March 30th, 2013, 05:00 PM | #1 |
ninjette.org member
Name: Bryan
Location: St. Louis
Join Date: Feb 2013 Motorcycle(s): '06 GSXR 1K, '03 YZ450F, 95 EX250 Posts: 40
|
Pregen semi Partout (cheap)
I am in the midst of a pre gen track build and everything thing that I don't need, which is basically everything, is up for grabs. I have already sold some stuff on ebay, but here is a quick run down of the rest.
Note: All prices are + shipping from 63303 (St. Louis Area) and I have photos available if you'd like. BTW the bike was a '95. Gauge cluster/bezel (8900 miles, clean) $30 Seat (decent shape, 1 tear) $25 Tail section with brake lights (black/purple) $25 Both mufflers, black $20 ea or $30 for both Passenger pegs/exhaust hangers (really good shape) $15 ea or $25 for both Complete wiring harness with fuse box $20 Rectifier (I think it works, refund if not) $25 Thermostat housing $10 Cooling fan $10 Ignition coils $20 for both Throttle tube/cable $10 Front brake caliper $15 Front brake light sensor $5 Right side rear set $10 Rear shock $15 Headlight (really, really nice) $30 Turn signals $10 for the good one, $8 for one that has a chip in the plastic Speedo sender $15 w/ cable, $10 w/o cable Right side handle bar $20 Stator $30 16'' wheels/rotors (purple, if anyone wants them?) $15 ea Rear dampener/cush drive $7 Probably have some other stuff... just ask. Will do bundle pricing and combine to save shipping costs. Would be willing to trade for a spare pregen cylinder head or 17'' new gen wheels. Also worth mentioning if anyone wants their pregen forks re-sprung, I'll do that. I have the fork seal driver. Just did mine today. PM for details. Email: bgoggin88@gmail.com Last futzed with by bagtf3; March 30th, 2013 at 05:06 PM. Reason: forgot stuff. |
|
April 13th, 2013, 10:01 AM | #2 |
ninjette.org member
Name: Bryan
Location: St. Louis
Join Date: Feb 2013 Motorcycle(s): '06 GSXR 1K, '03 YZ450F, 95 EX250 Posts: 40
|
Ignore all those prices and make an offer. I need this stuff goooooonnne.
|
|
April 13th, 2013, 10:13 AM | #3 |
ninjette.org member
Name: Adam
Location: New Orleans
Join Date: Mar 2013 Motorcycle(s): 03 ex250 Posts: 41
|
Do you have the rear brake caliper?
EDIT: do you still have the wheels as well? Last futzed with by !!(0_o)!!; April 18th, 2013 at 08:31 PM. |
|
April 13th, 2013, 02:35 PM | #4 |
ninjette.org certified postwhore
Name: .
Location: .
Join Date: Feb 2011 Motorcycle(s): . Posts: Too much.
MOTM - Feb '13, Feb '14
|
@lolibater, you wanted to do a bixenon retrofit right? Here's your chance dude. See how low bagtf3 will go on the headlight. I can help you source the rest of the parts for your retrofit and walk you through it on here.
|
|
April 18th, 2013, 07:25 PM | #5 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
Is the stator included with a left side engine case/cover?
|
|
April 19th, 2013, 04:33 PM | #6 |
Nerd
Name: Chris
Location: Tujunga
Join Date: Mar 2012 Motorcycle(s): Ducati Hyperstrada Posts: 672
|
Pics of the rearset? Can you fit it into a 5$ small flat rate box?
__________________________________________________
It doesn't LOOK that steep. But you can go first... |
|
April 22nd, 2013, 08:59 AM | #7 |
ninjette.org newbie
Name: Jose
Location: Sumet, South Carolina
Join Date: Mar 2013 Motorcycle(s): 2007 Kawasaki Ninja 250 Posts: 8
|
Left exhaust
|
|
April 22nd, 2013, 09:43 AM | #8 |
ninjette.org member
Name: Daisha
Location: Redlands, CA
Join Date: Apr 2013 Motorcycle(s): 06 Ninja 250, 14 FZ-09 Posts: 80
|
I need a turn signal. Also, has someone claimed the wheels?
|
|
April 23rd, 2013, 06:06 PM | #9 |
CPT Falcon
Name: J.Emmett Turner
Location: Newnan, GA
Join Date: Apr 2009 Motorcycle(s): '08 CP Blue EX250J, '97 unpainted EX250F, 2nd '97 unpainted EX250F (no engine), '07 black EX250F Posts: A lot.
|
OP: Did you get 17" newgen wheels installed or something?
|
|
April 24th, 2013, 07:45 PM | #10 |
ninjette.org member
Name: Bryan
Location: St. Louis
Join Date: Feb 2013 Motorcycle(s): '06 GSXR 1K, '03 YZ450F, 95 EX250 Posts: 40
|
PMs replied... All is sold but a spare cylinder head and forks/triple/rebuild kit and .80 rate sonic springs.
I did fit 17'' wheels but they weren't off a new gen... it was pretty trick if you ask me. I think I took a picture before I sold it as a roller to a track guy. |
|
May 3rd, 2013, 07:06 PM | #11 |
ninjette.org member
Name: Shawn
Location: Ocala, Fl
Join Date: Mar 2013 Motorcycle(s): 05 Kawasaki Ninja 250R Posts: 37
|
Selling your stock brake/clutch levers?
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Pre-Gen Partout | hawker1693 | Motorcycle-related | 2 | December 23rd, 2013 03:59 PM |
Complete Partout (2012 250) | Yakaru | Motorcycle-related | 89 | August 18th, 2013 05:19 PM |
found a cheap pregen in WI | jeffreys24 | General Motorcycling Discussion | 7 | October 24th, 2012 02:16 PM |
WTB repairable pregen EX250F lower fairing in ATL area (or DIRT cheap shipped) | CZroe | Items Wanted | 0 | October 13th, 2012 03:55 PM |
Random pregen/classic ninja 250 parts for dirt cheap/ free. | Monkeytofu | Motorcycle-related | 0 | August 18th, 2012 10:52 PM |
|
|