August 15th, 2011, 05:42 AM | #1 |
You are sleeping
Name: Casey
Location: LMFAO!!!
Join Date: Nov 2009 Motorcycle(s): 2 Posts: A lot.
|
Pocketbike Nitrous
So with the little nitrous kits on ebay now days you can pretty much stuff nitrous in anything. Wondering if anyone has nos'ed out the ninja yet.
Not that I want to try it for any reason as mine will have a top speed of 40mph soon, but just wondering the results. lol
__________________________________________________
<Yeah, it's a 250. LMFAO! Weaksauce |
|
August 15th, 2011, 05:59 AM | #2 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
I'd be interested in a kit that wouldn't be dangerous to the Lil ninjette's reliability.
Have a link to what your referencing?
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
August 15th, 2011, 06:07 AM | #3 |
You are sleeping
Name: Casey
Location: LMFAO!!!
Join Date: Nov 2009 Motorcycle(s): 2 Posts: A lot.
|
I actually had a pocket bike a while back and bought one of these..
http://cgi.ebay.com/UNIVERSAL-NITROU...#ht_1272wt_902 But the nitrous canisters were rusty so I threw them away. I have the hose and the nitrous canister discharger still but none of the cartridges on hand anymore. I don't see why it wouldn't work on the ninja too?! Lol wonder what would happen. Could inject it right into the K&N filter like on a pocket bike.
__________________________________________________
<Yeah, it's a 250. LMFAO! Weaksauce |
|
August 15th, 2011, 06:23 AM | #4 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
I have been using nitrous on my 250 Ninja since 2010. I have gotten over 121 mph. I will be going back to Maxton in September to spray again.
|
|
August 15th, 2011, 06:28 AM | #5 |
You are sleeping
Name: Casey
Location: LMFAO!!!
Join Date: Nov 2009 Motorcycle(s): 2 Posts: A lot.
|
I knew you would have something to do with this!
Very nice.
__________________________________________________
<Yeah, it's a 250. LMFAO! Weaksauce |
|
August 15th, 2011, 06:35 AM | #6 |
ninjette.org certified postwhore
Name: Eric
Location: Iowa City
Join Date: May 2009 Motorcycle(s): 2008 Kawmeracchi 350 2010 Project X Posts: A lot.
Blog Entries: 54
MOTM - Sep '18, Feb '16
|
I wish I could ride a pocket bike.My knees will not bend like that. I would like to have one.Maybe after someone blows there engine with nitrous .Then I could hang it on the wall.
|
|
August 15th, 2011, 06:39 AM | #7 |
You are sleeping
Name: Casey
Location: LMFAO!!!
Join Date: Nov 2009 Motorcycle(s): 2 Posts: A lot.
|
I had one more for tinkering than riding but it was pretty fun.
I thought I dragged knee first on the ninja but forgot about those times on the pocketbike. lol I used to low side it all the time cause I was learning to get my knee down lololol I had skateboard ramp knee pads. The chinese pocketbikes were $400 back then when they first came out replicating the Polini's. Now they seem to be $200 on ebay. Learned how to make real shaped fairings from Fiberglass and Bondo using cardboard and masking tape molds on that thing. Good little learning bikes. Also learned what a two stroke is and how to mix gas.
__________________________________________________
<Yeah, it's a 250. LMFAO! Weaksauce |
|
August 15th, 2011, 06:52 AM | #8 |
ninjette.org certified postwhore
Name: Jason
Location: Jacksonville, Florida
Join Date: May 2010 Motorcycle(s): 09 Ninja 250R SE, 07 Honda CRF230F, 06 Honda CRF150F Posts: A lot.
|
Isn't there tons of testing and AF ratio's to deal with to find a reliable system though?
__________________________________________________
09 250R SE: Paying it forward one post at a time! Don't forget to add yourself to our Member Map |
|
August 15th, 2011, 06:56 AM | #9 |
You are sleeping
Name: Casey
Location: LMFAO!!!
Join Date: Nov 2009 Motorcycle(s): 2 Posts: A lot.
|
I think he is always inside of his engine.
I'm not sure how reliable it would be, but I don't think a quick shot of pocketbike nos would hurt you. Then again, don't take my word for it because I have been known to try and pull some dumb stuff. I don't know what it will do, but you can basically Nos a lawnmower now days if you want. Youtube the kids and see what they do with these ntirous kits while mom is out at work.
__________________________________________________
<Yeah, it's a 250. LMFAO! Weaksauce |
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
250 Ninja Nitrous | Racer x | 2008 - 2012 Ninja 250R Tech Talk | 202 | February 22nd, 2019 04:18 PM |
Pocketbike Adventure | akima | Videos | 5 | March 3rd, 2012 09:03 PM |
250 with Turbo/Nitrous | Alex | General Motorcycling Discussion | 18 | April 20th, 2010 06:40 PM |
[sportrider - latest stories] - Nitrous Oxide--"Wet" and "Dry" Kits | Ninjette Newsbot | Motorcycling News | 0 | April 9th, 2010 11:30 AM |
[faster and faster] - The 200bhp nitrous-oxide-powered Suzuki B-King | Ninjette Newsbot | Motorcycling News | 0 | November 11th, 2008 11:39 PM |
|
|