March 7th, 2010, 02:44 PM | #1 |
ninjette.org member
Name: David
Location: Waxahachie
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250r SE green with Monster energy decals!!! Posts: 223
|
Does the Targa Fender Eliminator use OEM connectors?
This Fender eliminator uses stock signals which is what I want but how do you get the license plate light hooked up? is there any splicing involved? I'm not very mechanically inclined so I know this is a stupid question. If anyone has the fender eliminator could you let me know? also do you just take the stock fender off and bolt this one in its place?
http://cgi.ebay.com/ebaymotors/ws/eB...d=350318958987 Also what is a good fender eliminator that cost less and uses OEM connectors and requires no cutting? |
|
March 7th, 2010, 04:13 PM | #2 |
Psychic war veteran
Name: Thomas
Location: Norfolk, VA
Join Date: May 2009 Motorcycle(s): Kawi Green '09 Ninja ZX6R Posts: 663
|
Cut the factory wires and splice. They're basically giving you one of the LED bolts. There are better, brighter solutions for under $10, if something like that matters to you.
__________________________________________________
* If you're arguing with some idiot over the internet, chances are pretty good he's doing the same thing! Zodiac Mindwarp and the Love Reaction |
|
March 7th, 2010, 08:27 PM | #3 |
ninjette.org member
Name: David
Location: Waxahachie
Join Date: Dec 2009 Motorcycle(s): 2009 Ninja 250r SE green with Monster energy decals!!! Posts: 223
|
ok then where can I go to get a LED light that uses factory connections and fits the Targa fender eliminator for under $10?
|
|
March 7th, 2010, 08:35 PM | #4 |
ninjette.org certified postwhore
Name: Rick
Location: Alexandria, Louisiana
Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much.
MOTY - 2017, MOTM - Jan '19, Oct '16, May '14
|
To my knowledge you won't find a "plug-n-play" so you will have to splice them into the factory wires. When you remove the factory tail, cut the wires going to the license plate light as close to the light as possible to give you plenty of wire left to splice into your new led license plate lights.
|
|
March 7th, 2010, 10:32 PM | #5 |
ninjette.org member
Name: Chris
Location: Upstate NY
Join Date: Dec 2009 Motorcycle(s): 2007 Kawi Ninja 250 Posts: 31
|
use posi-locks for the splicing. All you need is a wire cutter. no real splicing skill required.
__________________________________________________
2007 250 | Shoei Camino RF-1000 | Cortech FSX Series 2 Jacket | Castle Sport Mesh Gloves | Joe Rocket Manta Tailbag | Fieldsheer Lid Pack | Fender Eliminator | Integrated & Flush Mount Turn Signals |
|
March 11th, 2010, 12:56 PM | #6 |
ninjette.org sage
Name: aj
Location: New York / PA
Join Date: Jul 2009 Motorcycle(s): Red 09 Ninja 250r aka Sheila (RIP), Red '10 Ninja 250r aka Sasha (Sold), White '13 Ninja 300 (To be Purchased) Posts: 855
|
never heard of posi-locks, look legit though and very easy to use, so give them a go. I 'll def have to try them one day. Sometimes I think I rather solder and shrinkwrap though.
__________________________________________________
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[sportrider - latest stories] - Targa CBR250R Fender Eliminator Kit | SR Tested | Ninjette Newsbot | Motorcycling News | 0 | June 19th, 2013 02:10 PM |
[sportrider - latest stories] - Targa Sportbike Tail Kit (Fender Eliminator) for the | Ninjette Newsbot | Motorcycling News | 0 | December 18th, 2012 02:40 PM |
TARGA fender eliminator kit. | thurt88 | 2008 - 2012 Ninja 250R Farkles | 11 | July 1st, 2012 05:47 AM |
Targa fender eliminator problem | play2pwn | 2008 - 2012 Ninja 250R Farkles | 11 | March 31st, 2011 05:53 PM |
[2fiddy.com] - Targa Fender Eliminator | Ninjette Newsbot | Motorcycling News | 0 | August 19th, 2008 03:38 PM |
|
|