November 29th, 2011, 11:38 PM | #1 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
Helping a friend with a part out! Lots of stuff 08+ all for sale!!
Helping out a good friend
Figured I'd post this on this forum (belong to some 250 forums) in case some of you have 250's and in the event some parts may indeed fit or you're up to some custom work. Parts came off a 2008 Kawasaki Ninja 250R, should fit other 250 Ninja's in the '08-'12 range, and possibly the earlier generations, but that is upon you to make sure it fits. Shipping to the 48 States, prices do not include shipping, send zip code for quote, and I accept Paypal. Located near Alton, IL if you want to pickup locally and save on shipping costs. $225 - Black Rim, blue reflective tape (remove if you want), with new Arromax GT 501 130/70/17 tire. $Make ANY offer$ shipping will be about $125 - Frame, clean/clear title, "neck" is slight bent, small dent one bar (see pictures below), perfect if you know how to do metal work I don't. $75Headlight, one of the four tabs is slightly cracked (can barely see in picture below), but still mounts perfectly fine the way it is especially if you were to epoxy glue back together. $40 - Front Seat $30 -Rear Seat $15 - Left underseat fairing $Make Offer$ - Right underseat fairing, part of plastic peeled/cracked away (see picture below). $Make Offer$ - RPM Gauge and Fuel Gauge $20 - Left fairing, 3 cracks $5 - Left Rider peg (just the PEG) $35 - Left Passenger peg and bracket assembly $35 - Right Passenger peg and bracket assembly $10 - Gauge plate cover, has a tiny crack of the clear plastic window of the fuel gauge spot (far right) $80 - Complete lock set, one key, ignition still attached to triple tree, fuel tank cap/lock, and rear seat lock/cable. $35 - Swingarm $5 - Battery Tray $10 - Clutch lever $10 - 4 frame Caps $15 - Middle tail fairing, goes right behind seat/above tail light, minimal sun fade. $15 - Front brake caliber with line and brake lever has some damage $15 - Rear caliber with line $10 - Rear brake reservoir with line $20 - Fan Sensor $5 - Chain Guard $30 - Radiator Fan $10 - Coolant Tank $20 - Shifter Lever Assembly $25 - Underbody/Undertail Tray/Fairing $20 - OEM Kickstand with sensor $25 - Roaring Toyz lowering links (some scrapes on side that faced ground) $10 - Left clip on $20 - Engine Cover $30 - Fuel Tank Pictures: (The Speedometer gauge, the middle one in the picture, is sold) [IMG]http://i234.photobucket.com/albums/ee180/jvello15/2011-11- Please send Jvello15 PM's guys, I dont have time to focus on the thread. If you dont PM Jvello15 you loose sorry
__________________________________________________
----> My Youtube! <---- Unregistered, watch my youtube page! Last futzed with by Kevin2109; November 30th, 2011 at 11:39 PM. |
|
November 30th, 2011, 12:33 AM | #2 |
ninjette.org guru
Name: andy
Location: san gabriel
Join Date: Jan 2010 Motorcycle(s): 2007 Ninja 250 faster red Posts: 397
|
hummm...... these are good for the pre-gen conversion
|
|
November 30th, 2011, 12:47 AM | #3 |
Gear crash test dummy
Name: Max
Location: South Bay (So. Cal)
Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.
|
Hey Kevin, Alex and I agreed I might need a new return cable for my throttle since it wasn't rolling back. Ask your friend if if I can get the cables and for how much?
Also does he have the plastic piece that the complete gauge cluster sets in to that goes around the whole front of the bike? |
|
November 30th, 2011, 07:54 AM | #4 |
ninjette.org certified postwhore
Name: Colin
Location: Bay Area
Join Date: Feb 2011 Motorcycle(s): '96 EX250 Posts: A lot.
|
4 frame caps shipped to 94901?
__________________________________________________
Ç¥ñ頻| ßÿ Ñâ7µ®é. Äñt¡~§º¢Ïä| ßý Çhøî©è. |
|
November 30th, 2011, 07:57 AM | #5 |
CVMA #74 WSMC #750
Name: Nemesis
Location: On the track
Join Date: Oct 2009 Motorcycle(s): All of them Posts: A lot.
|
I'll take the fuel tank and swingarm. Please let him know.
|
|
November 30th, 2011, 08:48 AM | #6 |
ninjette.org certified postwhore
Name: Paul
Location: Roanoke, VA
Join Date: Jun 2009 Motorcycle(s): 2008 Candy Plasma Blue 250R Posts: A lot.
|
Crapsticks. An hour late, wanted to snag the tank since it's a color-match for me.
That said, I'd like to get the rear brake reservoir/line. Shipped to 24060 por favor
__________________________________________________
Proud member of the Blue Army Last futzed with by Momaru; November 30th, 2011 at 11:58 AM. |
|
November 30th, 2011, 08:48 AM | #7 |
Annoying gadfly
Name: Brian
Location: Cameron Park, CA
Join Date: Sep 2011 Motorcycle(s): 2006 Ninja EX250R Posts: 52
Blog Entries: 5
|
Darn. I need more fairing and I need the right side. Oh well.
__________________________________________________
Brian -- World domination through science! |
|
November 30th, 2011, 09:14 AM | #8 | |
ninjette.org sage
Name: Andy
Location: Sheboygan, WI
Join Date: Dec 2008 Motorcycle(s): 1988 Honda Hawk NT650, 1989 Honda Hawk NT650, 1997 GSXR750 Track Bike Posts: 890
|
Quote:
|
|
|
November 30th, 2011, 09:25 AM | #9 | |
Annoying gadfly
Name: Brian
Location: Cameron Park, CA
Join Date: Sep 2011 Motorcycle(s): 2006 Ninja EX250R Posts: 52
Blog Entries: 5
|
Quote:
I use the Protect All clamp-on cable lubing adaptor with LPS-2 lubricant for lubing cables. (I have used LPS-2 and LPS-3 extensively for decades on aircraft hinges and cables. Use LPS-2 for cables and linkages. Use LPS-3 for hinges and fixed fasteners you want to protect from water incursion so you can take them apart again later.)
__________________________________________________
Brian -- World domination through science! |
|
|
November 30th, 2011, 11:39 AM | #10 |
clutch
Name: nameless
Location: Maryland
Join Date: Jul 2011 Motorcycle(s): L1 GSXR600 Posts: 543
|
interested in fuel tank.
price shipped to 21701 please. thanks |
|
November 30th, 2011, 11:44 AM | #11 |
ninjette.org guru
Name: andy
Location: san gabriel
Join Date: Jan 2010 Motorcycle(s): 2007 Ninja 250 faster red Posts: 397
|
|
|
November 30th, 2011, 12:02 PM | #12 |
clutch
Name: nameless
Location: Maryland
Join Date: Jul 2011 Motorcycle(s): L1 GSXR600 Posts: 543
|
|
|
November 30th, 2011, 12:08 PM | #13 |
ninjette.org guru
Name: andy
Location: san gabriel
Join Date: Jan 2010 Motorcycle(s): 2007 Ninja 250 faster red Posts: 397
|
|
|
November 30th, 2011, 12:38 PM | #14 |
ninjette.org certified postwhore
Name: Sean
Location: Mary Esther, FL
Join Date: Jan 2009 Motorcycle(s): 2008 Ninja 250 1998 HD Road King Posts: A lot.
|
pm sent - front seat
__________________________________________________
http://sandollarmotorcycleclub.com/ |
|
November 30th, 2011, 01:15 PM | #15 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
Please send Jvello15 a PM guys, I dont have time to focus on the thread. If you dont PM Jvello15 you loose sorry
__________________________________________________
----> My Youtube! <---- Unregistered, watch my youtube page! Last futzed with by Kevin2109; November 30th, 2011 at 11:39 PM. |
|
November 30th, 2011, 11:35 PM | #16 |
ninjette.org member
Name: Jake
Location: Near St. Louis
Join Date: Nov 2011 Motorcycle(s): 2007 Ninja 650R Posts: 123
|
Hey guys, I am the one he's trying to help out. I am a member of the forum but haven't put in my 30 days yet. Feel free to PM me instead of Kevin. I'm waiting to get a hold of Kevin to have him edit in the thread that you guys can PM me as well but you can also take notice that the pictures from above came from my Photobucket account.
|
|
November 30th, 2011, 11:40 PM | #17 |
KThanksBye
Name: Kevin
Location: Orange County
Join Date: Mar 2011 Motorcycle(s): 2006 zx636r Posts: A lot.
|
Changed it for you jake! Good luck with the sale man, glad I could help out "thumbup:
__________________________________________________
----> My Youtube! <---- Unregistered, watch my youtube page! |
|
November 30th, 2011, 11:46 PM | #18 | |
ninjette.org member
Name: Jake
Location: Near St. Louis
Join Date: Nov 2011 Motorcycle(s): 2007 Ninja 650R Posts: 123
|
Quote:
Frame caps SOLD to CynicalC Also, for those who were interested in the fuel tank I'd like to apologize. For some reason it did not post the picture of the other side of the gas tank and it is dented. |
|
|
November 30th, 2011, 11:50 PM | #19 |
CVMA #74 WSMC #750
Name: Nemesis
Location: On the track
Join Date: Oct 2009 Motorcycle(s): All of them Posts: A lot.
|
I'll pass on the fuel tank. It's all yours guys. LMAO!!!
|
|
December 1st, 2011, 12:04 AM | #20 |
ninjette.org member
Name: Jake
Location: Near St. Louis
Join Date: Nov 2011 Motorcycle(s): 2007 Ninja 650R Posts: 123
|
|
|
December 1st, 2011, 12:05 AM | #21 |
ninjette.org guru
Name: andy
Location: san gabriel
Join Date: Jan 2010 Motorcycle(s): 2007 Ninja 250 faster red Posts: 397
|
haha.....
|
|
December 1st, 2011, 12:56 AM | #22 |
ninjette.org member
Name: Jake
Location: Near St. Louis
Join Date: Nov 2011 Motorcycle(s): 2007 Ninja 650R Posts: 123
|
then again what did you guys expect for a $30 gas tank lol
|
|
December 1st, 2011, 06:43 AM | #23 | |
ninjette.org certified postwhore
Name: Paul
Location: Roanoke, VA
Join Date: Jun 2009 Motorcycle(s): 2008 Candy Plasma Blue 250R Posts: A lot.
|
Quote:
Thanks for posting the update; afraid I'll be passing as well
__________________________________________________
Proud member of the Blue Army |
|
|
December 1st, 2011, 07:12 AM | #24 |
clutch
Name: nameless
Location: Maryland
Join Date: Jul 2011 Motorcycle(s): L1 GSXR600 Posts: 543
|
Were all passing. You messin up J. LOLOL
|
|
December 1st, 2011, 07:16 AM | #25 |
CVMA #74 WSMC #750
Name: Nemesis
Location: On the track
Join Date: Oct 2009 Motorcycle(s): All of them Posts: A lot.
|
I call bait and switch!
j/k Best wishes on the sale. |
|
December 1st, 2011, 07:45 AM | #26 | |
ninjette.org dude
Name: 1 guess :-)
Location: SF Bay Area
Join Date: Jun 2008 Motorcycle(s): '13 Ninja 300 (white, the fastest color!), '13 R1200RT, '14 CRF250L, '12 TT-R125LE Posts: Too much.
Blog Entries: 7
|
Quote:
__________________________________________________
Montgomery Street Motorcycle Club / cal24.com / crf250l.org / ninjette.org ninjette.org Terms of Service Shopping for motorcycle parts or equipment? Come here first. The friendliest Ninja 250R/300/400 forum on the internet! (especially Unregistered) |
|
|
December 1st, 2011, 07:52 AM | #27 |
ninjette.org sage
Name: Josh
Location: Lafayette Louisiana
Join Date: Aug 2011 Motorcycle(s): 2009 R6 Posts: 509
|
Still have the gauge face?
|
|
December 1st, 2011, 09:31 AM | #28 | |
ninjette.org member
Name: Jake
Location: Near St. Louis
Join Date: Nov 2011 Motorcycle(s): 2007 Ninja 650R Posts: 123
|
Quote:
Yes, jdoucet, I still have the guage face. Go ahead and send me a pm and I'll get it weighed and boxed up for an accurate shipping quote and hopefully we can get this in the mail today! |
|
|
December 1st, 2011, 01:27 PM | #29 |
Accesories Guru
Name: Dave
Location: Centreville, VA
Join Date: May 2011 Motorcycle(s): '99 EX250(Cafe/fighter project) Posts: 537
|
I would like to buy your rear brake disc, both calipers and the 4 frame caps. Also question about the wheel, is it a back or a front? you never specified.
|
|
December 1st, 2011, 01:33 PM | #30 |
ninjette.org member
Name: Jake
Location: Near St. Louis
Join Date: Nov 2011 Motorcycle(s): 2007 Ninja 650R Posts: 123
|
|
|
December 1st, 2011, 01:44 PM | #31 |
ninjette.org sage
Name: Josh
Location: Lafayette Louisiana
Join Date: Aug 2011 Motorcycle(s): 2009 R6 Posts: 509
|
Pm'd as well.
|
|
December 1st, 2011, 01:51 PM | #32 |
ninjette.org guru
Name: andy
Location: san gabriel
Join Date: Jan 2010 Motorcycle(s): 2007 Ninja 250 faster red Posts: 397
|
|
|
December 1st, 2011, 02:09 PM | #33 |
shaol1n ninja stuntman
Name: Jae
Location: Philly
Join Date: May 2011 Motorcycle(s): 2006 Yamaha YZF R6 Anniversary "Yoshiko" 2007 Honda CBR600RR "Katsumi"(SOLD) 2010 Ninja ZX-2R "JADE" (RIP) Posts: 726
|
hey is the clutch lever still available??? i need a replacement perch ASAP!
$10 plus whatever it costs to ship as fast as possible. pm me please
__________________________________________________
YOSHIKO 06 R6 Flushmount signals,Comp Werkes fender elim,GYTR Carbon Fiber Exhaust,Gold Shorty Levers,Shogun Frame Sliders,custom carbon fiber tank pad,white powder coated wheels,Dunlop Q2 tires |
|
December 1st, 2011, 02:23 PM | #34 | |
ninjette.org member
Name: Jake
Location: Near St. Louis
Join Date: Nov 2011 Motorcycle(s): 2007 Ninja 650R Posts: 123
|
Recently SOLD items:
Front Seat Rear Brake Reservoir Frame Caps Kickstand (sensor + bungee still available) Gauge face Rear rim BOTH passenger pegs/brackets Undertail/Undertray Left clip on Pending Sales BOTH Calipers & rear brake disc I will have to send messages to your email now. I guess there is a 20 private message limit and I have exceeded it and can not send anymore for the next 24 hours. Your total will be $17 shipped. PayPal to JakeAvello15@hotmail.com Edit: Received payment and taking to the post office now. Thanks Josh. Quote:
Last futzed with by Jvello15; December 8th, 2011 at 11:48 AM. Reason: Items sold |
|
|
December 1st, 2011, 05:45 PM | #35 |
ninjette.org certified postwhore
Name: Colin
Location: Bay Area
Join Date: Feb 2011 Motorcycle(s): '96 EX250 Posts: A lot.
|
oi oi oi hands off my frame caps!
__________________________________________________
Ç¥ñ頻| ßÿ Ñâ7µ®é. Äñt¡~§º¢Ïä| ßý Çhøî©è. |
|
December 1st, 2011, 07:20 PM | #36 |
Accesories Guru
Name: Dave
Location: Centreville, VA
Join Date: May 2011 Motorcycle(s): '99 EX250(Cafe/fighter project) Posts: 537
|
Blast you Cynical C, you have foiled me again!!!!
|
|
December 1st, 2011, 07:22 PM | #37 |
ninjette.org sage
Name: Josh
Location: Lafayette Louisiana
Join Date: Aug 2011 Motorcycle(s): 2009 R6 Posts: 509
|
Sweet! Ill finally have a green neutral light again instead of just a blinding white light!
|
|
December 2nd, 2011, 01:15 AM | #38 |
ninjette.org certified postwhore
Name: Colin
Location: Bay Area
Join Date: Feb 2011 Motorcycle(s): '96 EX250 Posts: A lot.
|
Seriously how many bikes are you building? You should have enough parts now for a fleet!
__________________________________________________
Ç¥ñ頻| ßÿ Ñâ7µ®é. Äñt¡~§º¢Ïä| ßý Çhøî©è. |
|
December 2nd, 2011, 10:09 AM | #39 |
Accesories Guru
Name: Dave
Location: Centreville, VA
Join Date: May 2011 Motorcycle(s): '99 EX250(Cafe/fighter project) Posts: 537
|
Just the one, I just keep coming up with ideas.
|
|
December 3rd, 2011, 12:00 AM | #40 |
ninjette.org member
Name: Jake
Location: Near St. Louis
Join Date: Nov 2011 Motorcycle(s): 2007 Ninja 650R Posts: 123
|
Rear rim was sold to abhijitz
Rear tire is now for sale! $90 OBO for damn near new Arromax GT 501 130/70/17 tire! (still has nubs) |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Helping out a LEO friend PLEASE pass this along! | garth285 | Off-Topic | 5 | October 28th, 2014 05:13 AM |
Helping a friend with a clutch plate problem! | skilletmo | 2008 - 2012 Ninja 250R Tech Talk | 109 | April 28th, 2013 06:09 PM |
helping a friend start her 250, quick battery question. | cerberusrex25 | 1986 - 2007 Ninja 250R Tech Talk | 15 | July 30th, 2012 07:38 PM |
Helping a friend out: water in exhaust! | EthioKnight | 2008 - 2012 Ninja 250R Tech Talk | 33 | July 23rd, 2012 06:15 PM |
Black 2009 bodywork (new) and LOTS of other stuff for 250s | RaceBikeRentals | Motorcycle-related | 84 | April 22nd, 2009 01:29 PM |
|
|