April 21st, 2018, 09:40 AM | #41 | |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Quote:
Your 92027 spacer has a pocket opening on one side. When installing, does this opening side face the wheel or the swingarm? |
|
|
April 21st, 2018, 04:35 PM | #42 |
ninjette.org member
Name: Tylor
Location: Michigan
Join Date: Aug 2017 Motorcycle(s): 2005 Ninja 250 Posts: 78
|
So for anyone interested, I'm not sure if this actually fixed it or I just happened to put it together right this time, but I loosened up the bracket that holds the brake caliper in place, because I noticed it seemed to make the axle bind up when i put it through without the tire on. So after it was all put back together i tightened it up where it was with the axle through and the tire straight, and it's fine now.
|
|
April 21st, 2018, 07:49 PM | #43 |
Rev Limiter
Name: Jay
Location: WI
Join Date: Jul 2013 Motorcycle(s): '06 SV650n, '00 Derbi GPR, '64 CA77 Dream 305, '70 CL450 Scrambler, numerous dirt bikes Posts: A lot.
MOTM - Jun '18, Oct '16
|
I'm still not following exactly how this could happen.
If the outside wheel bearings are in-place the axle should be running through the center of the wheel. And if the swingarm isn't bent... Waiting for someone to solve the mystery. |
|
April 21st, 2018, 10:15 PM | #44 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Also not sure how rear brake can affect positioning of rear axle and wheel.
|
|
April 22nd, 2018, 04:12 AM | #45 |
ninjette.org member
Name: Tylor
Location: Michigan
Join Date: Aug 2017 Motorcycle(s): 2005 Ninja 250 Posts: 78
|
|
|
April 22nd, 2018, 09:06 AM | #46 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Notice that there's only one way the brake bracket can fit on axle, no adjustment possible.
The only thing that makes sense is you got spacer 92027A reversed. Then it would cause: 1. Wheel to stop spinning, because spacer flange would squeeze seal instead of pressing on brake caliper bracket 2. Only way for wheel to spin would be for axle-nut to be really loose, thus wheel would wobble 3. Wheel would sit further to left 4. In order for brake disc to fit, wheel would lean to right 5. Under braking, wheel wobble would cause bike to wiggle in different directions like snake You need to replace seal 92049, it's most likely damaged. This will allow dirt in and damage wheel bearing quickly and need replacing in less than a couple months. |
|
April 22nd, 2018, 09:35 AM | #47 | |
ninjette.org member
Name: Tylor
Location: Michigan
Join Date: Aug 2017 Motorcycle(s): 2005 Ninja 250 Posts: 78
|
Quote:
Bracket 43034 bolts into an arm at the top, i loosened that bolt |
|
|
April 22nd, 2018, 09:57 AM | #48 | |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Quote:
Take a photo of your rear axle like this. Seal to left of screwdriver tip is most likely damaged and needs replacement. Last futzed with by DannoXYZ; April 22nd, 2018 at 01:29 PM. |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wider tire in the back? | salcuta88 | 2008 - 2012 Ninja 250R Tech Talk | 34 | October 4th, 2014 02:11 PM |
Kissed someones back bumper with my front tire this morning | YORCHI | !%@*#$%!)@#&!%@ I crashed! | 11 | November 23rd, 2012 05:50 PM |
Quick stop and felt the bike tire start to fishtail back and forth | Hitman | General Motorcycling Discussion | 23 | June 20th, 2011 06:22 AM |
Different front and back tire. good idea or not? | sudapuff | 1986 - 2007 Ninja 250R Tech Talk | 0 | October 26th, 2010 12:35 AM |
[roadracingworld.com] - Bridgestone Looks Back On First Season As MotoGP Control Tire | Ninjette Newsbot | Motorcycling News | 0 | November 25th, 2009 09:22 AM |
|
|