June 7th, 2011, 01:50 AM | #41 |
Texas Newbie
Name: John
Location: D/FW Texas
Join Date: Sep 2010 Motorcycle(s): 07 Ninja EX250, 07 FZ6 Posts: A lot.
|
I did some speed runs this weekend... At one point I was running flat out at 12,000 rpms for about 3miles, and the speedo was reading 110mph... That was all the power I could squeeze out of her... The wind speed was about 5mph and calm...
When I look at the gps it was reading 98.9mph top speed...(fast enough for me) |
|
June 7th, 2011, 11:14 AM | #42 |
ninjette.org member
Name: Braydan
Location: Saskatchewan
Join Date: Mar 2011 Motorcycle(s): Kawasaki ZZR 250 Posts: 39
|
When does the rev limiter kick in?? I have a 2006 ZZR 250 that redlines at 13000 but it pushes past that 13000. I lost my nerve at about 13500ish... maybe 14000...
|
|
June 7th, 2011, 08:08 PM | #43 |
Texas Newbie
Name: John
Location: D/FW Texas
Join Date: Sep 2010 Motorcycle(s): 07 Ninja EX250, 07 FZ6 Posts: A lot.
|
The bike would not go to 13k rpm... (I tried)
It ran easy just past 12k rpm... I'm 185- 190lbs in full gear... |
|
June 9th, 2011, 06:09 PM | #44 |
ninjette.org guru
Name: Aaron
Location: Gone riding.
Join Date: Mar 2010 Posts: 389
|
YASKo, when your ready to go up on one, rev the lady up to 9krpm with the clutch pulled in then drop the clutch while giving some gas. Keep your right foot over the brake pedal. When you want to come back down, tap the rear brak gently.
|
|
June 17th, 2011, 05:49 PM | #45 |
Ridin Dirty
Name: Ed
Location: Delaware
Join Date: Jun 2011 Motorcycle(s): 2011 white se 250r , 2008 zx6R Posts: 921
|
the day i picked my bike up the guy who rode it out of the dealership and cleaned it up and all said try not going above 8k rpms until around 5-600 miles first oil change.. never riding a 250 i was like..ok! well i jump on the hwy about a mile down the road and im like this isnt gonna work.. with 3miles on the bike i was up in the 10k rpm just keeping up with traffic..loL!
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Losing power, top speed is ~70 at 9,000rpm, WHAT'S GOING ON??? | Ninjettepgh | 1986 - 2007 Ninja 250R Tech Talk | 49 | July 7th, 2012 09:54 AM |
[visordown.com] - BMW S1000RR to be limited at 9,000rpm until first service | Ninjette Newsbot | Motorcycling News | 0 | March 4th, 2010 12:30 PM |
|
|