July 19th, 2010, 08:55 PM | #1 |
ninjette.org newbie
Name: Jamie
Location: Canada
Join Date: Apr 2010 Motorcycle(s): 2010 Ninja 250 Red Posts: 9
|
fuel for temp guage swap
I am wondering what if possible would be needed to swap the 2010 fuel guage for an 08 temp guage?
|
|
July 19th, 2010, 09:04 PM | #2 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
you want a temp gauge for your fuel?
__________________________________________________
Sportisimoto USA is born. |
|
July 19th, 2010, 09:07 PM | #3 |
ninjette.org newbie
Name: Jamie
Location: Canada
Join Date: Apr 2010 Motorcycle(s): 2010 Ninja 250 Red Posts: 9
|
no instead of having a fuel guage that doesnt seem to really work , i would rather have a water temp guage like the 2008 250s had before they swiched to fuel guages
|
|
July 19th, 2010, 09:22 PM | #4 |
The Sportisi Master
Name: Matt
Location: Chico
Join Date: May 2009 Motorcycle(s): 2008 Ninja 250 Posts: A lot.
|
Rather than destroy the cluster I did this.
__________________________________________________
Sportisimoto USA is born. |
|
July 19th, 2010, 09:38 PM | #5 |
ninjette.org newbie
Name: Jamie
Location: Canada
Join Date: Apr 2010 Motorcycle(s): 2010 Ninja 250 Red Posts: 9
|
is something like this not possible?
|
|
July 19th, 2010, 10:49 PM | #6 |
ninjette.org member
Name: Chris
Location: LA
Join Date: Dec 2009 Motorcycle(s): 250r Posts: 199
|
my 08 250 doesn't have a temp guage?
|
|
July 19th, 2010, 11:05 PM | #7 |
Join Date: Nov 2008 Posts: Too much.
|
|
|
July 19th, 2010, 11:11 PM | #8 |
ninjette.org guru
Name: Simen
Location: Norway
Join Date: Jan 2009 Motorcycle(s): 2008 250R (Black) Posts: 298
|
It's the Fuel Injected 250R's that got the temp gauge. Doesn't have anything to do with 2008 bikes, as far as i know.
|
|
July 20th, 2010, 03:26 AM | #9 |
ninjette.org member
Name: b
Location: midwest
Join Date: Jun 2010 Motorcycle(s): 2008 ninja 250r Posts: 119
|
|
|
July 20th, 2010, 05:19 AM | #10 |
IC2(SW)
Name: Kerry
Location: Pensacola
Join Date: Nov 2008 Motorcycle(s): . Posts: A lot.
|
Find the gauge, or the complete cluster. Also the temp sender.. Get the sender from the tank, you can have the low fuel light too.
I havent seen anything come across ebay since 2008, been looking. Tried emailing shops overseas, but they were no help. GL on finding the stuff |
|
July 21st, 2010, 01:29 PM | #11 |
ninjette.org certified postwhore
Name: Bob
Location: CA
Join Date: Dec 2008 Motorcycle(s): '08 Ninja 250r, '14 CBR500r Posts: A lot.
|
Here is a DIY I did for the Daytona water gauge.
The only downside I have found, is the LCD display will black-out in direct sunlight on 100 degree days. |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Koso RX-1N guage install help | UnshavenCanuck | 1986 - 2007 Ninja 250R Farkles | 5 | May 12th, 2014 10:12 AM |
Koso Oil Temp Sensor Adapter & Water Temp Sensor Adapter | StaylorT | 2008 - 2012 Ninja 250R Tech Talk | 10 | January 24th, 2014 12:38 AM |
oil temp vs coolant temp | cuong-nutz | General Motorcycling Discussion | 11 | January 23rd, 2013 05:44 PM |
clock temperature hygrometer voltage guage | cuong-nutz | 2008 - 2012 Ninja 250R Farkles | 8 | June 24th, 2012 01:18 PM |
Slow inaccurate gas guage | DirtyBoy | 2008 - 2012 Ninja 250R Tech Talk | 29 | April 24th, 2009 07:53 PM |
|
|