billet end cap, no decal 11.Yakaru- Full quiet-long-core Carbon Fiber full system, FI Micro tuner 12.diwhiteii- Full Ultra High Mount System, Standard Carbon Fiber Muffler 13.joyspring- Accessory "Solo" Mounting Bracket, "Slanted A", FI Micro Programmer, Full Standard Mount System, Standard Carbon Fiber Muffler 14.allanoue- Full quiet-long-core Carbon Fiber full system, FI Micro tuner 15.Bentley813-Full Long quiet core carbon fiber muffler, with billet flat end cap, FI Micro Programmer |
|
March 20th, 2013, 11:03 PM | #94 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Can I have the free one?
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
March 22nd, 2013, 06:51 PM | #95 |
swell dude extraordinaire
Name: Robert
Location: Long Beach, CA
Join Date: May 2011 Motorcycle(s): '13 Ninja 300 (white, streetbike), '08 Ninja 250R (yellow, racebike), '97 Yamaha TZ125 4JT Posts: 14
|
Jiggles,
Interesting list of bikes you've got... so how do you know your Ninja is faster than mine? Were you at the Nov 2012 CVMA round? Mine is plenty fast; I'm working on learning how to ride it faster :-P Robert |
|
March 25th, 2013, 10:47 AM | #96 |
ninjette.org member
Name: Wes
Location: Tampa, FL
Join Date: Mar 2013 Motorcycle(s): Kawasaki Ninja 300 Posts: 30
|
I'm [back] in for the full carbon fiber muffler, billet flat end cap, standard mount.
|
|
March 25th, 2013, 10:57 AM | #97 |
Jigglin' your Jiglets
Name: Sean
Location: San Jose, Ca
Join Date: Jun 2011 Motorcycle(s): 2009 K1300S, 2013 Ninja 300, 2011 Ninja 250R, Faster than Unregistered's ninjette Posts: Too much.
Blog Entries: 1
MOTM - Apr '13
|
Oh trust me, it's faster
__________________________________________________
If the Ninja 250 doesn't have enough power for you, then you don't know how to ride it. AFM #676 Supersports are for n00bs |
|
March 25th, 2013, 12:22 PM | #98 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
|
|
March 25th, 2013, 12:26 PM | #99 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
Updated list!
1.S1att3r-Full carbon fiber muffler, FI micro tuner, passenger peg delete
2.Surferboy120-Full carbon Fiber muffler with quiet core, passenger peg delete, standard end cap 3.ninjamunky85-full carbon fiber muffler, billet flat end cap, FI micro tuner 4.xtrapsi- Full quiet core 18” Carbon Fiber Muffler, billet flat end cap, micro tuner 5.ionized- Full quiet core 18" Carbon Fiber, no decal, Rear Peg removing bracket 6.Hatesneezing- Full quiet core 18” carbon fiber muffler, flat billet end cap, no decal, FI Micro tuner 7.vanman69- ultra high mount stainless, billet end-cap 8.Baja- Full quiet core 18” Carbon Fiber Muffler, flat billet end cap, no decal, "Slanted A" mounting bracket. FI Micro Programmer 9.Felo- Full quiet core 18” carbon fiber muffler, FI micro tuner, "Slanted A" Solo bracket 10.Stablgr- ultra high mount carbon fiber, FI micro tuner, billet end cap, no decal 11.Yakaru- Full quiet-long-core Carbon Fiber full system, FI Micro tuner 12.diwhiteii- Full Ultra High Mount System, Standard Carbon Fiber Muffler 13.joyspring- Accessory "Solo" Mounting Bracket, "Slanted A", FI Micro Programmer, Full Standard Mount System, Standard Carbon Fiber Muffler 14.allanoue- Full quiet-long-core Carbon Fiber full system, FI Micro tuner 15.Bentley813- Long quiet core carbon fiber muffler, with billet flat end cap, FI Micro Programmer 16.Goldenark-full carbon fiber muffler, billet flat end cap, standard mount |
|
March 25th, 2013, 09:20 PM | #100 |
ninjette.org member
Name: Carlos
Location: Puerto Rico
Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181
|
i pre-order the FI tuner before the exhaust, let me tell you, let me tell you, stupid fast shipping , great service , and maps already loaded for my current setup and when i get the exhaust
here are some pics of what to expect when u get the tuner... |
|
March 26th, 2013, 12:22 AM | #101 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
Updated List
1.S1att3r-Full carbon fiber muffler, FI micro tuner, passenger peg delete
2.Surferboy120-Full carbon Fiber muffler with quiet core, passenger peg delete, standard end cap 3.ninjamunky85-full carbon fiber muffler, billet flat end cap, FI micro tuner 4.xtrapsi- Full quiet core 18” Carbon Fiber Muffler, billet flat end cap, micro tuner 5.ionized- Full quiet core 18" Carbon Fiber, no decal, Rear Peg removing bracket 6.Hatesneezing- Full quiet core 18” carbon fiber muffler, flat billet end cap, no decal, FI Micro tuner 7.vanman69- ultra high mount stainless, billet end-cap 8.Baja- Full quiet core 18” Carbon Fiber Muffler, flat billet end cap, no decal, "Slanted A" mounting bracket. FI Micro Programmer 9.Felo- Full quiet core 18” carbon fiber muffler,"Slanted A" Solo bracket 10.Stablgr- ultra high mount carbon fiber, FI micro tuner, billet end cap, no decal 11.Yakaru- Full quiet-long-core Carbon Fiber full system, FI Micro tuner 12.diwhiteii- Full Ultra High Mount System, Standard Carbon Fiber Muffler 13.joyspring- Accessory "Solo" Mounting Bracket, "Slanted A", FI Micro Programmer, Full Standard Mount System, Standard Carbon Fiber Muffler 14.allanoue- Full quiet-long-core Carbon Fiber full system, FI Micro tuner 15.Bentley813- Long quiet core carbon fiber muffler, with billet flat end cap, FI Micro Programmer 16.Goldenark-full carbon fiber muffler, billet flat end cap, standard mount |
|
March 26th, 2013, 12:28 AM | #102 |
swell dude extraordinaire
Name: Robert
Location: Long Beach, CA
Join Date: May 2011 Motorcycle(s): '13 Ninja 300 (white, streetbike), '08 Ninja 250R (yellow, racebike), '97 Yamaha TZ125 4JT Posts: 14
|
OK, I'll have to trust you on that
On another note and back on topic, I installed a cheap (inexpensive) Leo Vince aluminium slip-on as a stopgap measure as the sewing-machine report of the OEM exhaust was too much to bear... yes, quite anxious for production of the Area P systems Hope all the tooling, etc. go flawlessly! |
|
March 28th, 2013, 11:52 AM | #103 |
ninjette.org member
Name: Carlos
Location: Puerto Rico
Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181
|
just a quick word, i install the tuner, easy install , no problem with the tuner, 100% ok and working
|
|
March 31st, 2013, 06:53 AM | #104 | |
ninjette.org certified postwhore
Name: Al
Location: York, Pa
Join Date: Dec 2012 Motorcycle(s): 2013 Ninja 300..............2008 Ninja 500-sold...2009 Ninja 250-Crashed Posts: Too much.
MOTM - Sep '14
|
Quote:
|
|
|
March 31st, 2013, 11:25 AM | #105 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
Can you please put me down for a Full Ultra High Mount System, Standard Stainless Steel Muffler. I've made my decision to upgrade to a 300...
|
|
March 31st, 2013, 11:55 AM | #106 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
|
|
March 31st, 2013, 12:00 PM | #107 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
Updated list! Last Day to add, if anyone else wants to add contact me today!
Group Buy 300- Seventeen Total
1.S1att3r-Full carbon fiber muffler, FI micro tuner, passenger peg delete 2.Surferboy120-Full carbon Fiber muffler with quiet core, passenger peg delete, standard end cap 3.ninjamunky85-full carbon fiber muffler, billet flat end cap, FI micro tuner 4.xtrapsi- Full quiet core 18” Carbon Fiber Muffler, billet flat end cap, micro tuner 5.ionized- Full quiet core 18" Carbon Fiber, no decal, Rear Peg removing bracket 6.Hatesneezing- Full quiet core 18” carbon fiber muffler, flat billet end cap, no decal, FI Micro tuner 7.vanman69- ultra high mount stainless, billet end-cap 8.Baja- Full quiet core 18” Carbon Fiber Muffler, flat billet end cap, no decal, "Slanted A" mounting bracket. FI Micro Programmer 9.Felo- Full quiet core 18” carbon fiber muffler, "Slanted A" Solo bracket 10.Stablgr- ultra high mount carbon fiber, FI micro tuner, billet end cap, no decal 11.Yakaru- Full quiet-long-core Carbon Fiber full system, FI Micro tuner 12.diwhiteii- Full Ultra High Mount System, Standard Carbon Fiber Muffler 13.joyspring- Accessory "Solo" Mounting Bracket, "Slanted A", FI Micro Programmer, Full Standard Mount System, Standard Carbon Fiber Muffler 14.allanoue- Full quiet-long-core Carbon Fiber full system, FI Micro tuner 15.Bentley813- Long quiet core carbon fiber muffler, with billet flat end cap, FI Micro Programmer 16.Goldenark-full carbon fiber muffler, billet flat end cap, standard mount 17.psych0hans- Full Ultra High Mount System, Standard Stainless Steel Muffler |
|
March 31st, 2013, 12:19 PM | #108 |
ninjette.org member
Name: Steve
Location: Oswego, NY
Join Date: Aug 2012 Motorcycle(s): 2013 White 300 Posts: 221
|
How close are we to production and payments?
|
|
March 31st, 2013, 12:26 PM | #109 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
|
|
March 31st, 2013, 01:16 PM | #110 |
ninjette.org member
Name: Raygan
Location: North East Texas
Join Date: Oct 2012 Motorcycle(s): White 2013 Ninja 300(Storm), Silver 2003 Fjr1300 Posts: 173
|
change mine to the cf 18 inch quiet core please.
__________________________________________________
ATGATT For all I know, women who ride motorcycles are all man-hating dominatrix's. It was like a mild panic attack! |
|
March 31st, 2013, 01:26 PM | #111 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
Sorry, I forgot to mention that I want a billet end cap. Cheers!!!
|
|
March 31st, 2013, 04:17 PM | #112 |
Area P
Name: Kerry
Location: SoCal & South Florida
Join Date: Dec 2008 Motorcycle(s): Too many to list Posts: 439
|
Nothing further than noted on that post/update.
"Update - We are still working on some of the tooling/fixtures. Some of them are fairly complex and also require machining and heat treating. Many other components are completed. We are now projecting April 5th for the first production article to be check fit on all the new tooling. Then approximately two - three weeks after that for production systems to start becoming available. As indicated on the first page annoucement - GB prices will be honored to everyone on the list at the end (31st). In addition, anyone who has a FI Micro Programmer ordered at that time, can opt to have it shipped prior to the exhaust systems. You would pay for that item only. The FI Micro Programmer will have free shipping applied within the lower 48 states to GB members. We will pre-load a base map for whatever your current set-up is in position 1. We will then load the appropriate Area P full system Map in position 2. " |
|
March 31st, 2013, 04:20 PM | #113 |
Area P
Name: Kerry
Location: SoCal & South Florida
Join Date: Dec 2008 Motorcycle(s): Too many to list Posts: 439
|
|
|
March 31st, 2013, 06:47 PM | #114 | |
The Violet Vixen
Name: Yakaru
Location: Issaquah, WA & Las Vegas, NV
Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot.
MOTM - Jun '16
|
Quote:
Just two quick questions -- did you ever make a final call on the AFR-meter bong support? Also how's the airbox removal/pod filter tune going? |
|
|
March 31st, 2013, 10:58 PM | #115 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
I'm very curious about this as well, also, will you have maps available for the Dynojet PCV?
|
|
March 31st, 2013, 11:52 PM | #116 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
|
|
March 31st, 2013, 11:57 PM | #117 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
[/QUOTE] Also how's the airbox removal/pod filter tune going?[/QUOTE]
That will not start until they receive the final production system, sometime after April 5. It was stated in other posts. |
|
April 1st, 2013, 07:57 PM | #118 |
ninjette.org guru
Name: David
Location: Lafayette, CA
Join Date: May 2010 Motorcycle(s): 2009 Ninja 250R, 2013 Ninja 300 Posts: 279
|
Final List! Make sure you have everything on there that you want
Group Buy 300
1.S1att3r- Full quiet core 18” Carbon Fiber Muffler, FI micro tuner, passenger peg delete 2.Surferboy120-Full carbon Fiber muffler with quiet core, passenger peg delete, standard end cap 3.ninjamunky85-full carbon fiber muffler, billet flat end cap, FI micro tuner 4.xtrapsi- Full quiet core 18” Carbon Fiber Muffler, billet flat end cap, micro tuner 5.ionized- Full quiet core 18" Carbon Fiber, no decal, Rear Peg removing bracket 6.Hatesneezing- Full quiet core 18” carbon fiber muffler, flat billet end cap, no decal, FI Micro tuner 7.vanman69- ultra high mount stainless, billet end-cap 8.Baja- Full quiet core 18” Carbon Fiber Muffler, flat billet end cap, no decal, "Slanted A" mounting bracket. FI Micro Programmer 9.Felo- Full quiet core 18” carbon fiber muffler, "Slanted A" Solo bracket 10.Stablgr- ultra high mount carbon fiber, FI micro tuner, billet end cap, no decal 11.Yakaru- Full quiet-long-core Carbon Fiber full system, FI Micro tuner, 02 bung 12.diwhiteii- Full Ultra High Mount System, Standard Carbon Fiber Muffler 13.joyspring- Accessory "Solo" Mounting Bracket, "Slanted A", FI Micro Programmer, Full Standard Mount System, Standard Carbon Fiber Muffler 14.allanoue- Full quiet-long-core Carbon Fiber full system, FI Micro tuner 15.Bentley813- Long quiet core carbon fiber muffler, with billet flat end cap, FI Micro Programmer 16.Goldenark-full carbon fiber muffler, billet flat end cap, standard mount 17.psych0hans- Full Ultra High Mount System, Standard Stainless Steel Muffler, billet end cap Last futzed with by diwhiteii; April 2nd, 2013 at 10:45 AM. |
|
April 1st, 2013, 08:04 PM | #119 | |
The Violet Vixen
Name: Yakaru
Location: Issaquah, WA & Las Vegas, NV
Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot.
MOTM - Jun '16
|
Add this on for me:
Quote:
|
|
|
April 1st, 2013, 08:31 PM | #120 |
ninjette.org member
Name: Carlos
Location: Puerto Rico
Join Date: Jan 2013 Motorcycle(s): Ninja 300R Posts: 181
|
when they gonna do the tunning for the pods, are they gonna an update on their previews maps or just tune for pods?
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
SF Bay Area Ninjetters invited for FE/fun runs 9/27-9/30 | greenaero | Ride Reports | 15 | September 28th, 2013 04:29 PM |
Area P - GB (for the new-gen 250!) Runs through February 28. | kbryant | Motorcycle-related | 239 | May 1st, 2013 04:42 PM |
SoCal: Azusa/GMR Monday March 9 and Tuesday March 10. | Ken | Ride Reports | 23 | March 10th, 2009 06:12 AM |
|
|