Complete Partout (2012 250) - Page 2

justdrew · March 16th, 2013, 05:16 AM

Quote:

Originally Posted by bfpower

Please PM with cost for rearsets. I really only need the left side but if you don't want to separate them let me know.

Please feel free to separate as I only need the right side!

PM price and details please.

Yakaru · April 1st, 2013, 07:57 AM

Thought I would give everyone an update. Got my 250 from the insurance yard

Annoyed: they zip tied all the parts together instead of reassembling her properly. I know for a fact there is damage NOT from the accident (mostly to the fairings). Their zip tie method also wasn't thorough -- lost my seat on the way back (grrr).
Got everything reconnected and the engine runs fine. Forks are definitely hosed. I can't tell if the wheel is ok or not (pinged the dealer who did the crash estimate to see what their eval said).
I'm strongly tempted to track the bike if indeed a frame fix isn't too expensive.
I will keep everyone informed on this thread; please post replies instead of PMs -- easier for me to manage and let's everyone know what has been "claimed" if the part out does proceed. Thanks for being patient

alex.s · April 1st, 2013, 08:38 AM

and so the fun begins, you're gonna have to get that thing back in shape so you can make it out to the track!

THE BIG SITT · April 1st, 2013, 04:51 PM

Is the screen claimed? If not, price?

CynicalC · April 1st, 2013, 05:24 PM

I need the two screws out of the right side handlebar controls.

I lost mine

CynicalC · April 3rd, 2013, 05:54 PM

AY GURL

Yakaru · April 3rd, 2013, 05:58 PM

Hey Cynical, they're all yours if I continue the part out; but everything is on hold ATM

choneofakind · April 3rd, 2013, 07:07 PM

Any decision on how cheap I'm buying that headlight for? Like CHEAP right??

I just want the mounting/aiming pieces from inside it.

Yakaru · April 3rd, 2013, 07:13 PM

Quote:

Originally Posted by choneofakind

Any decision on how cheap I'm buying that headlight for? Like CHEAP right??

I just want the mounting/aiming pieces from inside it.

Bad news for you chone

Headlight is completely done in -- mounting pieces were cracked/snapped in particular.

choneofakind · April 3rd, 2013, 07:15 PM

Even the brackets inside it??? The ones that allow you to aim the reflector? damn. You must have killed that thing.

Yakaru · April 3rd, 2013, 07:18 PM

I hadn't quite thrown it in the trash yet, but the headlight is literally the point of impact from the crash so it took a beating. When I get a chance I'll take a look at the reflector pieces

choneofakind · April 3rd, 2013, 07:20 PM

You rock Yakaru, thanks!

I'm looking for the brackets like this. This picture is from CThunder_Blue's DIY on his retrofit:

sixer · April 7th, 2013, 12:15 AM

ack just reaf thru i guess the front fairing stay is toast then?

mlj2093 · April 9th, 2013, 08:41 AM

Also interested in the Controls and the Black plastic pieces around the gauges and taillight.

HotRedTurbo · April 11th, 2013, 03:19 AM

Is this bike going to be parted out? I'm looking for the plastic piece under tail that ECU mounts onto. Thanks

Yakaru · April 11th, 2013, 06:39 AM

Quote:

Originally Posted by HotRedTurbo

Is this bike going to be parted out? I'm looking for the plastic piece under tail that ECU mounts onto. Thanks

Still on hold but I'll let everyone know

k_tran626 · April 16th, 2013, 08:43 AM

Can I claim the handlebars?

And maybe the mirrors if theyre okay..

Yakaru · April 16th, 2013, 03:11 PM

Just reposting this since I'm still getting PMs:
PLEASE NOTE: this sale is on HOLD

If you want to claim something if I can't fix the bike please post here in the thread; I'll be honoring 'dibs' by first-to-post on the thread if the part out proceeds (it is just the simplest this way). If you need a part soon you'd probably be best served looking somewhere else

alex.s · April 16th, 2013, 03:26 PM

Quote:

Originally Posted by Yakaru

Just reposting this since I'm still getting PMs:
PLEASE NOTE: this sale is on HOLD

If you want to claim something if I can't fix the bike please post here in the thread; I'll be honoring 'dibs' by first-to-post on the thread if the part out proceeds (it is just the simplest this way). If you need a part soon you'd probably be best served looking somewhere else

Hi Yakaru, i just saw your part out thread and was wondering if i could order part <insert random part here>? i need it by friday. sorry i didn't bother reading any of the replies. i figured it was easier just to ask instead of reading upwards of a page of text.

allanoue · April 16th, 2013, 03:30 PM

Quote:

Originally Posted by alex.s

Hi Yakaru,
Track Hotaru

FTFY

Yakaru · April 16th, 2013, 03:32 PM

bwhahaha, thanks for the laugh guys

legion · April 26th, 2013, 01:35 PM

Do you have the rear sets and the passanger peg assem.?

NewbieNinja · April 26th, 2013, 03:09 PM

Next in line for carbs and jets..

Trailerboy531 · April 30th, 2013, 05:50 PM

dibsssssssssss (maybe) on front master cylinder and reservoir. How's the front fairing stay? If that's okay then dibs on it too

Did yer gas tank get damaged? No???? DIBS!

choneofakind · April 30th, 2013, 05:52 PM

max, just buy the whole bike. Then you'll be able to keep wrecking and you'll still have replacement parts.

Trailerboy531 · April 30th, 2013, 07:19 PM

But I'm thinking most of the things on this bike that are wrecked are also wrecked on mine sooooooooooooooooo.......

ninja_thresh_hold · May 6th, 2013, 07:28 AM

Quote:

Originally Posted by Yaozer

Do you have the OEM exhaust shield?

i have one

motoKRAKEN · May 7th, 2013, 08:44 PM

Any chance you still have the stock rear sets?

LNasty · May 23rd, 2013, 12:57 PM

How much for the seat?

trex · June 4th, 2013, 11:58 AM

not sure if this is still going but

would like info on area p system (which one is it?) and price

also interested in left hand (while seated) mirror if available

infinitewhiskey · June 5th, 2013, 09:22 PM

Dibs on the OEM rearsets if you decide to sell.

Yakaru · June 5th, 2013, 09:32 PM

Quick update: Having the frame looked at, should know what's going on soon

miss_syn · June 6th, 2013, 09:01 AM

What shape are the plastics in? I'm looking for a passion red front fender if you have it?

Yakaru · June 10th, 2013, 12:48 PM

Okay, update time. Bike status: total loss. Frame is too destroyed to attempt a repair.

After much discussion Paul offered to buy the bike whole off me for spare parts. Breaking her down will be our big project for this week.

The good news for readers: chances are there are several pieces he already has spares of/doesn't need and so will be showing up in the marketplace; I'll definitely encourage him to see if anyone here wanted anything.

Yakaru · June 10th, 2013, 12:49 PM

Quote:

Originally Posted by miss_syn

What shape are the plastics in? I'm looking for a passion red front fender if you have it?

Sorry, fairings are metallic spark black and are totally wrecked.

rawbert625 · June 10th, 2013, 01:31 PM

how are the forks?

Yakaru · June 10th, 2013, 04:53 PM

Quote:

Originally Posted by rawbert625

how are the forks?

completely FUBAR. Head on collisions do that.

tfkrocks · June 10th, 2013, 06:13 PM

If he doesn't need the stock dogbones, I'm looking for a set!

Yakaru · June 10th, 2013, 08:08 PM

I'll let him know TFK, I owe you one anyway so hopefully he'll part with them

Flipside: the breakdown was shockingly easy with both of us cooperating. See my twitter post here:
http://t.co/UGgfBrP5Ea

Time to take the frame to a scrap metal shop. I did take the VIN plate as a memento of my first bike though

tfkrocks · June 10th, 2013, 09:13 PM

Quote:

Originally Posted by Yakaru

I'll let him know TFK, I owe you one anyway so hopefully he'll part with them

Flipside: the breakdown was shockingly easy with both of us cooperating. See my twitter post here:
http://t.co/UGgfBrP5Ea

Time to take the frame to a scrap metal shop. I did take the VIN plate as a memento of my first bike though

Much appreciated!

Looked at some of your pics on twitter. I see you got the purple you wanted on your Corbin

April 1st, 2013, 08:38 AM	#43
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	and so the fun begins, you're gonna have to get that thing back in shape so you can make it out to the track! __________________________________________________

April 1st, 2013, 05:24 PM	#45
CynicalC ninjette.org certified postwhore Name: Colin Location: Bay Area Join Date: Feb 2011 Motorcycle(s): '96 EX250 Posts: A lot.	I need the two screws out of the right side handlebar controls. I lost mine __________________________________________________ Ç¥ñï©ª\| ßÿ Ñâ7µ®é. Äñt¡~§º¢Ïä\| ßý Çhøî©è.

April 3rd, 2013, 05:54 PM	#46
CynicalC ninjette.org certified postwhore Name: Colin Location: Bay Area Join Date: Feb 2011 Motorcycle(s): '96 EX250 Posts: A lot.	AY GURL __________________________________________________ Ç¥ñï©ª\| ßÿ Ñâ7µ®é. Äñt¡~§º¢Ïä\| ßý Çhøî©è.

April 16th, 2013, 08:43 AM	#57
k_tran626 ninjette.org member Name: Kevin Location: Orange Join Date: Jan 2010 Motorcycle(s): Ninja 250R Posts: 40	Can I claim the handlebars? And maybe the mirrors if theyre okay.. __________________________________________________ 250 FTW

April 30th, 2013, 05:50 PM	#64
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	dibsssssssssss (maybe) on front master cylinder and reservoir. How's the front fairing stay? If that's okay then dibs on it too Did yer gas tank get damaged? No???? DIBS! __________________________________________________ CVMA #531

April 1st, 2013, 07:57 AM	#42
Yakaru The Violet Vixen Name: Yakaru Location: Issaquah, WA & Las Vegas, NV Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot. MOTM - Jun '16	Thought I would give everyone an update. Got my 250 from the insurance yard Annoyed: they zip tied all the parts together instead of reassembling her properly. I know for a fact there is damage NOT from the accident (mostly to the fairings). Their zip tie method also wasn't thorough -- lost my seat on the way back (grrr). Got everything reconnected and the engine runs fine. Forks are definitely hosed. I can't tell if the wheel is ok or not (pinged the dealer who did the crash estimate to see what their eval said). I'm strongly tempted to track the bike if indeed a frame fix isn't too expensive. I will keep everyone informed on this thread; please post replies instead of PMs -- easier for me to manage and let's everyone know what has been "claimed" if the part out does proceed. Thanks for being patient

April 1st, 2013, 04:51 PM	#44
THE BIG SITT ninjette.org sage Name: Andy Location: Indianapolis Join Date: Aug 2011 Motorcycle(s): 2008 Kawasaki Ninja 250R Posts: 771	Is the screen claimed? If not, price?

April 3rd, 2013, 05:58 PM	#47
Yakaru The Violet Vixen Name: Yakaru Location: Issaquah, WA & Las Vegas, NV Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot. MOTM - Jun '16	Hey Cynical, they're all yours if I continue the part out; but everything is on hold ATM

April 3rd, 2013, 07:07 PM	#48
choneofakind ninjette.org certified postwhore Name: . Location: . Join Date: Feb 2011 Motorcycle(s): . Posts: Too much. MOTM - Feb '13, Feb '14	Any decision on how cheap I'm buying that headlight for? Like CHEAP right?? I just want the mounting/aiming pieces from inside it.

April 3rd, 2013, 07:15 PM	#50
choneofakind ninjette.org certified postwhore Name: . Location: . Join Date: Feb 2011 Motorcycle(s): . Posts: Too much. MOTM - Feb '13, Feb '14	Even the brackets inside it??? The ones that allow you to aim the reflector? damn. You must have killed that thing.

April 3rd, 2013, 07:18 PM	#51
Yakaru The Violet Vixen Name: Yakaru Location: Issaquah, WA & Las Vegas, NV Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot. MOTM - Jun '16	I hadn't quite thrown it in the trash yet, but the headlight is literally the point of impact from the crash so it took a beating. When I get a chance I'll take a look at the reflector pieces

April 3rd, 2013, 07:20 PM	#52
choneofakind ninjette.org certified postwhore Name: . Location: . Join Date: Feb 2011 Motorcycle(s): . Posts: Too much. MOTM - Feb '13, Feb '14	You rock Yakaru, thanks! I'm looking for the brackets like this. This picture is from CThunder_Blue's DIY on his retrofit:

April 7th, 2013, 12:15 AM	#53
sixer no joy Name: Six Location: Cali Join Date: Nov 2009 Motorcycle(s): Ninja 2006 636 Posts: 408	ack just reaf thru i guess the front fairing stay is toast then?

April 9th, 2013, 08:41 AM	#54
mlj2093 ninjette.org member Name: Matt Location: Norfolk, VA Join Date: Mar 2011 Motorcycle(s): 2011 Kawi 250 SE Posts: 105	Also interested in the Controls and the Black plastic pieces around the gauges and taillight.

April 11th, 2013, 03:19 AM	#55
HotRedTurbo ninjette.org member Name: Jesus Location: Orlando, FL Join Date: Aug 2012 Motorcycle(s): 2008 Ninja 250r, 2003 GSX R600 Posts: 64	Is this bike going to be parted out? I'm looking for the plastic piece under tail that ECU mounts onto. Thanks

April 16th, 2013, 03:11 PM	#58
Yakaru The Violet Vixen Name: Yakaru Location: Issaquah, WA & Las Vegas, NV Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot. MOTM - Jun '16	Just reposting this since I'm still getting PMs: PLEASE NOTE: this sale is on HOLD If you want to claim something if I can't fix the bike please post here in the thread; I'll be honoring 'dibs' by first-to-post on the thread if the part out proceeds (it is just the simplest this way). If you need a part soon you'd probably be best served looking somewhere else

April 16th, 2013, 03:32 PM	#61
Yakaru The Violet Vixen Name: Yakaru Location: Issaquah, WA & Las Vegas, NV Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot. MOTM - Jun '16	bwhahaha, thanks for the laugh guys

April 26th, 2013, 01:35 PM	#62
legion ninjette.org newbie Name: mucio Location: santa rosa Join Date: Apr 2012 Motorcycle(s): ninja 250 Posts: 4	Do you have the rear sets and the passanger peg assem.?

April 26th, 2013, 03:09 PM	#63
NewbieNinja ninjette.org member Name: Yue Pheng Location: San Diego, CA Join Date: Oct 2012 Motorcycle(s): 2008 Kawasaki Ninja 250r, 2009 Suzuki GSX-R750 Posts: 85	Next in line for carbs and jets..

April 30th, 2013, 05:52 PM	#65
choneofakind ninjette.org certified postwhore Name: . Location: . Join Date: Feb 2011 Motorcycle(s): . Posts: Too much. MOTM - Feb '13, Feb '14	max, just buy the whole bike. Then you'll be able to keep wrecking and you'll still have replacement parts.

April 30th, 2013, 07:19 PM	#66
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	But I'm thinking most of the things on this bike that are wrecked are also wrecked on mine sooooooooooooooooo....... __________________________________________________ CVMA #531

May 7th, 2013, 08:44 PM	#68
motoKRAKEN ninjette.org member Name: Sarah Location: Cabot Join Date: Apr 2013 Motorcycle(s): 2007 Ninja 250R Posts: 35	Any chance you still have the stock rear sets? __________________________________________________ DiRTY30 \| -X--X-( )-X--X-

May 23rd, 2013, 12:57 PM	#69
LNasty Daily Jap rider Name: Lance Location: La Porte Join Date: Dec 2012 Motorcycle(s): 2012 Ninja 250r Posts: A lot.	How much for the seat?

June 4th, 2013, 11:58 AM	#70
trex ninjette.org member Name: Matt Location: St. Louis Join Date: Mar 2011 Motorcycle(s): 250r '08 Candy Plasma (best) Blue Posts: 80	not sure if this is still going but would like info on area p system (which one is it?) and price also interested in left hand (while seated) mirror if available

June 5th, 2013, 09:22 PM	#71
infinitewhiskey meh Name: Joe Location: SoCal Join Date: Apr 2013 Motorcycle(s): 2002 EX250F Cafe/Streetfighter Project Posts: 60	Dibs on the OEM rearsets if you decide to sell. __________________________________________________ SoCal 626/951 instagram \| youtube \| modifications

June 5th, 2013, 09:32 PM	#72
Yakaru The Violet Vixen Name: Yakaru Location: Issaquah, WA & Las Vegas, NV Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot. MOTM - Jun '16	Quick update: Having the frame looked at, should know what's going on soon

June 6th, 2013, 09:01 AM	#73
miss_syn my hair matches my bike Name: Tiffany Location: Greater Pittsburgh Metropolitan Area Join Date: Apr 2011 Motorcycle(s): 2010 Red 250r Posts: 411	What shape are the plastics in? I'm looking for a passion red front fender if you have it?

June 10th, 2013, 12:48 PM	#74
Yakaru The Violet Vixen Name: Yakaru Location: Issaquah, WA & Las Vegas, NV Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot. MOTM - Jun '16	Okay, update time. Bike status: total loss. Frame is too destroyed to attempt a repair. After much discussion Paul offered to buy the bike whole off me for spare parts. Breaking her down will be our big project for this week. The good news for readers: chances are there are several pieces he already has spares of/doesn't need and so will be showing up in the marketplace; I'll definitely encourage him to see if anyone here wanted anything.

June 10th, 2013, 01:31 PM	#76
rawbert625 ninjette.org member Name: Robert Location: moto town Join Date: Jun 2012 Motorcycle(s): the cool ones Posts: 182	how are the forks?

June 10th, 2013, 06:13 PM	#78
tfkrocks ninjette.org certified postwhore Name: Rebecca Location: SF Bay Area Join Date: Sep 2009 Motorcycle(s): 2013 Ninja 300 w/ ABS, 2014 NC700X, 2008 Ninja 250 (sold), 2002 Ninja 250 (sold) Posts: A lot. MOTM - Jan '18, Sep '13	If he doesn't need the stock dogbones, I'm looking for a set!

June 10th, 2013, 08:08 PM	#79
Yakaru The Violet Vixen Name: Yakaru Location: Issaquah, WA & Las Vegas, NV Join Date: Jun 2012 Motorcycle(s): Perigee (250), Hotaru (250), Saturn (300), Pearl (300), Zero (S1000RR), Chibi (Z125), Xellos ('18 HP4R) Posts: A lot. MOTM - Jun '16	I'll let him know TFK, I owe you one anyway so hopefully he'll part with them Flipside: the breakdown was shockingly easy with both of us cooperating. See my twitter post here: http://t.co/UGgfBrP5Ea Time to take the frame to a scrap metal shop. I did take the VIN plate as a memento of my first bike though