May 20th, 2012, 02:46 PM | #1 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
Trying EBC pads again.... mistake?
Those who have been around a while may remember my issues with EBC rotors and pads. Although not the OP, my story is in here: http://www.ninjette.org/forums/showt...t=56322&page=3
Well.... after going back to OEM rotors, and using Galfer pads for the last year(organic... not the best choice), it is time to replace the pads again. Because I hear so many have good luck with the EBC HH pads, I decided to give it ANOTHER try, but this time on my OEM rotors. I just installed and took her on a gentile ride around the block a few times. First impression: I sure am glad I headed the warnings about taking it slow before they are fully bedded, because it is true.... they DON'T stop yet. Other than this, which wasn't too much of a surprise, nothing felt or sounded funny, although I never went above 30 mph. HOWEVER, upon inspecting the rotors on my return, I started having flashbacks to the disasters of last year. All my other pads (OEM and Galfer) have always worn shiny and smooth on the rotors. BUT, these new EBC pads are making marks that remind me of last year. I'll post pics below to illustrate what 1/2 mile of slow and easy riding did: What do you guys think? Is this bad news, or look normal to you?
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen) Honda CBR500r (2014) - FOR SALE Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned |
|
May 20th, 2012, 03:16 PM | #2 |
wat
Name: wat
Location: tustin/long beach
Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much.
Blog Entries: 5
MOTM - Oct '12, Feb '14
|
i donno mine kinda look the same. they say you're supposed to sand the rotor with new pads but i never do. i know a lot of people say go vesrah or go home but i use ebc HH pads cause i still have 2 sets left from a sale
__________________________________________________
|
|
May 20th, 2012, 03:18 PM | #3 |
Ms. Personality
Name: CB
Location: Murvill, TN
Join Date: Jan 2009 Motorcycle(s): Depends on the week you ask Posts: A lot.
|
I have EBC HH pads and my rotors look the same as yours.
|
|
May 20th, 2012, 04:46 PM | #4 |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Same.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
May 20th, 2012, 05:26 PM | #5 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
I guess I won't worry about it then, unless something happens with them. They sure seem a lot rougher on the rotors.
__________________________________________________
Honda Interceptor VFR800 DLX (2014, 8th gen) Honda CBR500r (2014) - FOR SALE Kawi Ninja 250r (2008) - Restored and passed-down within family, only to be abandoned |
|
May 20th, 2012, 05:53 PM | #6 |
RIP Alex
Name: Cuong
Location: Houston, TX
Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot.
Blog Entries: 2
|
Honestly, I think the stock pads brake better than the ebc pads I have on right now. I sanded down the rotors and flushed my pads at the same time.
I'll post a pic of my rotor later when I'm free.
__________________________________________________
HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days |
|
May 20th, 2012, 06:11 PM | #7 |
ninjette.org guru
Name: Matthew
Location: Washington
Join Date: Aug 2010 Motorcycle(s): Bike-less, Can I ride yours? Posts: 318
|
I just installed a pair of vesrah brakes this weekend, so far I like them.
__________________________________________________
RR stands for Responsible Riding... Right? |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[roadracingworld.com] - EBC GPFAX Brake Pads | Ninjette Newsbot | Motorcycling News | 0 | November 3rd, 2013 09:10 PM |
New EBC front pads for 08-12 | CThunder-blue | Motorcycle-related | 4 | August 15th, 2012 07:01 PM |
DIY SS Brake Lines and EBC HH pads | ninja250 | 2008 - 2012 Ninja 250R Tech Talk | 60 | January 11th, 2011 11:45 AM |
EBC FA265HH Brake Pads | altomista | Motorcycle-related | 1 | March 9th, 2010 05:45 PM |
Anyone have trouble finding EBC HH Sintered Brake Pads? | headshrink | 2008 - 2012 Ninja 250R Tech Talk | 12 | August 22nd, 2009 07:51 PM |
|
|