Projekt D and DMP alignment

forevertwowheels · May 21st, 2011, 02:01 PM

I installed a projekt d fember eliminator and and dmp integrated taillight on my bike but they are not fitting together 100%. There is a gap on the right side and on top between the light and the stock flat black part. I was wondering if anyone else had this problem and how they fixed it. Thanks

Here's a not so great quality pic. ill put a better pic up later if i can.

DarC · May 23rd, 2011, 11:09 AM

The two piece housing is a pain. I loosened all the bolts and got things aligned, held in place with painters tape as needed and then slowly tightened everything together in place. Once I went with the once piece light housing I didn't have any issues and only had to center the light.

Play with the bushings holding your light and see if you can get the play to help take up and even out the gap.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alignment off?	APEmike	2013 - 2017 Ninja 300 Tech Talk	1	October 14th, 2014 07:32 PM
tire alignment	reroka	2008 - 2012 Ninja 250R Tech Talk	7	July 2nd, 2014 05:02 PM
FS: Smith Optics Projekt Sunglasses	tfkrocks	Miscellaneous	3	September 22nd, 2013 04:13 PM
Wheel alignment?	jack_bm	2008 - 2012 Ninja 250R Tech Talk	2	June 1st, 2012 03:56 PM
Projekt D Universal GPS mount for EX250J	CZroe	2008 - 2012 Ninja 250R Farkles	8	December 17th, 2009 01:41 AM

May 23rd, 2011, 11:09 AM	#2
DarC DUCEATR Name: Dan Location: El Paso, Texas Join Date: Apr 2011 Motorcycle(s): RVT1000R Posts: 628	The two piece housing is a pain. I loosened all the bolts and got things aligned, held in place with painters tape as needed and then slowly tightened everything together in place. Once I went with the once piece light housing I didn't have any issues and only had to center the light. Play with the bushings holding your light and see if you can get the play to help take up and even out the gap.