Pregen semi Partout (cheap)

bagtf3 · March 30th, 2013, 05:00 PM

I am in the midst of a pre gen track build and everything thing that I don't need, which is basically everything, is up for grabs. I have already sold some stuff on ebay, but here is a quick run down of the rest.

Note: All prices are + shipping from 63303 (St. Louis Area) and I have photos available if you'd like. BTW the bike was a '95.

Gauge cluster/bezel (8900 miles, clean) $30
Seat (decent shape, 1 tear) $25
Tail section with brake lights (black/purple) $25
Both mufflers, black $20 ea or $30 for both
Passenger pegs/exhaust hangers (really good shape) $15 ea or $25 for both

Complete wiring harness with fuse box $20
Rectifier (I think it works, refund if not) $25
Thermostat housing $10
Cooling fan $10
Ignition coils $20 for both

Throttle tube/cable $10
Front brake caliper $15
Front brake light sensor $5
Right side rear set $10
Rear shock $15

Headlight (really, really nice) $30
Turn signals $10 for the good one, $8 for one that has a chip in the plastic
Speedo sender $15 w/ cable, $10 w/o cable
Right side handle bar $20
Stator $30

16'' wheels/rotors (purple, if anyone wants them?) $15 ea
Rear dampener/cush drive $7
Probably have some other stuff... just ask.

Will do bundle pricing and combine to save shipping costs. Would be willing to trade for a spare pregen cylinder head or 17'' new gen wheels.

Also worth mentioning if anyone wants their pregen forks re-sprung, I'll do that. I have the fork seal driver. Just did mine today. PM for details. Email: bgoggin88@gmail.com

bagtf3 · April 13th, 2013, 10:01 AM

Ignore all those prices and make an offer. I need this stuff goooooonnne.

!!(0_o)!! · April 13th, 2013, 10:13 AM

Do you have the rear brake caliper?

EDIT: do you still have the wheels as well?

choneofakind · April 13th, 2013, 02:35 PM

@lolibater, you wanted to do a bixenon retrofit right? Here's your chance dude. See how low bagtf3 will go on the headlight. I can help you source the rest of the parts for your retrofit and walk you through it on here.

CZroe · April 18th, 2013, 07:25 PM

Is the stator included with a left side engine case/cover?

krolinked · April 19th, 2013, 04:33 PM

Pics of the rearset? Can you fit it into a 5$ small flat rate box?

illninja · April 22nd, 2013, 08:59 AM

Left exhaust

daisha · April 22nd, 2013, 09:43 AM

I need a turn signal. Also, has someone claimed the wheels?

CZroe · April 23rd, 2013, 06:06 PM

OP: Did you get 17" newgen wheels installed or something?

bagtf3 · April 24th, 2013, 07:45 PM

PMs replied... All is sold but a spare cylinder head and forks/triple/rebuild kit and .80 rate sonic springs.

I did fit 17'' wheels but they weren't off a new gen... it was pretty trick if you ask me. I think I took a picture before I sold it as a roller to a track guy.

05Ninjette89 · May 3rd, 2013, 07:06 PM

Selling your stock brake/clutch levers?

March 30th, 2013, 05:00 PM	#1
bagtf3 ninjette.org member Name: Bryan Location: St. Louis Join Date: Feb 2013 Motorcycle(s): '06 GSXR 1K, '03 YZ450F, 95 EX250 Posts: 40	Pregen semi Partout (cheap) I am in the midst of a pre gen track build and everything thing that I don't need, which is basically everything, is up for grabs. I have already sold some stuff on ebay, but here is a quick run down of the rest. Note: All prices are + shipping from 63303 (St. Louis Area) and I have photos available if you'd like. BTW the bike was a '95. Gauge cluster/bezel (8900 miles, clean) $30 Seat (decent shape, 1 tear) $25 Tail section with brake lights (black/purple) $25 Both mufflers, black $20 ea or $30 for both Passenger pegs/exhaust hangers (really good shape) $15 ea or $25 for both Complete wiring harness with fuse box $20 Rectifier (I think it works, refund if not) $25 Thermostat housing $10 Cooling fan $10 Ignition coils $20 for both Throttle tube/cable $10 Front brake caliper $15 Front brake light sensor $5 Right side rear set $10 Rear shock $15 Headlight (really, really nice) $30 Turn signals $10 for the good one, $8 for one that has a chip in the plastic Speedo sender $15 w/ cable, $10 w/o cable Right side handle bar $20 Stator $30 16'' wheels/rotors (purple, if anyone wants them?) $15 ea Rear dampener/cush drive $7 Probably have some other stuff... just ask. Will do bundle pricing and combine to save shipping costs. Would be willing to trade for a spare pregen cylinder head or 17'' new gen wheels. Also worth mentioning if anyone wants their pregen forks re-sprung, I'll do that. I have the fork seal driver. Just did mine today. PM for details. Email: bgoggin88@gmail.com Last futzed with by bagtf3; March 30th, 2013 at 05:06 PM. Reason: forgot stuff.

April 13th, 2013, 10:13 AM	#3
!!(0_o)!! ninjette.org member Name: Adam Location: New Orleans Join Date: Mar 2013 Motorcycle(s): 03 ex250 Posts: 41	Do you have the rear brake caliper? EDIT: do you still have the wheels as well? Last futzed with by !!(0_o)!!; April 18th, 2013 at 08:31 PM.

April 19th, 2013, 04:33 PM	#6
krolinked Nerd Name: Chris Location: Tujunga Join Date: Mar 2012 Motorcycle(s): Ducati Hyperstrada Posts: 672	Pics of the rearset? Can you fit it into a 5$ small flat rate box? __________________________________________________ It doesn't LOOK that steep. But you can go first...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pre-Gen Partout	hawker1693	Motorcycle-related	2	December 23rd, 2013 03:59 PM
Complete Partout (2012 250)	Yakaru	Motorcycle-related	89	August 18th, 2013 05:19 PM
found a cheap pregen in WI	jeffreys24	General Motorcycling Discussion	7	October 24th, 2012 02:16 PM
WTB repairable pregen EX250F lower fairing in ATL area (or DIRT cheap shipped)	CZroe	Items Wanted	0	October 13th, 2012 03:55 PM
Random pregen/classic ninja 250 parts for dirt cheap/ free.	Monkeytofu	Motorcycle-related	0	August 18th, 2012 10:52 PM

April 13th, 2013, 10:01 AM	#2
bagtf3 ninjette.org member Name: Bryan Location: St. Louis Join Date: Feb 2013 Motorcycle(s): '06 GSXR 1K, '03 YZ450F, 95 EX250 Posts: 40	Ignore all those prices and make an offer. I need this stuff goooooonnne.

April 13th, 2013, 02:35 PM	#4
choneofakind ninjette.org certified postwhore Name: . Location: . Join Date: Feb 2011 Motorcycle(s): . Posts: Too much. MOTM - Feb '13, Feb '14	@lolibater, you wanted to do a bixenon retrofit right? Here's your chance dude. See how low bagtf3 will go on the headlight. I can help you source the rest of the parts for your retrofit and walk you through it on here.

April 18th, 2013, 07:25 PM	#5
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	Is the stator included with a left side engine case/cover?

April 22nd, 2013, 08:59 AM	#7
illninja ninjette.org newbie Name: Jose Location: Sumet, South Carolina Join Date: Mar 2013 Motorcycle(s): 2007 Kawasaki Ninja 250 Posts: 8	Left exhaust

April 22nd, 2013, 09:43 AM	#8
daisha ninjette.org member Name: Daisha Location: Redlands, CA Join Date: Apr 2013 Motorcycle(s): 06 Ninja 250, 14 FZ-09 Posts: 80	I need a turn signal. Also, has someone claimed the wheels?

April 23rd, 2013, 06:06 PM	#9
CZroe CPT Falcon Name: J.Emmett Turner Location: Newnan, GA Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.	OP: Did you get 17" newgen wheels installed or something?

April 24th, 2013, 07:45 PM	#10
bagtf3 ninjette.org member Name: Bryan Location: St. Louis Join Date: Feb 2013 Motorcycle(s): '06 GSXR 1K, '03 YZ450F, 95 EX250 Posts: 40	PMs replied... All is sold but a spare cylinder head and forks/triple/rebuild kit and .80 rate sonic springs. I did fit 17'' wheels but they weren't off a new gen... it was pretty trick if you ask me. I think I took a picture before I sold it as a roller to a track guy.

May 3rd, 2013, 07:06 PM	#11
05Ninjette89 ninjette.org member Name: Shawn Location: Ocala, Fl Join Date: Mar 2013 Motorcycle(s): 05 Kawasaki Ninja 250R Posts: 37	Selling your stock brake/clutch levers?