June 13th, 2011, 08:36 AM | #1 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Needles and Spools
Some questions....
1. To shim the needles in a pre-gen, is it the same DIY as the new gens? 2. What are my options to get swing arm spools on the pre-gen? I did try searching, but the shim needle thread I found pointed to the new gen DIY by kkim I couldn't find anything for pre-gen spools that didn't required a drill or welding. |
|
June 13th, 2011, 12:26 PM | #2 |
Join Date: Nov 2008 Posts: Too much.
|
shimming is the same for the pregen as it is for the newgen. the exact steps are different, of course, but the method is the same. anything in particular?
no spools for the pregen... that's why they have a centerstand. |
|
June 13th, 2011, 01:56 PM | #3 |
The Corner Whisperer
Name: Chris (aka Reactor)
Location: Northern KY
Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much.
MOTY 2015, MOTM - Nov '12, Nov '13
|
Thanks kkim for the shimming insight. Never been down that far in either of my 250's. If all goes well on the pregen, I will do the 2010. I am kinda waiting/wanting to ride out my warranty on that bike as well.
As far as the centerstand goes, it was removed when I bought it. So I have the choice of replacing the centerstand or install spools. I was leaning toward spools since I don’t have a centerstand for the other. |
|
June 13th, 2011, 02:05 PM | #4 |
Join Date: Nov 2008 Posts: Too much.
|
some pregen jetting info...
http://faq.ninja250.org/wiki/How_to_...e_your_jetting |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Needles and Clips | Ralgha | 2008 - 2012 Ninja 250R Tech Talk | 1 | October 17th, 2014 08:54 AM |
Stock Needles | icbm | 2008 - 2012 Ninja 250R Tech Talk | 6 | January 20th, 2012 04:13 PM |
Watch out for needles | CThunder-blue | Riding Skills | 1 | January 5th, 2011 11:05 AM |
Dynojet needles | iceman.kcmo | 1986 - 2007 Ninja 250R Tech Talk | 3 | April 29th, 2010 09:58 PM |
Different jets/needles? | kastas155 | 1986 - 2007 Ninja 250R Tech Talk | 0 | March 11th, 2010 03:26 PM |
|
|