Whose bike is this? Single-sided swingarm, dual discs, Ducati-tail, etc.

CZroe · June 24th, 2011, 02:11 PM

OK, who's bike is this?!

Red with lowered front, upgraded forks, clip-ons, dual-disc front brake, flush-mount turn signals, single-sided swingarm with hugger, deleted passenger pegs, red chain and sprockets, adjustable shock, aftermarket rearsets, and various other trim bits and bobs (aluminum frame caps, rim tape, shiny coating on side panels and gauge shroud, frame sliders, tank pad, levers, windscreen, etc)

That Ducati tail looks a bit different than the pointy one I've seen from Indonesia. I want!

CynicalC · June 24th, 2011, 02:15 PM

Where did you get that picture from?

maraci · June 24th, 2011, 02:28 PM

Such a beauty. I have the same ducati tail on my ninja, except green. I'll try posting pics later when I get my sister's camera.
not sure who's it is though!

DarC · June 24th, 2011, 02:30 PM

Where can such a tail be had? I really like it...

Liquidtoon · June 24th, 2011, 02:46 PM

Looks like the one linked here, though I dont speak Indonesian.
about half way down is a quoted section of photos.

phr3ek · June 24th, 2011, 03:56 PM

fyi any and every heavily modded 250 is from indonesia

there is a shop out there that specializes in putting super sexy stuff on 250s scooters and other 2 wheeled vehicles

i think sportisi has a couple bikes floating around the interwebs that they built
you can ask ztrack or sportisi themselves

CZroe · June 24th, 2011, 08:42 PM

Quote:

Originally Posted by CynicalC

Where did you get that picture from?

Ninjette.org flash page. Perhaps someone can run it through Tin Eye and see what turns up. I can't do it from here (work).

Quote:

Originally Posted by Liquidtoon

Looks like the one linked here, though I dont speak Indonesian.
about half way down is a quoted section of photos.

*snip*

Unlike the OP, that tail is hook-like and has a seat.

ichibunkid.206 · June 24th, 2011, 10:30 PM

question... would the parts that fit the 250 bikes in Indonesia fit our 250's here in the states? and I'm talking body parts, like the undertail.

I have a friend living in Indonesia, and another I see every now and than here in the states... i thought maybe they could source parts over there for me, provided it didn't cost an arm and a leg to ship them state side. Got to say I'm liking how that rear end looks

phr3ek · June 24th, 2011, 11:28 PM

Quote:

Originally Posted by ichibunkid.206

question... would the parts that fit the 250 bikes in Indonesia fit our 250's here in the states? and I'm talking body parts, like the undertail.

I have a friend living in Indonesia, and another I see every now and than here in the states... i thought maybe they could source parts over there for me, provided it didn't cost an arm and a leg to ship them state side. Got to say I'm liking how that rear end looks

ask ztrack159 on this forum, he is state-side and i believe he has a ducati tail for the 250
last i checked he got back the one he sold b4, but not sure if he still has it or resold again

he should also know how much shipping is since he's the liaison/US vendor for sportisimoto (indonesian company)

CZroe · June 25th, 2011, 12:47 AM

Quote:

Originally Posted by phr3ek

ask ztrack159 on this forum, he is state-side and i believe he has a ducati tail for the 250
last i checked he got back the one he sold b4, but not sure if he still has it or resold again

he should also know how much shipping is since he's the liaison/US vendor for sportisimoto (indonesian company)

He only imported one and sold it to Tiggen in Canada, who installed it (didn't ship it back AFAIK). He said he wouldn't be importing any more of those.

Snake · June 25th, 2011, 04:06 AM

Sweet looking bike.

ichibunkid.206 · June 25th, 2011, 08:06 AM

[QUOTE=Liquidtoon;314372]Looks like the one linked here, though I dont speak Indonesian.
about half way down is a quoted section of photos.

I'll forward the link to my friends and see if they can translate, unfortunately the thread is over a year old... so sourcing the ducati undertail maybe a lost cause, but what the hell.....

Kevin2109 · June 25th, 2011, 12:45 PM

http://translate.google.com/translat...%3Ft%3D6142719

phr3ek · June 25th, 2011, 02:18 PM

Quote:

Originally Posted by CZroe

He only imported one and sold it to Tiggen in Canada, who installed it (didn't ship it back AFAIK). He said he wouldn't be importing any more of those.

edit: yup, you're right, looked up manitoba (license plate) and that is canadaland

http://www.kawiforums.com/ninja-250r...ack-stock.html

bike got sold and new owner wanted stock tail
so matt did an exchange

here's other heavily modified 250s
http://www.kawiforums.com/ninja-250r...indonesia.html

CZroe · June 25th, 2011, 04:26 PM

Quote:

Originally Posted by phr3ek

edit: yup, you're right, looked up manitoba (license plate) and that is canadaland

http://www.kawiforums.com/ninja-250r...ack-stock.html

bike got sold and new owner wanted stock tail
so matt did an exchange

here's other heavily modified 250s
http://www.kawiforums.com/ninja-250r...indonesia.html

I see. I had asked him for one before Tiggen but he had a green bike and the first one Matt could source was green. Because of that I got bumped to second in line but because it cost him so much to import he decided not to do it again and I missed my chance. If I knew it was available again I would have bought it and had it painted. AFAIK, it's the only one in North America.

phr3ek · June 25th, 2011, 04:47 PM

why dont you ask matt if he still has it on hand and if he's willing to sell it to you

or you can just find a fiberglass guy and have him retro fit a normal duc tail

wayanlam · June 25th, 2011, 08:44 PM

the translation for that indo forum thread is basically just saying he wants to sell the bike for 42 million Rp.

no info about the duc. tail

if no one is able to find a source for it, i could have a look into it~

wayanlam · June 25th, 2011, 08:47 PM

for the actual suspensions etc. they spend a fortune on those mods. just recently someone chaged both the back swingarms and front suspension with double disc, etc. and spent about 3.500 US$

a little insane in my books, lol

phr3ek · June 25th, 2011, 10:05 PM

fyi for ppl who want to source stuff out of indonesia, shipping will be expensive and long, $100+ with roughly 3-4 week wait

wayanlam · June 25th, 2011, 11:32 PM

express postage takes 7 to 10 days.

DHL is 5 to 7 days.

price is expensive... yes.

phr3ek · June 26th, 2011, 12:11 AM

Quote:

Originally Posted by wayanlam

express postage takes 7 to 10 days.

DHL is 5 to 7 days.

price is expensive... yes.

lol, for some reason i didnt think about DHL

i just thought about ocean freight

CZroe · June 26th, 2011, 01:11 AM

Quote:

Originally Posted by phr3ek

why dont you ask matt if he still has it on hand and if he's willing to sell it to you

or you can just find a fiberglass guy and have him retro fit a normal duc tail

Because I ended up buying an undertail from him and an integrated tail light to go with that. Half the reason I wanted it was to kill three birds with one stone (undertail, cowl, and fender eliminator). I'm workin' on the cowl next.

June 24th, 2011, 10:30 PM	#8
ichibunkid.206 ninjette.org member Name: Phil Location: Seattle Join Date: May 2011 Motorcycle(s): 2011 Ninja 250R Posts: 190	question... would the parts that fit the 250 bikes in Indonesia fit our 250's here in the states? and I'm talking body parts, like the undertail. I have a friend living in Indonesia, and another I see every now and than here in the states... i thought maybe they could source parts over there for me, provided it didn't cost an arm and a leg to ship them state side. Got to say I'm liking how that rear end looks __________________________________________________ ATGATT Quote Wild Hogs - Woody: "May be I don't want to wear a helmet, Maybe I don't want anything between me and the road" Bobby: "You will if your head falls on it"

June 25th, 2011, 08:06 AM	#12
ichibunkid.206 ninjette.org member Name: Phil Location: Seattle Join Date: May 2011 Motorcycle(s): 2011 Ninja 250R Posts: 190	[QUOTE=Liquidtoon;314372]Looks like the one linked here, though I dont speak Indonesian. about half way down is a quoted section of photos. I'll forward the link to my friends and see if they can translate, unfortunately the thread is over a year old... so sourcing the ducati undertail maybe a lost cause, but what the hell..... __________________________________________________ ATGATT Quote Wild Hogs - Woody: "May be I don't want to wear a helmet, Maybe I don't want anything between me and the road" Bobby: "You will if your head falls on it"

June 25th, 2011, 12:45 PM	#13
Kevin2109 KThanksBye Name: Kevin Location: Orange County Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.	http://translate.google.com/translat...%3Ft%3D6142719 __________________________________________________ ----> My Youtube! <---- Unregistered, watch my youtube page!

June 25th, 2011, 08:44 PM	#17
wayanlam ninjette.org certified postwhore Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.	the translation for that indo forum thread is basically just saying he wants to sell the bike for 42 million Rp. no info about the duc. tail if no one is able to find a source for it, i could have a look into it~ __________________________________________________ Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield

June 25th, 2011, 08:47 PM	#18
wayanlam ninjette.org certified postwhore Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.	for the actual suspensions etc. they spend a fortune on those mods. just recently someone chaged both the back swingarms and front suspension with double disc, etc. and spent about 3.500 US$ a little insane in my books, lol __________________________________________________ Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield

June 24th, 2011, 02:15 PM	#2
CynicalC ninjette.org certified postwhore Name: Colin Location: Bay Area Join Date: Feb 2011 Motorcycle(s): '96 EX250 Posts: A lot.	Where did you get that picture from?

June 24th, 2011, 02:28 PM	#3
maraci ninjette.org member Name: Alex Location: Winnipeg Join Date: Mar 2011 Motorcycle(s): 2008 Green Ninja 250r Posts: 58	Such a beauty. I have the same ducati tail on my ninja, except green. I'll try posting pics later when I get my sister's camera. not sure who's it is though!

June 24th, 2011, 02:30 PM	#4
DarC DUCEATR Name: Dan Location: El Paso, Texas Join Date: Apr 2011 Motorcycle(s): RVT1000R Posts: 628	Where can such a tail be had? I really like it...

June 24th, 2011, 02:46 PM	#5
Liquidtoon ninjette.org member Name: Josh Location: Sacramento, Ca Join Date: Jul 2010 Motorcycle(s): 09 Ninja 250r Posts: 215	Looks like the one linked here, though I dont speak Indonesian. about half way down is a quoted section of photos.

June 24th, 2011, 03:56 PM	#6
phr3ek meow? Name: kevin Location: I.E. SoCal Join Date: Feb 2011 Motorcycle(s): 2004 636 Posts: 587	fyi any and every heavily modded 250 is from indonesia there is a shop out there that specializes in putting super sexy stuff on 250s scooters and other 2 wheeled vehicles i think sportisi has a couple bikes floating around the interwebs that they built you can ask ztrack or sportisi themselves

June 25th, 2011, 04:06 AM	#11
Snake ninjette.org certified postwhore Name: Rick Location: Alexandria, Louisiana Join Date: Jan 2009 Motorcycle(s): 05 Blue Ninja 250 Posts: Too much. MOTY - 2017, MOTM - Jan '19, Oct '16, May '14	Sweet looking bike.

June 25th, 2011, 04:47 PM	#16
phr3ek meow? Name: kevin Location: I.E. SoCal Join Date: Feb 2011 Motorcycle(s): 2004 636 Posts: 587	why dont you ask matt if he still has it on hand and if he's willing to sell it to you or you can just find a fiberglass guy and have him retro fit a normal duc tail

June 25th, 2011, 10:05 PM	#19
phr3ek meow? Name: kevin Location: I.E. SoCal Join Date: Feb 2011 Motorcycle(s): 2004 636 Posts: 587	fyi for ppl who want to source stuff out of indonesia, shipping will be expensive and long, $100+ with roughly 3-4 week wait

June 25th, 2011, 11:32 PM	#20
wayanlam ninjette.org certified postwhore Name: Wayan Location: Bali - Indonesia Join Date: Apr 2009 Motorcycle(s): 2014 Z250 Posts: A lot.	express postage takes 7 to 10 days. DHL is 5 to 7 days. price is expensive... yes. __________________________________________________ Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bike was low sided - where do I go from here?	Trailerboy531	!%@*#$%!)@#&!%@ I crashed!	18	July 28th, 2011 05:31 PM
Single swingarm new gen ninjette mod	richierich781	General Motorcycling Discussion	16	June 29th, 2009 04:57 PM
[hell for leather] - Tier Motorsports shows single-sided front hub on modified Yamaha	Ninjette Newsbot	Motorcycling News	0	December 9th, 2008 05:00 PM
[hell for leather] - BMW K1300S spied with single-sided front suspension	Ninjette Newsbot	Motorcycling News	0	July 23rd, 2008 11:01 AM