Special exhaust deal - Page 3

ztrack157 · June 25th, 2009, 09:52 PM

Ya I saw your thread. Make that SOB pay through the nose.

kazam58 · June 25th, 2009, 10:33 PM

I may consider it if it's not that much louder and you say it's legal at a track with a lower db limit. What I'm concerned about is that they claim on the track's site that they can/will measure the loudness at any given point while the bike is on the track. When one of these pipes is screaming at 12k rpms I'm certain they'll exceed 103db, hell, i bet even the stocker comes closer to that than one might think.

ztrack157 · June 25th, 2009, 10:47 PM

stock is 80db to comply with DOT. all I can do is extend the GB another week an test them all when I get them. then I will take db readings at 20', 30', and 50'. i'll do it at 10000rpm or something.

ztrack157 · June 25th, 2009, 10:48 PM

First week of august is when the 1st shipment is due since bram was overloaded. Your windscreen is going to be tight Andy.

kazam58 · June 25th, 2009, 11:11 PM

Haha, alright. Don't worry about my schedule, if need be, I'll just have you ship the screen to me at my college, I'm sure they won't have a problem handling a little box

As for the exhaust, I was originally going to grab an Area P, because it was still cheap compared to most other systems, but $285?! Unlike those rearsets, I don't think this one's going to be able to wait... And if they're going to be testing decibels, they won't be able to be right next to the bike, so I'm sure I've got plenty of leeway there. The guys with liter bikes and what not have to be screaming just as loud IMO.

ztrack157 · June 25th, 2009, 11:17 PM

Laguna seca has a stock exhaust only policy. And even their db rating is ridiculously low so low stock exhausts often are illegal. It's funny to because the F1 cars are super loud. Loud enough you can hear them 15 miles away in Salinas. Rich people tend to kill us poor folks fun in CA. I had someone build a house at the end of my runway and then try to sue me so I couldn't fly my plane in and out of my property. They gave up when they realized they had no case.

Anyhow I will get db reading for you guys after the first shipment gets hear for those of you who want them.

tinng321 · June 26th, 2009, 06:59 AM

any video of the VR black?
i'm interested.
thanks,
tin

xTKx · June 26th, 2009, 08:34 AM

Is it too late to sign up? Is the V6R the short one or long one? What date are deposits due?
I read through the whole thread but forgot all of it by the time I got to the end

You can PM me if you'd like Matt. Thanks!

ztrack157 · June 26th, 2009, 10:53 AM

Tony the GB ends the first week of August. I would like the dposits if you are totally certain your getting one anytime in the last 2 weeks of the GB. the V6R is the shorter one. Tin there is a dyno run of the VR on the front page you can go to the Sportisi main site for other clips although the quality is not that good. Youtube has a few also.

ztrack157 · June 26th, 2009, 05:41 PM

The VR black is looking like it is going to come polished without black. The paint that they were testing was not up to expectations. I'm looking into ceramic powder coating though.

kazam58 · June 26th, 2009, 07:42 PM

Quote:

Originally Posted by ztrack157

The VR black is looking like it is going to come polished without black. The paint that they were testing was not up to expectations. I'm looking into ceramic powder coating though.

I was right about to grab one, but this has stalled me in my tracks. I really don't like the look of a polished exhaust on the 250. Let us know if you can make this sucker black. If you can, I'm in.

ztrack157 · June 26th, 2009, 07:51 PM

Ya understandable. I will know in a few days whats up. I like the black look but if the paint isn't going to hold up I'm not going to sell it that way. I'm almost tempted to bring them over and powder coat them myself since I have done it before and it is fairly simplistic.

kazam58 · June 26th, 2009, 08:05 PM

That would work fine, and I understand that you don't want to sell something that's not going to work/look right. If you can give me a definite answer and I know that the can will be black, then count me in for the VR. Since you won't be placing this order till much later on I'm not in much of a hurry to know, you just take your time and figure out the best route

ztrack157 · June 26th, 2009, 08:06 PM

I feel generous. So $260 Shipped no matter how many buy in. And at this price this kind of a GB will never happen again. Since Private label is doing $300 shipped for their (AP copy) exhaust.

ztrack157 · June 26th, 2009, 08:07 PM

When I know I will let you guys know.

Ohh Snap · June 28th, 2009, 04:53 PM

oh nice, hopefully my DP will sell by then

and i'll have a new bike

xTKx · June 29th, 2009, 12:50 PM

Hey Matt, add me to the list please (thanks for answering my questions). If possible, I'd like a V6R powder coated black

Just like Andy said, I'm not a huge fan of polished exhaust and I don't want another long pipe either. Let me know if this is feasable.

If I can't make the deposit by the time the deadline's here I'll let you know.

PS- Will you be selling any rejet kits or should I be ok with shimming the needles?

ztrack157 · June 29th, 2009, 01:38 PM

xTKx I don't know about powder coating the whole V6R. Especially when it comes with a black anodized tip. Powder coating is easy enough but it still costs me money to do it. The only reason why I am contemplating doing the VR's is because I had labeled them as black and shown pictures to everyone only to find out the paint was not up to my or Bram's standards. At $260 you can still ship the can to Tim and have him powder coat it for $36. Your still looking at a sweet deal. I'm still trying to figure this out.

List: For $260 shipped any exhaust

1. Ohh Snap VR Black+ bag of skittles
2. Rookie V6R quiet
3. Duvi VR Black
4. Chamus57 V6R Quiet
5. xTKx V6R
6.
7.
8.
9.
10.

__________________________________________________

kazam58 · June 29th, 2009, 03:46 PM

To hell with it. For that price, sign me up for a VR. If you're not entirely sure you can powdercoat it yourself then I'll just have you ship it directly to Tim and have him do it for me. I don't care if it'll cost extra money. It'll still be around $300 and that's a steal.

Thanks for hooking us up with these sweet deals, Matt, we owe you.

Duvivr6 · June 29th, 2009, 04:47 PM

this GB get better everyday!! I'll pay 262 if you add a sportisi sticker to my order

Rayme · June 29th, 2009, 05:09 PM

any video of the quiet one?

ztrack157 · June 29th, 2009, 07:47 PM

No vid on the quiet yet remy. I will ask bram to get some video.

1. Ohh Snap VR Black+ bag of skittles
2. Rookie V6R quiet
3. Duvi VR Black
4. Chamus57 V6R Quiet
5. xTKx V6R
6. Kazam58 VR
7.
8.
9.
10.

blubyu · June 30th, 2009, 05:28 PM

Sign me up for a V6R. Do I have to specify that I want the black tip on mine? If I do then I just did and if I don't then never mind

Is there a recommended jet kit to use for this?

ztrack157 · June 30th, 2009, 06:20 PM

1. Ohh Snap VR Black+ bag of skittles
2. Rookie V6R quiet
3. Duvi VR Black
4. Chamus57 V6R Quiet
5. xTKx V6R
6. Kazam58 VR
7. blubyu V6R
8.
9.
10.

I would say buy factory pro since there is more in their kit. If you use a dyno jet kit a 100 main jet from their kit would be best size.
__________________________________________________

ztrack157 · July 3rd, 2009, 09:24 PM

OK Guys no sweating any longer. Powder coating is available so no sweat th VR black lives again. Also just so you know all exhausts ae warrantied for 3 years for their sound and 1 yr for craftsmanship.

Ohh Snap · July 4th, 2009, 07:50 AM

looks like i will be getting this without having a bike, yet.

Can't beat the price.

ztrack157 · July 4th, 2009, 10:47 AM

LOL.

List updated. Andy got a deal.

1. Ohh Snap VR Black+ bag of skittles
2. Rookie V6R quiet
3. Duvi VR Black
4. Chamus57 V6R Quiet
5. xTKx V6R
6. blubyu V6R
7.
8.
9.
10.

ztrack157 · July 4th, 2009, 10:50 AM

I will have db readings on the VR Black next week sometime as well.

andrewwoo · July 4th, 2009, 09:00 PM

aww man! thats a sweet price! i got an order from matt earlier last month without the gb... eh its okay..

MATT i want stickers with mine please! hehe

ztrack157 · July 4th, 2009, 09:01 PM

You got it Andrew. But remember you still got a deal on the exhaust. Just not this good.

Chamus57 · July 4th, 2009, 09:43 PM

I would like stickers with mine also

Thanks

ztrack157 · July 4th, 2009, 10:47 PM

ok

Duvivr6 · July 5th, 2009, 02:33 PM

can't wait!!

divingtigger · July 8th, 2009, 08:23 AM

I'll take a VR6 depending on shipping to canada (or is that included in the price too?), with a sticker or 2. Seen that some guys are asking for the quiet VR6 is there 2 options or are they just saying they want the quieter exhaust.....the VR6

Thanks

ztrack157 · July 8th, 2009, 04:31 PM

There are two versions. I will cover shipping up to $20 to Canada. The balance of shipping fees is on you over $20.

divingtigger · July 9th, 2009, 08:28 AM

Quote:

Originally Posted by divingtigger

I'll take a VR6 depending on shipping to canada (or is that included in the price too?), with a sticker or 2. Seen that some guys are asking for the quiet VR6 is there 2 options or are they just saying they want the quieter exhaust.....the VR6

Thanks

I'm in for a VR6 once you get some info on the difference between the noise level of the loud and quiet one I'll decide between those 2

HA-Y-N NINJA · July 9th, 2009, 07:10 PM

Does the black come with a black end cap or just the polished tip? and what jet kit do you recommend?

HA-Y-N NINJA · July 9th, 2009, 07:13 PM

So how much will the total cost be shipped to tualatin oregon?

ztrack157 · July 9th, 2009, 09:37 PM

$260 Shipped. The VR Black should come as seen in the photos but bram has talked about it being all black as well I will know in a few days since he shipped me one for testing. Jet kit either a Dyno jet stage 2 or factory pro.

andrewwoo · July 10th, 2009, 06:47 AM

hey matt, is there other places to get the factory pro jet kit? thanks in advance!

June 25th, 2009, 09:52 PM	#81
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Ya I saw your thread. Make that SOB pay through the nose. __________________________________________________ Sportisimoto USA is born.

June 25th, 2009, 10:33 PM	#82
kazam58 Sarcasm: Yea that'll work Name: Andy Location: Essex Jct, VT Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250R Posts: 330	I may consider it if it's not that much louder and you say it's legal at a track with a lower db limit. What I'm concerned about is that they claim on the track's site that they can/will measure the loudness at any given point while the bike is on the track. When one of these pipes is screaming at 12k rpms I'm certain they'll exceed 103db, hell, i bet even the stocker comes closer to that than one might think. __________________________________________________ '08 Blue - Seat Cowl - A-Tech CF Fender Elim - Zartan's Exhaust Hanger - Dynojet Kit - Drilled Slides - Snorkel Removed - K&N Drop In Air Filter - Tech Spec Grips - Sportisi Windscreen & VR Exhaust

June 25th, 2009, 10:47 PM	#83
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	stock is 80db to comply with DOT. all I can do is extend the GB another week an test them all when I get them. then I will take db readings at 20', 30', and 50'. i'll do it at 10000rpm or something. __________________________________________________ Sportisimoto USA is born.

June 25th, 2009, 10:48 PM	#84
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	First week of august is when the 1st shipment is due since bram was overloaded. Your windscreen is going to be tight Andy. __________________________________________________ Sportisimoto USA is born.

June 25th, 2009, 11:11 PM	#85
kazam58 Sarcasm: Yea that'll work Name: Andy Location: Essex Jct, VT Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250R Posts: 330	Haha, alright. Don't worry about my schedule, if need be, I'll just have you ship the screen to me at my college, I'm sure they won't have a problem handling a little box As for the exhaust, I was originally going to grab an Area P, because it was still cheap compared to most other systems, but $285?! Unlike those rearsets, I don't think this one's going to be able to wait... And if they're going to be testing decibels, they won't be able to be right next to the bike, so I'm sure I've got plenty of leeway there. The guys with liter bikes and what not have to be screaming just as loud IMO. __________________________________________________ '08 Blue - Seat Cowl - A-Tech CF Fender Elim - Zartan's Exhaust Hanger - Dynojet Kit - Drilled Slides - Snorkel Removed - K&N Drop In Air Filter - Tech Spec Grips - Sportisi Windscreen & VR Exhaust

June 25th, 2009, 11:17 PM	#86
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Laguna seca has a stock exhaust only policy. And even their db rating is ridiculously low so low stock exhausts often are illegal. It's funny to because the F1 cars are super loud. Loud enough you can hear them 15 miles away in Salinas. Rich people tend to kill us poor folks fun in CA. I had someone build a house at the end of my runway and then try to sue me so I couldn't fly my plane in and out of my property. They gave up when they realized they had no case. Anyhow I will get db reading for you guys after the first shipment gets hear for those of you who want them. __________________________________________________ Sportisimoto USA is born.

June 26th, 2009, 06:59 AM	#87
tinng321 ninjette.org sage Name: Tin Location: NJ Join Date: Apr 2009 Motorcycle(s): 08 black 250r (sold); '09 black zx6r Posts: 903	any video of the VR black? i'm interested. thanks, tin

June 26th, 2009, 08:34 AM	#88
xTKx Finally! Name: Tony Location: Central TX Join Date: Jan 2009 Motorcycle(s): 09 Red 250R Posts: 420 Blog Entries: 4	Is it too late to sign up? Is the V6R the short one or long one? What date are deposits due? I read through the whole thread but forgot all of it by the time I got to the end You can PM me if you'd like Matt. Thanks! __________________________________________________ -2009 Red Ninja 250R- Intuitive frame sliders, comp werkes fender eliminator ...

June 26th, 2009, 10:53 AM	#89
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Tony the GB ends the first week of August. I would like the dposits if you are totally certain your getting one anytime in the last 2 weeks of the GB. the V6R is the shorter one. Tin there is a dyno run of the VR on the front page you can go to the Sportisi main site for other clips although the quality is not that good. Youtube has a few also. __________________________________________________ Sportisimoto USA is born.

June 26th, 2009, 05:41 PM	#90
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	The VR black is looking like it is going to come polished without black. The paint that they were testing was not up to expectations. I'm looking into ceramic powder coating though. __________________________________________________ Sportisimoto USA is born.

June 26th, 2009, 07:51 PM	#92
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	Ya understandable. I will know in a few days whats up. I like the black look but if the paint isn't going to hold up I'm not going to sell it that way. I'm almost tempted to bring them over and powder coat them myself since I have done it before and it is fairly simplistic. __________________________________________________ Sportisimoto USA is born.

June 26th, 2009, 08:05 PM	#93
kazam58 Sarcasm: Yea that'll work Name: Andy Location: Essex Jct, VT Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250R Posts: 330	That would work fine, and I understand that you don't want to sell something that's not going to work/look right. If you can give me a definite answer and I know that the can will be black, then count me in for the VR. Since you won't be placing this order till much later on I'm not in much of a hurry to know, you just take your time and figure out the best route __________________________________________________ '08 Blue - Seat Cowl - A-Tech CF Fender Elim - Zartan's Exhaust Hanger - Dynojet Kit - Drilled Slides - Snorkel Removed - K&N Drop In Air Filter - Tech Spec Grips - Sportisi Windscreen & VR Exhaust

June 26th, 2009, 08:06 PM	#94
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	I feel generous. So $260 Shipped no matter how many buy in. And at this price this kind of a GB will never happen again. Since Private label is doing $300 shipped for their (AP copy) exhaust. __________________________________________________ Sportisimoto USA is born.

June 26th, 2009, 08:07 PM	#95
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	When I know I will let you guys know. __________________________________________________ Sportisimoto USA is born.

June 28th, 2009, 04:53 PM	#96
Ohh Snap 420 President Name: John Location: SoCal 818 Join Date: Jun 2009 Motorcycle(s): 09 Ninja grass color Posts: 96	oh nice, hopefully my DP will sell by then and i'll have a new bike

June 29th, 2009, 12:50 PM	#97
xTKx Finally! Name: Tony Location: Central TX Join Date: Jan 2009 Motorcycle(s): 09 Red 250R Posts: 420 Blog Entries: 4	Hey Matt, add me to the list please (thanks for answering my questions). If possible, I'd like a V6R powder coated black Just like Andy said, I'm not a huge fan of polished exhaust and I don't want another long pipe either. Let me know if this is feasable. If I can't make the deposit by the time the deadline's here I'll let you know. PS- Will you be selling any rejet kits or should I be ok with shimming the needles? __________________________________________________ -2009 Red Ninja 250R- Intuitive frame sliders, comp werkes fender eliminator ...

June 29th, 2009, 01:38 PM	#98
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	xTKx I don't know about powder coating the whole V6R. Especially when it comes with a black anodized tip. Powder coating is easy enough but it still costs me money to do it. The only reason why I am contemplating doing the VR's is because I had labeled them as black and shown pictures to everyone only to find out the paint was not up to my or Bram's standards. At $260 you can still ship the can to Tim and have him powder coat it for $36. Your still looking at a sweet deal. I'm still trying to figure this out. List: For $260 shipped any exhaust 1. Ohh Snap VR Black+ bag of skittles 2. Rookie V6R quiet 3. Duvi VR Black 4. Chamus57 V6R Quiet 5. xTKx V6R 6. 7. 8. 9. 10. __________________________________________________ __________________________________________________ Sportisimoto USA is born.

June 29th, 2009, 03:46 PM	#99
kazam58 Sarcasm: Yea that'll work Name: Andy Location: Essex Jct, VT Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250R Posts: 330	To hell with it. For that price, sign me up for a VR. If you're not entirely sure you can powdercoat it yourself then I'll just have you ship it directly to Tim and have him do it for me. I don't care if it'll cost extra money. It'll still be around $300 and that's a steal. Thanks for hooking us up with these sweet deals, Matt, we owe you. __________________________________________________ '08 Blue - Seat Cowl - A-Tech CF Fender Elim - Zartan's Exhaust Hanger - Dynojet Kit - Drilled Slides - Snorkel Removed - K&N Drop In Air Filter - Tech Spec Grips - Sportisi Windscreen & VR Exhaust

June 29th, 2009, 04:47 PM	#100
Duvivr6 ninjette.org member Name: Duvi Location: Oklahoma City Join Date: May 2009 Motorcycle(s): 09 Ninja 250R Special Ed Posts: 99	this GB get better everyday!! I'll pay 262 if you add a sportisi sticker to my order

June 29th, 2009, 05:09 PM	#101
Rayme ninjette.org guru Name: Remy Location: Moncton Join Date: Apr 2009 Motorcycle(s): '04 sv650s Posts: 438	any video of the quiet one? __________________________________________________ There's 2 types of people in this world, those who complain and those who act.

June 29th, 2009, 07:47 PM	#102
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	No vid on the quiet yet remy. I will ask bram to get some video. 1. Ohh Snap VR Black+ bag of skittles 2. Rookie V6R quiet 3. Duvi VR Black 4. Chamus57 V6R Quiet 5. xTKx V6R 6. Kazam58 VR 7. 8. 9. 10. __________________________________________________ Sportisimoto USA is born.

June 30th, 2009, 05:28 PM	#103
blubyu ninjette.org member Name: Todd Location: Olympia, WA Join Date: Feb 2009 Motorcycle(s): 2009 Ninja 250R / 2009 CBR600RR Posts: 51	Sign me up for a V6R. Do I have to specify that I want the black tip on mine? If I do then I just did and if I don't then never mind Is there a recommended jet kit to use for this? __________________________________________________ Scorpion EXO-1000 - Scorpion Hat Trick Jacket - Scorpion Magnum Gloves - TourMaster Caliper Pants - AlpineStars Octane Riding Shoes

June 30th, 2009, 06:20 PM	#104
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	1. Ohh Snap VR Black+ bag of skittles 2. Rookie V6R quiet 3. Duvi VR Black 4. Chamus57 V6R Quiet 5. xTKx V6R 6. Kazam58 VR 7. blubyu V6R 8. 9. 10. I would say buy factory pro since there is more in their kit. If you use a dyno jet kit a 100 main jet from their kit would be best size. __________________________________________________ __________________________________________________ Sportisimoto USA is born.

July 3rd, 2009, 09:24 PM	#105
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	OK Guys no sweating any longer. Powder coating is available so no sweat th VR black lives again. Also just so you know all exhausts ae warrantied for 3 years for their sound and 1 yr for craftsmanship. __________________________________________________ Sportisimoto USA is born.

July 4th, 2009, 07:50 AM	#106
Ohh Snap 420 President Name: John Location: SoCal 818 Join Date: Jun 2009 Motorcycle(s): 09 Ninja grass color Posts: 96	looks like i will be getting this without having a bike, yet. Can't beat the price.

July 4th, 2009, 10:47 AM	#107
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	LOL. List updated. Andy got a deal. 1. Ohh Snap VR Black+ bag of skittles 2. Rookie V6R quiet 3. Duvi VR Black 4. Chamus57 V6R Quiet 5. xTKx V6R 6. blubyu V6R 7. 8. 9. 10. __________________________________________________ Sportisimoto USA is born.

July 4th, 2009, 10:50 AM	#108
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	I will have db readings on the VR Black next week sometime as well. __________________________________________________ Sportisimoto USA is born.

July 4th, 2009, 09:00 PM	#109
andrewwoo WHEE! Name: Andrew Location: VA Join Date: Apr 2009 Motorcycle(s): 2009 Black Kawi 250R Posts: 91	aww man! thats a sweet price! i got an order from matt earlier last month without the gb... eh its okay.. MATT i want stickers with mine please! hehe __________________________________________________ 2009 Metallic Diablo Black Ninja 250R 6000K H7 HIDs \| Targa Fender Eliminator Pazzo Levers \| PROGRIP Tank Pad

July 4th, 2009, 09:01 PM	#110
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	You got it Andrew. But remember you still got a deal on the exhaust. Just not this good. __________________________________________________ Sportisimoto USA is born.

July 4th, 2009, 09:43 PM	#111
Chamus57 ninjette.org member Name: Lee Location: Alabama Join Date: May 2009 Motorcycle(s): 2009 Kawasaki Ninja 250r se Posts: 169	I would like stickers with mine also Thanks

July 4th, 2009, 10:47 PM	#112
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	ok __________________________________________________ Sportisimoto USA is born.

July 5th, 2009, 02:33 PM	#113
Duvivr6 ninjette.org member Name: Duvi Location: Oklahoma City Join Date: May 2009 Motorcycle(s): 09 Ninja 250R Special Ed Posts: 99	can't wait!!

July 8th, 2009, 08:23 AM	#114
divingtigger Pedal Power Name: Rob Location: Winterpeg (Winnipeg) Join Date: Jun 2009 Motorcycle(s): 2008 Ninja EX250R Posts: 401	I'll take a VR6 depending on shipping to canada (or is that included in the price too?), with a sticker or 2. Seen that some guys are asking for the quiet VR6 is there 2 options or are they just saying they want the quieter exhaust.....the VR6 Thanks

July 8th, 2009, 04:31 PM	#115
ztrack157 The Sportisi Master Name: Matt Location: Chico Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.	There are two versions. I will cover shipping up to $20 to Canada. The balance of shipping fees is on you over $20. __________________________________________________ Sportisimoto USA is born.

July 9th, 2009, 07:10 PM	#117
HA-Y-N NINJA ninjette.org member Name: Cholby Location: Tualatin,Oregon Join Date: May 2009 Motorcycle(s): 2008 Plasma Blue 250 ninja Posts: 74	Does the black come with a black end cap or just the polished tip? and what jet kit do you recommend?