May 21st, 2017, 04:34 PM | #1 |
ninjette.org member
Name: Jacob
Location: Cleveland
Join Date: May 2017 Motorcycle(s): 2012 Ninja 250r Posts: 11
|
how do I fix this fairing?
The right fairing on my new bike is bent at the bottom. It looks like it overheated or something. Can I fix this or at least get it flat again?
I thought that maybe I could hit it with a heat gun and just bend it back, but I'm not sure if that would work. Any advice is appreciated! |
|
May 21st, 2017, 06:00 PM | #2 |
ninjette.org sage
Name: David
Location: Loves Park, IL
Join Date: Feb 2011 Motorcycle(s): Time will tell Posts: 969
|
Heatgun is your best bet. It's ABS, so it should be fairly predictable, just don't go too crazy and boil the paint.
|
|
May 21st, 2017, 07:39 PM | #3 |
ninjette.org certified postwhore
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot.
MOTY - 2018, MOTM - Nov '17
|
Be sure to focus heat on the folded corner on both sides. Leave the protruding flat part alone. Test bending tab after 5-minutes. Add more heat as necessary.
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
So how can I fix this? | Ninja Rob | General Motorcycling Discussion | 11 | May 29th, 2016 08:36 PM |
How do I fix this | karanj94 | 2008 - 2012 Ninja 250R Farkles | 46 | June 25th, 2015 05:55 PM |
cracked fairing? broken tabs? plastic fix paint prep how-to as requested | breebles | 1986 - 2007 Ninja 250R Farkles | 26 | October 9th, 2013 02:55 AM |
Help Me Fix This Fairing | miss_syn | 2008 - 2012 Ninja 250R Tech Talk | 14 | March 16th, 2012 01:06 PM |
How can I fix this? | the big mike | 2008 - 2012 Ninja 250R Tech Talk | 18 | August 25th, 2011 10:23 AM |
|
|