Lots and lots of parts

Super Dave · May 7th, 2014, 02:09 PM

Hey folks,
I have a ton of parts available. Give me shout and I'll see if I have it for you. Make me an offer on what you are looking for. I will use USPS Flat Rate boxes for anything that will fit and for the larger stuff....well we'll have to see what it costs. I attached a photo of on of my piles

Dave

Trailerboy531 · May 7th, 2014, 02:43 PM

jesus tap dancing christ...

alex.s · May 7th, 2014, 02:51 PM

do you have a good condition 300 crank and rods and cylinders?

or a good condition 250 crank and rods?

Super Dave · May 7th, 2014, 03:04 PM

I should definitely let me pick out a couple good ones and I'll get you some pics.

csmith12 · May 7th, 2014, 03:16 PM

Any BRT's?

Super Dave · May 7th, 2014, 03:33 PM

Quote:

Originally Posted by csmith12

Any BRT's?

I have a start/stop switch and a remote programer

abhijitz · May 8th, 2014, 07:57 AM

Dave - Do you have a working OEM ECU ? Need one for Eric's bike. If so, i can pick up from you 12th or 13th at THill

WAGESLAVEesc · May 15th, 2014, 10:54 AM

Got a ninja 250 pregen handlebar tube? Part # 46003

http://www.powersportskawasaki.com/i...8802-f2310.gif

Super Dave · May 15th, 2014, 12:58 PM

Sorry, only have 2nd gen parts.

Quote:

Originally Posted by WAGESLAVEesc

Got a ninja 250 pregen handlebar tube? Part # 46003

http://www.powersportskawasaki.com/i...8802-f2310.gif

CZroe · May 15th, 2014, 07:45 PM

Quote:

Originally Posted by Super Dave

Sorry, only have 2nd gen parts.

The J-bike is not "2nd gen," you know?

Anyway, got any good clutch packs for the 2008-2012? How much? What kind of mileage/use?

macantley · May 16th, 2014, 06:09 PM

looking for a gas cap, with key, or if you can open/close them securely without a key thats fine too, its for my project ATV using a ninja 250 tank, i also need both stock mufflers.

matthew

for a 95 model ex250

Trailerboy531 · May 16th, 2014, 06:15 PM

He already said that he has 2nd gen only.

Insane Pie · May 17th, 2014, 11:21 AM

Any rear sets?

Worldtraveller · May 18th, 2014, 12:47 AM

Looking for a set of (racing) rearsets. (Not stock.)

JohnnyBravo · May 18th, 2014, 10:53 AM

I'm jelly...

nice pile

subxero · May 19th, 2014, 05:32 AM

intake cam for a new gen in good condition? PM me if so we can discuss price.

AndrewW · May 19th, 2014, 08:00 AM

Any chance you have the rubber grommet that goes in the back of the trunk...... That a seat cowl slots into? And would you post to Ireland!

ill send you back a shamrock!

Triple R · May 19th, 2014, 11:00 AM

Do you have:

-Aftermarket Rear Shock
-Aftermarket Fork Cartridges
-Steering Damper
-Aftermarket Full Exhaust
-Race Bodywork
-Aftermarket Clipons & Rearsets (If so what brand?)

Interested in a BRT too if you have one for sale.

cuong-nutz · May 19th, 2014, 12:03 PM

Got any .80-.90 fork springs?

Super Dave · May 21st, 2014, 10:02 AM

Yea, Sorry Matthew, 2008-2012 parts only.

Quote:

Originally Posted by macantley

looking for a gas cap, with key, or if you can open/close them securely without a key thats fine too, its for my project ATV using a ninja 250 tank, i also need both stock mufflers.

matthew

for a 95 model ex250

Super Dave · May 21st, 2014, 10:26 AM

Trying to catch up on this thread guys. Here we go:

Insane Pie: Have left side Stock rear sets. Out of the right side.

Worldtraveller: No aftermarket rearsets available at the moment.

subzero: PM sent

AndrewW: Keeping the shipping to US only for now

Triple R: I only have a RPM Rear Shock (needs a rebuild) I also have a BRT remote programer and a BRT Start switch.

Dave

subxero · May 21st, 2014, 11:59 AM

cuong-nutz · May 21st, 2014, 12:27 PM

Quote:

Originally Posted by cuong-nutz

Got any .80-.90 fork springs?

Triple R · May 21st, 2014, 01:08 PM

PM Sent

CZroe · May 21st, 2014, 06:10 PM

Quote:

Originally Posted by Super Dave

Trying to catch up on this thread guys. Here we go:

Insane Pie: Have left side Stock rear sets. Out of the right side.

Worldtraveller: No aftermarket rearsets available at the moment.

subzero: PM sent

AndrewW: Keeping the shipping to US only for now

Triple R: I only have a RPM Rear Shock (needs a rebuild) I also have a BRT remote programer and a BRT Start switch.

Dave

Quote:

Originally Posted by CZroe

...got any good clutch packs for the 2008-2012? How much? What kind of mileage/use?

Don't forget me.

Thanks!

MrSavvy · May 22nd, 2014, 12:52 AM

Hey bud, I need an ignition/gas cap/rear seat lock set (with a matched key lol).
Any chance you have a keyed set?

Thanks

Edit: for an '09.

justdrew · May 22nd, 2014, 06:48 AM

Would you still have a stock muffler in good condition?

Insane Pie · May 22nd, 2014, 09:25 PM

Quote:

Originally Posted by Super Dave

Trying to catch up on this thread guys. Here we go:

Insane Pie: Have left side Stock rear sets. Out of the right side.

Worldtraveller: No aftermarket rearsets available at the moment.

subzero: PM sent

AndrewW: Keeping the shipping to US only for now

Triple R: I only have a RPM Rear Shock (needs a rebuild) I also have a BRT remote programer and a BRT Start switch.

Dave

That's exactly the one I needed, but just picked one up. Do you have any shifters that aren't bent?

MrSavvy · May 26th, 2014, 02:44 PM

OP, you alive? lol

nickjpass · May 26th, 2014, 04:40 PM

any zx6r parts?

Super Dave · May 29th, 2014, 03:39 PM

Hey Folks,
Dealing with a little family emergency. I'll reply to all when I get back home (hopefully next week).
Dave

MrSavvy · May 29th, 2014, 05:35 PM

Quote:

Originally Posted by Super Dave

Hey Folks,
Dealing with a little family emergency. I'll reply to all when I get back home (hopefully next week).
Dave

No worries bud. Take your time, I hope everything turns out okay.

AndrewW · May 29th, 2014, 05:52 PM

No problem dude!

salcuta88 · July 10th, 2014, 06:56 AM

Do you have an aftermarket exhaust?

garth285 · July 11th, 2014, 10:47 AM

PM me a price on a 08+ cylinder head complete minus cams?

ninjakuma · July 14th, 2014, 07:02 PM

Do you have the spark plug boots and wires for a pregen 250?

Daks · July 20th, 2014, 01:45 AM

Have any pregen rear rotors and maybe a front one? Also perhaps clutch plates in decent shape?

ninjakuma · July 20th, 2014, 11:25 AM

Do you have a any pregen mirrors or the metal bracket that holds them?

LNasty · July 20th, 2014, 11:59 AM

My reaction to this ginormous picture that you uploaded. ....
tumblr_m4x4d9t9Dk1rrifv1o6_500.gif

or more like this.....

Link to original page on YouTube.

nadroj · August 6th, 2014, 12:16 PM

Got an straight handlebars for the 2nd get

Everything on ebay is bent. THANKS!

edit: PM me if you do and we can work out a price?

May 7th, 2014, 02:09 PM	#1
Super Dave ninjette.org member Name: David Location: Roseville, CA Join Date: Jun 2013 Motorcycle(s): Ninja 300 Posts: 30	Lots and lots of parts Hey folks, I have a ton of parts available. Give me shout and I'll see if I have it for you. Make me an offer on what you are looking for. I will use USPS Flat Rate boxes for anything that will fit and for the larger stuff....well we'll have to see what it costs. I attached a photo of on of my piles Dave __________________________________________________ David A. Seyl, Owner Feel Like A Pro, LLC

May 7th, 2014, 02:43 PM	#2
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	jesus tap dancing christ... __________________________________________________ CVMA #531

May 7th, 2014, 02:51 PM	#3
alex.s wat Name: wat Location: tustin/long beach Join Date: Sep 2009 Motorcycle(s): wat Posts: Too much. Blog Entries: 5 MOTM - Oct '12, Feb '14	do you have a good condition 300 crank and rods and cylinders? or a good condition 250 crank and rods? __________________________________________________

May 7th, 2014, 03:04 PM	#4
Super Dave ninjette.org member Name: David Location: Roseville, CA Join Date: Jun 2013 Motorcycle(s): Ninja 300 Posts: 30	I should definitely let me pick out a couple good ones and I'll get you some pics. __________________________________________________ David A. Seyl, Owner Feel Like A Pro, LLC

May 7th, 2014, 03:16 PM	#5
csmith12 The Corner Whisperer Name: Chris (aka Reactor) Location: Northern KY Join Date: May 2011 Motorcycle(s): 2010 250 (track), 1992 250, 2006 R6 (street/track), 2008 R6 (track) Posts: Too much. MOTY 2015, MOTM - Nov '12, Nov '13	Any BRT's? __________________________________________________ Goal: Shake A Million Hands \| Look through the corners \| Track Day Prep \| Closest track? \| The Mid-Ohio School

May 8th, 2014, 07:57 AM	#7
abhijitz ninjette.org sage Name: Abhijit Location: San Francisco Join Date: Nov 2011 Motorcycle(s): Many Two Wheels .. Posts: 611	Dave - Do you have a working OEM ECU ? Need one for Eric's bike. If so, i can pick up from you 12th or 13th at THill __________________________________________________ [ex-AFM #828 \| SMUSA #828 \| Sponsors : MotionPro \| LeoVince \| Insurrection Racing Gloves \| QstarZ Laptimers + OEM Parts @ 30-40% OFF : Harry @ 1-877-437-1631,17 harry@hondaeasttoledo.com

May 15th, 2014, 10:54 AM	#8
WAGESLAVEesc ninjette.org member Name: Anti Location: portland Join Date: Jul 2011 Motorcycle(s): 04 250R Posts: 28	Got a ninja 250 pregen handlebar tube? Part # 46003 http://www.powersportskawasaki.com/i...8802-f2310.gif

May 16th, 2014, 06:09 PM	#11
macantley ninjette.org newbie Name: matthew Location: south charleston Join Date: May 2014 Motorcycle(s): franken bike/atv Posts: 8	looking for a gas cap, with key, or if you can open/close them securely without a key thats fine too, its for my project ATV using a ninja 250 tank, i also need both stock mufflers. matthew for a 95 model ex250

May 16th, 2014, 06:15 PM	#12
Trailerboy531 Gear crash test dummy Name: Max Location: South Bay (So. Cal) Join Date: May 2011 Motorcycle(s): 2010 Ninja 250 race bike, 2014 ZX-636r Posts: A lot.	He already said that he has 2nd gen only. __________________________________________________ CVMA #531

May 17th, 2014, 11:21 AM	#13
Insane Pie ninjette.org member Name: Alex Location: Las Vegas Join Date: Apr 2014 Motorcycle(s): '08 Ninja 250 Posts: 132	Any rear sets?

May 18th, 2014, 12:47 AM	#14
Worldtraveller ninjette.org sage Name: Lane Location: Medford, OR Join Date: May 2014 Motorcycle(s): Ninja 250 (trackbike), CBR600RR, GS500F Posts: 588	Looking for a set of (racing) rearsets. (Not stock.)

May 18th, 2014, 10:53 AM	#15
JohnnyBravo Certifiable nontundrum Name: Harper Location: NC Milkshake stand Join Date: Mar 2013 Motorcycle(s): 2013 SE NINJA 300 Posts: Too much. MOTM - Sep '13, Sep '16	I'm jelly... nice pile

May 19th, 2014, 05:32 AM	#16
subxero dirty boy Name: Joe Location: Johnstown, PA Join Date: Sep 2012 Motorcycle(s): I don't even know anymore?? Posts: A lot. MOTM - Apr '14	intake cam for a new gen in good condition? PM me if so we can discuss price. __________________________________________________ I love the smell of burning pre-mix in the morning I don't think I'm a lot dumber than you thought that I think that I thought I was once.

May 19th, 2014, 08:00 AM	#17
AndrewW ninjette.org newbie Name: Andrew Location: Ireland Join Date: Apr 2014 Motorcycle(s): 2010 ninja 250r Posts: 8	Any chance you have the rubber grommet that goes in the back of the trunk...... That a seat cowl slots into? And would you post to Ireland! ill send you back a shamrock!

May 19th, 2014, 11:00 AM	#18
Triple R ninjette.org member Name: D.Doan Location: Shark City Join Date: Jan 2013 Motorcycle(s): Suzuki's Posts: 40	Do you have: -Aftermarket Rear Shock -Aftermarket Fork Cartridges -Steering Damper -Aftermarket Full Exhaust -Race Bodywork -Aftermarket Clipons & Rearsets (If so what brand?) Interested in a BRT too if you have one for sale.

May 19th, 2014, 12:03 PM	#19
cuong-nutz RIP Alex Name: Cuong Location: Houston, TX Join Date: Apr 2011 Motorcycle(s): '10 250r, '09 265r Posts: A lot. Blog Entries: 2	Got any .80-.90 fork springs? __________________________________________________ HalfFast Racing Team Serving Greater Houston Area Riders:WFO Riders MotoHouston HPC CMRA Ride Smart Fastline Lone Star Track Days

May 21st, 2014, 10:26 AM	#21
Super Dave ninjette.org member Name: David Location: Roseville, CA Join Date: Jun 2013 Motorcycle(s): Ninja 300 Posts: 30	Trying to catch up on this thread guys. Here we go: Insane Pie: Have left side Stock rear sets. Out of the right side. Worldtraveller: No aftermarket rearsets available at the moment. subzero: PM sent AndrewW: Keeping the shipping to US only for now Triple R: I only have a RPM Rear Shock (needs a rebuild) I also have a BRT remote programer and a BRT Start switch. Dave __________________________________________________ David A. Seyl, Owner Feel Like A Pro, LLC

May 21st, 2014, 11:59 AM	#22
subxero dirty boy Name: Joe Location: Johnstown, PA Join Date: Sep 2012 Motorcycle(s): I don't even know anymore?? Posts: A lot. MOTM - Apr '14	__________________________________________________ I love the smell of burning pre-mix in the morning I don't think I'm a lot dumber than you thought that I think that I thought I was once.

May 21st, 2014, 01:08 PM	#24
Triple R ninjette.org member Name: D.Doan Location: Shark City Join Date: Jan 2013 Motorcycle(s): Suzuki's Posts: 40	PM Sent

May 22nd, 2014, 12:52 AM	#26
MrSavvy ninjette.org member Name: Crash dummy Location: Augusta, GA Join Date: May 2012 Motorcycle(s): 2009 Ninja 250R Posts: 106	Hey bud, I need an ignition/gas cap/rear seat lock set (with a matched key lol). Any chance you have a keyed set? Thanks Edit: for an '09.

May 22nd, 2014, 06:48 AM	#27
justdrew ninjette.org member Name: Drew Location: White Mountains, Maine Join Date: Aug 2011 Motorcycle(s): KLR, Ninja 250 Posts: 35	Would you still have a stock muffler in good condition?

May 26th, 2014, 02:44 PM	#29
MrSavvy ninjette.org member Name: Crash dummy Location: Augusta, GA Join Date: May 2012 Motorcycle(s): 2009 Ninja 250R Posts: 106	OP, you alive? lol

May 26th, 2014, 04:40 PM	#30
nickjpass #squid Name: nickypoo Location: Five Guys Join Date: Jul 2011 Motorcycle(s): Track dedicated 2008 ZX6R Posts: A lot. MOTM - Jul '16	any zx6r parts? __________________________________________________

May 29th, 2014, 03:39 PM	#31
Super Dave ninjette.org member Name: David Location: Roseville, CA Join Date: Jun 2013 Motorcycle(s): Ninja 300 Posts: 30	Hey Folks, Dealing with a little family emergency. I'll reply to all when I get back home (hopefully next week). Dave __________________________________________________ David A. Seyl, Owner Feel Like A Pro, LLC

May 29th, 2014, 05:52 PM	#33
AndrewW ninjette.org newbie Name: Andrew Location: Ireland Join Date: Apr 2014 Motorcycle(s): 2010 ninja 250r Posts: 8	No problem dude!

July 10th, 2014, 06:56 AM	#34
salcuta88 ninjette.org guru Name: Vlad Location: Weaverville, NC Join Date: Jul 2014 Motorcycle(s): 2011 Ninja 250R (Sold), 2015 Rocky Mountain Soul (Runs on fat) Posts: 404	Exhaust Do you have an aftermarket exhaust?

July 11th, 2014, 10:47 AM	#35
garth285 KAWASAKI GURU Name: Shawn Location: Florida Join Date: Jul 2013 Motorcycle(s): Turbo Ninja 250 Posts: 863	PM me a price on a 08+ cylinder head complete minus cams?

July 14th, 2014, 07:02 PM	#36
ninjakuma Stunts Extraodinar Name: Ninjakuma Location: Los Angeles Join Date: Jun 2014 Motorcycle(s): 1999 Ninja 250 Posts: 74	Do you have the spark plug boots and wires for a pregen 250?

July 20th, 2014, 01:45 AM	#37
Daks Jersey Devil Name: Daks Location: Austin, TX Join Date: Oct 2012 Motorcycle(s): '06 Ninja 250 Posts: 469	Have any pregen rear rotors and maybe a front one? Also perhaps clutch plates in decent shape? __________________________________________________ ~Riding like a grandma because I wanna ride as a grandma~

July 20th, 2014, 11:25 AM	#38
ninjakuma Stunts Extraodinar Name: Ninjakuma Location: Los Angeles Join Date: Jun 2014 Motorcycle(s): 1999 Ninja 250 Posts: 74	Do you have a any pregen mirrors or the metal bracket that holds them? __________________________________________________ Will backflip for tips

July 20th, 2014, 11:59 AM	#39
LNasty Daily Jap rider Name: Lance Location: La Porte Join Date: Dec 2012 Motorcycle(s): 2012 Ninja 250r Posts: A lot.	My reaction to this ginormous picture that you uploaded. .... tumblr_m4x4d9t9Dk1rrifv1o6_500.gif or more like this..... Link to original page on YouTube.

August 6th, 2014, 12:16 PM	#40
nadroj ninjette.org member Name: nadroj Location: 172.0.0.1 Join Date: Aug 2014 Motorcycle(s): zx6r ninjette a bunch of other ****** bikes Posts: 22	Got an straight handlebars for the 2nd get Everything on ebay is bent. THANKS! edit: PM me if you do and we can work out a price?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[crash.net - MotoGP] - Bautista: Lots of power, lots of work to do	Ninjette Newsbot	Motorcycling News	0	November 28th, 2014 06:23 AM
Lots of 300 and newgen parts for sale!	LittleRedNinjette	Motorcycle-related	21	September 22nd, 2014 01:20 PM
Wtb: Lots of parts 08+	t1m0xa	Items Wanted	4	December 31st, 2012 06:08 AM
Cleaning out the garage - LOTS of parts	gt_turbo	Motorcycle-related	23	June 13th, 2012 06:17 PM
[superbikeplanet.com] - And Lots And Lots And Lots Of Haybales	Ninjette Newsbot	Motorcycling News	0	March 13th, 2009 11:30 AM