November 26th, 2012, 10:02 AM | #1 |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
valve emulators
http://www.amazon.com/Caddies-Cartri.../dp/B000GV0RWO
Been considering these with my Amazon gift card, due to the reviews I've read on the ninja250.org site. Does anyone have experience with these? Worth it?
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
November 26th, 2012, 01:23 PM | #2 |
ninjette.org member
Name: Jim
Location: Jax, FL
Join Date: May 2012 Motorcycle(s): 2000 Ninjette, 98 CBR600, 98 VFR800, 2000 BMW R1100RS, Kymco Movie 150 Posts: 146
|
Make sure you get springs too. Worth every penny.
__________________________________________________
Jim Moore Jax, FL |
|
November 26th, 2012, 01:33 PM | #3 |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
The main reason I'm looking to get the valve emulators is to soak up a little more road vibration, as well as provide better dampening. What type of springs should I look into?
Also, I assume the fork oil will need to be changed for this. Which oil should I replace it with?
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
November 26th, 2012, 02:08 PM | #4 |
cuz
Name: Israel
Location: Houston (me) Galveston
Join Date: Jul 2011 Motorcycle(s): 09 ninja 250r Posts: A lot.
|
__________________________________________________
THE GOOD LIFE |
|
November 26th, 2012, 02:47 PM | #5 |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
Awesome! Thanks for the info, I'll check those ones out too.
What should I be looking at for installation labor?
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
November 26th, 2012, 02:54 PM | #6 |
cuz
Name: Israel
Location: Houston (me) Galveston
Join Date: Jul 2011 Motorcycle(s): 09 ninja 250r Posts: A lot.
|
__________________________________________________
THE GOOD LIFE |
|
November 26th, 2012, 02:58 PM | #7 |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
So about 2 or 3 hours. Sounds about right. Should only run me about $150 to a friend to install.
$350 all together for the springs, emulators, oil, and labor. Any word on what fork oil to use? Also, I found a set of "stiffer than stock" front springs, that the previous owner had given me. Is there any way to tell what the stiffness is on them?
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
November 26th, 2012, 05:27 PM | #8 |
sail away
Name: Jon
Location: San Jose
Join Date: Jul 2012 Motorcycle(s): gixxer (sold), ninjette (upgrade!) Posts: 964
Blog Entries: 8
|
I just refreshed my forks this weekend. It is really easy. Gear puller is not necessary to compress the cap. Make sure you install this:
Highly recommend you do the suspension upgrade in stages. Refresh fork oil first (easiest and probably needs to be done anyway). Ride for awhile. Then add springs (sonic springs are cheap). Ride for awhile. Then have valve emulators installed (expensive). This way you can feel what happens for each thing you change and log it in your memory somewhere. According to the ninja 250 FAQ the stock spring rate is 0.44 kg/mm. Spring rate can be measured if you have a measuring caliper. Find a calculator on the net and input the measurements. Usually you measure things like outer diameter, thickness of spring, unloaded length, number of coils, etc. How much do you weigh? Use your weight in the spring calculator on race tech or sonic springs' websites. This will tell you what weight fork oil to use. I don't think the brand matters unless you are racing. |
|
November 26th, 2012, 05:31 PM | #9 |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
I weigh 135 on a heavy day, so not heavy at all.
I'll take a look at their site to determine the stiffness and report back on what I think they are. Sonic Spring's name sounds vaguely familiar.
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
November 26th, 2012, 05:47 PM | #10 |
sail away
Name: Jon
Location: San Jose
Join Date: Jul 2012 Motorcycle(s): gixxer (sold), ninjette (upgrade!) Posts: 964
Blog Entries: 8
|
You may be too light for their lightest spring (0.7 kg/mm). The Race Tech calculator suggests 0.626 kg/mm for you. Sonic Springs says 0.7 kg/mm, but I think that is wrong since I weigh 170 and it lists 0.7 for me. Sonic springs does do custom spring rates for feather weights.
|
|
November 26th, 2012, 07:35 PM | #11 |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
The ones I have are .8
Too stiff?
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
November 27th, 2012, 05:50 AM | #12 |
ninjette.org member
Name: Jim
Location: Jax, FL
Join Date: May 2012 Motorcycle(s): 2000 Ninjette, 98 CBR600, 98 VFR800, 2000 BMW R1100RS, Kymco Movie 150 Posts: 146
|
I weigh 160. I have 0.70s. They're a little soft. The 0.80s may be a little stiff for you, but they will be a huge improvement over the current springs. You can make your own spacers from 3/4" id pvc pipe. That's what Race Tech sends you when you order springs. You can try different spacer lengths to see how much sag it gives you. Try different spacer lengths until you end up with 25-35 mm of sag.
Speaking of that, I would buy the emulators from RaceTech if I were you. Once you buy the stuff they're available to answer questions. They're really helpful. I don't think Amazon has any suspension experts on staff.
__________________________________________________
Jim Moore Jax, FL |
|
November 27th, 2012, 07:13 AM | #13 |
ninjette.org member
Name: George
Location: Ottawa, Canada
Join Date: Jun 2011 Motorcycle(s): EX250, C10 Concours Posts: 109
|
emulators / springs
The Concours has emulators and they work pretty well to reduce sharp bump harshness.
One frugal idea, you can make your stock springs stiffer by cutting them shorter. For example, if you cut them 25% shorter they become 25% stiffer, so 0.44 / 0.75 = 0.587 Kg/mm. You replace the cut off bit with a piece of pipe and a couple of washers. It is possible to go overboard on this and then the spring binds and that is probably undesirable. |
|
November 27th, 2012, 08:36 AM | #15 |
ninjette.org member
Name: Jim
Location: Jax, FL
Join Date: May 2012 Motorcycle(s): 2000 Ninjette, 98 CBR600, 98 VFR800, 2000 BMW R1100RS, Kymco Movie 150 Posts: 146
|
I'm a speeder, lol. The 0.70s with the recommended spacer gave me over 40 mm of sag. I put in a longer spacer and brought it down to about 35 mm. I was planning to try a little longer spacer, but I decided to sell the bike instead.
__________________________________________________
Jim Moore Jax, FL |
|
November 27th, 2012, 08:56 AM | #17 |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
So....... is the general consensus that .80 is too stiff for me?
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
November 27th, 2012, 09:01 AM | #18 |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
From the sonic springs site. I estimated my gear at ~ 15-20 lbs. Hopefully that's not too much. 90% of the time I have a tail bag, and 100% of the time I have a tank bag.
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
November 27th, 2012, 09:05 AM | #20 |
ninjette.org member
Name: Jim
Location: Jax, FL
Join Date: May 2012 Motorcycle(s): 2000 Ninjette, 98 CBR600, 98 VFR800, 2000 BMW R1100RS, Kymco Movie 150 Posts: 146
|
Throw 'em in there. See if you like it. Swapping springs is simple once you see it done.
__________________________________________________
Jim Moore Jax, FL |
|
November 27th, 2012, 09:06 AM | #21 |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
What rate would you suggest for me?
What is our stock spring rate anyways? I'm also wondering if the emulators will help to "mitigate" the "overly stiff" spring? I'll pick up another set of springs if need be and sell these.
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
November 27th, 2012, 09:09 AM | #22 | |
sail away
Name: Jon
Location: San Jose
Join Date: Jul 2012 Motorcycle(s): gixxer (sold), ninjette (upgrade!) Posts: 964
Blog Entries: 8
|
Quote:
I feel like the sonic springs calculator has an oddity. Varying your body weight 10 or 20 pounds doesn't seem to change the recommended spring rate when it seems like it should. Try the race tech calculator for a second opinion. |
|
|
November 27th, 2012, 09:13 AM | #23 | |
sail away
Name: Jon
Location: San Jose
Join Date: Jul 2012 Motorcycle(s): gixxer (sold), ninjette (upgrade!) Posts: 964
Blog Entries: 8
|
Quote:
0.44 stock per faq no, I am pretty sure they do different things. I'm with Jim on this one. Throw em in and see how it reacts. Changing them is really easy. |
|
|
November 27th, 2012, 09:14 AM | #24 |
ninjette.org member
Name: Jim
Location: Jax, FL
Join Date: May 2012 Motorcycle(s): 2000 Ninjette, 98 CBR600, 98 VFR800, 2000 BMW R1100RS, Kymco Movie 150 Posts: 146
|
The stock springs are 0.44 according to RaceTech. That's way too soft. I'm not sure who they were building the bike for, but that's ridiculous. The 0.8 may be a little stiff for you, but it's within well the reasonable range. You can compensate with a shorter spacer. All you're trying to do is get approximately 30 mm of sag. As long as your springs are close (which you are with the 0.8s) it doesn't really matter if you do it with a stiffer spring and less preload (shorter spacer) or a softer spring and more preload (longer spacer).
__________________________________________________
Jim Moore Jax, FL |
|
November 27th, 2012, 09:23 AM | #25 | |
sail away
Name: Jon
Location: San Jose
Join Date: Jul 2012 Motorcycle(s): gixxer (sold), ninjette (upgrade!) Posts: 964
Blog Entries: 8
|
Quote:
|
|
|
November 27th, 2012, 09:32 AM | #26 |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
racetech recommended .70
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
November 27th, 2012, 09:42 AM | #27 |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
If I installed emulators, new oil (still need to know what weight; i believe stock is 15?), and the .8 springs at the same time, and find the springs too stiff, will I have to remove the emulators and oil to change to a softer spring?
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
November 27th, 2012, 09:43 AM | #28 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
I believe you will just have to remove the springs... Not sure about the oil, but there will be no need to remove the emulators...
|
|
November 27th, 2012, 09:50 AM | #29 |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
Thanks for the info Hans.
"Fork oil" is just normal oil right?
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
November 27th, 2012, 09:55 AM | #30 |
Fast-Guy wannabe
Name: Jason
Location: Brentwood, Ca
Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot.
MOTM - Jan '13
|
Are the 2008+ springs stiffer then the pregens?
|
|
November 27th, 2012, 09:55 AM | #31 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
You get special fork oil to put in your forks... If you have it available, I'd recommend that. It's not TOO expensive. Just look on amazon/eBay.
|
|
November 27th, 2012, 09:57 AM | #32 |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
I believe they are... .63 as opposed to .44... I've bought .70 for my newgen and I weigh about 155lbs without gear.
|
|
November 27th, 2012, 10:13 AM | #33 |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
Based on your numbers here, it would seem .8 might be a little stiff. Is it really as simple as compensating with a shorter spacer?
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
November 27th, 2012, 10:19 AM | #34 |
Fast-Guy wannabe
Name: Jason
Location: Brentwood, Ca
Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot.
MOTM - Jan '13
|
No there is an optimal range for the amount of preload you want to apply to a spring, to much or to little will not work as it was intended. You can also mix spring rates if you have a second set like a .80 on the left and a .70 in the right to make a .75 setup. The same can be done with different wieght fork oils.
|
|
November 27th, 2012, 10:22 AM | #35 |
Fast-Guy wannabe
Name: Jason
Location: Brentwood, Ca
Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot.
MOTM - Jan '13
|
When I talk to race tech about a custom spring for my NSR they told me if I didn't like what they recommended then they would trade me out for a different set. They quite nice so you may want to talk to them direct and ask someone like Dave moss just tell him Jason Perez sent you.
|
|
November 27th, 2012, 10:26 AM | #36 | |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
Quote:
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
|
November 27th, 2012, 10:31 AM | #37 | |
ninjette.org certified postwhore
Name: Hansveer
Location: Bombay, India
Join Date: Jan 2012 Motorcycle(s): Ninja 250r - Track whore, Ninja 300 - SOLD, KTM RC390 - Orange Hulk, Ducati 899 Panigale - Red Devil. Posts: A lot.
|
Quote:
|
|
|
November 27th, 2012, 10:34 AM | #38 | |
Fast-Guy wannabe
Name: Jason
Location: Brentwood, Ca
Join Date: Oct 2011 Motorcycle(s): 2009 Ninja250, 2011 RM-Z250, 2004 NSR50, Posts: A lot.
MOTM - Jan '13
|
Quote:
But really some Superbike have only compression valves in the left and rebound valves in the right. That is why we have upper AND lower triple clamps, they keep everything inline. Given a 250 doesn't have the same level of bracing as a 1000ss it is still stiff enough to handle a difference in springs of at least .15 |
|
|
November 27th, 2012, 10:34 AM | #39 | |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Quote:
It's how Yamaha and other manufacturers have the compression adjustment in one fork leg, and the rebound in the other. The different forks are actually controlling completely different things. This isn't a cost-saving measure, they do the exact same thing in their $M+ GP bikes. EDIT: What Jason said.
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
|
November 27th, 2012, 10:54 AM | #40 |
ninjette.org certified postwhore
Name: Rick
Location: Napa, CA
Join Date: Sep 2012 Motorcycle(s): 2005 ZX6R, 2011 Sprint GT Posts: A lot.
|
That's freakin cool. Sorry for doubting you lol, I'm sure you can see where I might have had reservations about that.
Would it be unwise to have a stock .44 on the right and a .8 on the left? Not sure if they need to be closer values.
__________________________________________________
"The enemy is fear. We think it is hate, but it is fear." - Gandhi |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
'94+ EX500 fork tubes and valve emulators in an EX250J? | CZroe | 2008 - 2012 Ninja 250R Tech Talk | 1 | February 7th, 2013 10:12 PM |
Just picked up some gold valve emulators | psych0hans | 2008 - 2012 Ninja 250R Tech Talk | 2 | July 17th, 2012 11:34 AM |
Gold Valve Emulators | KChatham | 2008 - 2012 Ninja 250R Tech Talk | 4 | January 4th, 2012 11:03 PM |
Front fork Valve Emulators? | empire00 | 2008 - 2012 Ninja 250R Tech Talk | 5 | July 21st, 2009 01:30 PM |
|
|