September 13th, 2013, 03:07 AM | #1 |
ninjette.org member
Name: Dave
Location: CNY
Join Date: Apr 2012 Motorcycle(s): 2012 250R CLG Posts: 23
|
how to tell if this will fit??
|
|
September 13th, 2013, 06:26 AM | #2 |
Ninja Parts Master
Name: Dan
Location: Houma, Louisiana
Join Date: Aug 2013 Motorcycle(s): 2011 Ducati Streetfighter 1098, 2014 Honda CB1100 Cafe, 2007 SV1000S, Quite a few 2008-2012 Ninja 250s Posts: 366
|
It wont fit on a Ninja 250 handle bar. You would need to get aftermarket clip ons such as Woodcrafts to mount that. You need a bar thats hollow in order to install the rubber bushing into. Stock handlebars have a threaded nut that allows you to mount the stock barends. Many other stock 7/8" bars ARE hollow though, so maybe they WILL work for you if you are talking about a bike other than a Ninja 250.
See my video here: http://youtu.be/1khhRhv4_6c At the end of the video where we hold the end of the bar towards the camera you can see what im talking about.
__________________________________________________
Add me on Instagram: @d_jalb Or follow me on eBay: PartsNinja |
|
September 13th, 2013, 06:41 AM | #3 |
ninjette.org member
Name: Pete
Location: UK
Join Date: Aug 2012 Motorcycle(s): '11 250R SE (FI), '14 Daytona 675, '14 Sprint 1050 GT SE Posts: 121
|
Yes, I found out about the welded-in nut to my disappointment when I tried to fit these Oberon indicators:
http://www.oberon-performance.com/ac...ndicators.html My solution was to saw off the portion of the nut that protrudes past the end of the handlebar, then drill out the remainder of the nut to find the 19mm internal diameter pipe. I then drilled a small (5mm?) hole in the underside of the pipe at the triple tree end for the wire to come out of. It's possible, if you don't mind butchering your stock bars. It would be easier with clip-ons :-) HTH, Pete |
1 out of 1 members found this post helpful. |
September 13th, 2013, 09:27 AM | #4 |
ninjette.org member
Name: Dave
Location: CNY
Join Date: Apr 2012 Motorcycle(s): 2012 250R CLG Posts: 23
|
thanks, i think i'll give it a shot
|
|
September 13th, 2013, 12:41 PM | #5 |
dirty boy
Name: Joe
Location: Johnstown, PA
Join Date: Sep 2012 Motorcycle(s): I don't even know anymore?? Posts: A lot.
MOTM - Apr '14
|
if you can't beat it in with a hammer then I say it's a no go
__________________________________________________
I love the smell of burning pre-mix in the morning I don't think I'm a lot dumber than you thought that I think that I thought I was once. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How do you know the right fit? | NinjaCowgirl | Motorcycle Gear | 21 | January 10th, 2014 05:30 PM |
Do these mirrors fit? | quarterliter | 1986 - 2007 Ninja 250R Farkles | 13 | May 12th, 2013 04:08 PM |
Lower Cowling... To Fit or Not To Fit? | darqyn | 2008 - 2012 Ninja 250R Farkles | 4 | April 11th, 2012 05:56 AM |
how should your gear fit? | massacremasses | Motorcycle Gear | 2 | September 15th, 2011 06:46 PM |
How to Fit a Helmet | kkim | Motorcycle Gear | 1 | January 20th, 2010 01:24 AM |
|
|