pre-gen tach on an 08??

almost40 · July 5th, 2009, 05:17 PM

Has anyone pulled the pre-gen dash and taken it apart??

Can you pull the tach and mount it in a custom made plate??

Will the pre-gen tach work on an 08???

The reason I ask is I would like to pull the dash on my 08 and install a custom aluminum plate to hold a tach and a temp gauge. (thats all I need for the track) I was just curious if this is even workable??

Snake · July 5th, 2009, 05:50 PM

I don't see why it would not work since the engines are almost identical.

ASecretNinja · August 26th, 2009, 03:59 PM

Quote:

Originally Posted by almost40

Has anyone pulled the pre-gen dash and taken it apart??

The reason I ask is I would like to pull the dash on my 08 and install a custom aluminum plate to hold a tach and a temp gauge. (thats all I need for the track) I was just curious if this is even workable??

Car = dash(board)
Motorcycle = instrument cluster.

g21-30 · September 16th, 2009, 06:09 PM

I think the '88-94 will work, since the '88-94 CDI works!

July 5th, 2009, 05:17 PM	#1
almost40 ninjette.org Monkey Spank Name: Kevin Location: Illinois Join Date: Apr 2009 Motorcycle(s): 2008 250R Track-Bike Woodcraft clip-ons and rearsets FZ-6 track bike Posts: A lot.	pre-gen tach on an 08?? Has anyone pulled the pre-gen dash and taken it apart?? Can you pull the tach and mount it in a custom made plate?? Will the pre-gen tach work on an 08??? The reason I ask is I would like to pull the dash on my 08 and install a custom aluminum plate to hold a tach and a temp gauge. (thats all I need for the track) I was just curious if this is even workable?? __________________________________________________ Black 250R Full Area P QC Dyno Jet Kit 100 main 41T Rear Sprocket

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New-gen engine in Pre-gen frame. Oil leak under exhaust ports.	AFazakerley	2008 - 2012 Ninja 250R Tech Talk	11	June 5th, 2016 02:03 PM
Fitting a new gen front wheel on a pre gen?	thumper64	1986 - 2007 Ninja 250R Tech Talk	13	November 6th, 2013 02:44 PM
Bike size, new gen vs pre gen(zzr)	bowerbird100	General Motorcycling Discussion	6	August 1st, 2013 05:49 PM
Pre-gen (2007 and older) and "new pre-gen" (2008-2012) frames	kjohng	General Motorcycling Discussion	5	February 27th, 2013 10:03 AM
FS/ part out new gen and pre gen 250r ninja	carlos	Motorcycle-related	3	May 14th, 2012 10:25 PM

July 5th, 2009, 05:50 PM	#2
Snake ninjette.org certified postwhore Name: Rick Location: Alexandria, Louisiana Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much. MOTY - 2017, MOTM - Jan '19, Oct '16, May '14	I don't see why it would not work since the engines are almost identical.

September 16th, 2009, 06:09 PM	#4
g21-30 ninjette.org certified postwhore Name: Sam Location: Northern Virginia Join Date: Nov 2008 Motorcycle(s): Ninja 250R 2009 Posts: A lot.	I think the '88-94 will work, since the '88-94 CDI works!